Enter the test-oam context
16.0.R4
All
Enter the icmp context
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the ping-template list instance
configure test-oam icmp ping-template string
Commands in this context define timers and thresholds that determine the basis for
connectivity verification and influence the service IP interface's operational state. The
configuration of the ping template is located in the configure test-oam icmp context.
The configuration options are separated to allow different failure detection and
recovery behaviors.
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Ping template name
configure test-oam icmp ping-template string
1 to 64
This element is part of a list key.
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Text description
configure test-oam icmp ping-template string description string
1 to 80
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Dot1p in Ethernet header of outgoing ping packets
configure test-oam icmp ping-template string dot1p number
0 to 7
7
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
DSCP value used in the outgoing ping packet
configure test-oam icmp ping-template string dscp keyword
nc1
be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15, cs2, cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29, af33, cp31, cs4, cp33, af41, cp35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43, cp44, cp45, ef, cp47, nc1, cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57, cp58, cp59, cp60, cp61, cp62, cp63
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Failure threshold to declare inter-connectivity down
configure test-oam icmp ping-template string failure-threshold number
2 to 10
3
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Packet transmit interval
configure test-oam icmp ping-template string interval number
1 to 60
60
seconds
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Threshold of consecutive failures at reactivation
configure test-oam icmp ping-template string reactivation-failure-threshold number
This command configures the number of consecutive failures that must occur when transmitting at the reactivation interval without success before the transmission interval is changed to the standard interval.
1 to 10
4
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Ping reactivation interval
configure test-oam icmp ping-template string reactivation-interval number
This command configures the packet transmit interval used when the IP interface becomes operationally down because of a ping template failure after receiving a successful response to the previous ICMP echo request.
1 to 60
1
seconds
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Success threshold to declare inter-connectivity up
configure test-oam icmp ping-template string reactivation-threshold number
This command configures the minimum number of consecutive successful responses of ICMP replies that must occur before the IP interface transitions from operationally down (due to ping validation failure) to operationally up. This value is a stability metric intended to prevent flapping.
1 to 10
3
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Reactivation wait time before packet is declared lost
configure test-oam icmp ping-template string reactivation-timeout number
1 to 60
1
seconds
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Data field size of the outgoing ICMP echo packet
configure test-oam icmp ping-template string size number
12 to 9786
56
octets
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Wait time before ICMP echo request is declared lost
configure test-oam icmp ping-template string timeout number
1 to 60
5
seconds
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
TTL value for the outgoing ping packet
configure test-oam icmp ping-template string ttl number
This command configures the TTL value used in the outgoing ping packet. The tested interface must be directly connected on the same subnet.
1 to 255
1
20.10.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the link-measurement context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the measurement-template list instance
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Measurement template name
1 to 64
This element is part of a list key.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Administrative state of the measurement template
configure test-oam link-measurement measurement-template string admin-state keyword
disable
enable, disable
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the aggregate-sample-window context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Number of sample windows in the aggregate sample window
1 to 12
12
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the threshold context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Absolute time delta for delay measurement reporting
1 to 100000
microseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Relative time delta for delay measurement reporting
1 to 100
percent
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Sample percentage required for window integrity report
1 to 100
percent
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Delay measurement statistic type
configure test-oam link-measurement measurement-template string delay keyword
min
min, max, avg
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Configure a text description for the template
configure test-oam link-measurement measurement-template string description string
1 to 80
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Interval between test packet transmissions
configure test-oam link-measurement measurement-template string interval number
1 to 10
1
seconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Time to wait to flush the last reported delay
0 | 1 to 86400
86400
seconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the sample-window context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Multiplier used for sample-window probes
configure test-oam link-measurement measurement-template string sample-window multiplier number
1 to 900
10
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the threshold context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Absolute time delta for delay measurement reporting
1 to 100000
microseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Configure the relative (percentage) amount of time by which a new measurement must exceed the last reported measurement to be deemed worthy of reporting
1 to 500
percent
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Sample percentage required for window integrity report
1 to 100
percent
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the twamp-light context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Allow overwrite of DSCP value by the egress QoS policy
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Process IPv6 packets with UDP check sum zero
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Destination UDP port used by link measurement tests
1 to 65535
862
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
DSCP copied to TWAMP light echo request packet header
configure test-oam link-measurement measurement-template string twamp-light dscp keyword
nc1
be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15, cs2, cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29, af33, cp31, cs4, cp33, af41, cp35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43, cp44, cp45, ef, cp47, nc1, cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57, cp58, cp59, cp60, cp61, cp62, cp63
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Forwarding class name for the TWAMP light packet
configure test-oam link-measurement measurement-template string twamp-light fc keyword
h1
be, l2, af, l1, h2, ef, h1, nc
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
QoS profile for packet treatment in local node
configure test-oam link-measurement measurement-template string twamp-light profile keyword
in
in, out
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Format of the timestamp used in TWAMP light PDU packet
configure test-oam link-measurement measurement-template string twamp-light timestamp-format keyword
ntp
ntp, ptp
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Time to live value used in the TWAMP light test packet
configure test-oam link-measurement measurement-template string twamp-light ttl number
1 to 255
1
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Method used to compute the unidirectional delay value
derived
derived, actual
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the mpls-dm context
16.0.R6
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Administrative state of MPLS DM packet processing
configure test-oam mpls-dm admin-state keyword
disable
enable, disable
16.0.R6
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the twamp context
16.0.R4
All
Enter the server context
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Administrative state of the TWAMP server
configure test-oam twamp server admin-state keyword
disable
enable, disable
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
![]() | Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
System wide inactivity timeout for each TWAMP server control connection
60 to 3600
900
seconds
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
![]() | Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
System wide maximum number of concurrent TWAMP server control connections
configure test-oam twamp server max-connections number
0 to 64
32
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
![]() | Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
System wide maximum number of concurrent TWAMP server test sessions
configure test-oam twamp server max-sessions number
0 to 128
32
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the prefix list instance
100
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Prefix to match against TWAMP client address
This element is part of a list key.
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Text description
1 to 80
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Maximum number of control connections for TWAMP prefix
0 to 64
32
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Maximum concurrent TWAMP test sessions based on prefix
0 to 128
32
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the twamp-light context
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Time to maintain stale state on the session reflector
10 to 100
100
seconds
16.0.R4
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS