On the 7210 SAS-Sx 64x10GE+4x100GE (es64-10gb-sfpp+4-100gb-cfp4) and 64x10GE+4xQSFP28 (sat-type es64-10gb-sfpp+4-100gb-qsfp28) satellite, selected 10GE ports can be reconfigured and used as satellite uplinks to the host router running SR OS.
Up to 16 10GE interfaces can be used as uplinks for the associated satellite. A new satellite template that configures the needed 10GE interfaces as uplinks must be created. In addition, use a port template to specify the uplink association between the remaining client ports and configured uplinks.
Apply the new template to the satellite using the config>system>satellite>eth-sat sat-id>sat-type sat-type>port-template template-name command, where the template-name is the name configured in the port-template context.
This feature requires the 7210 SAS-Sx to be running Release 9.0.R10 or later for the SAS-Sx 64x10GE+4x100GE and 7210 SAS Release 10.0 or later for the 64x10GE+4xqSFP28 satellite.
The following restrictions apply:
The 10GE ports used as satellite uplinks must start at port 1 and be sequential, up to the maximum of 16 10GE uplinks.
When 10GE ports are used as uplinks, the 4x100GE port are not available for use and should be configured as role none.
The following is an example configuration:
config>system
satellite
port-template "10gUp" sat-type "es64-10gb-sfpp+4-100gb-cfp4" create
port 1/1/1
role uplink
uplink none
exit
port 1/1/2
role uplink
uplink none
exit
port 1/1/3
role uplink
uplink none
exit
port 1/1/4
role uplink
uplink none
exit
...
port 1/1/9
uplink 1/1/1
exit
port 1/1/10
...
port 1/1/16
uplink 1/1/2
exit
...
port 1/1/65
role none
exit
port 1/1/66
role none
exit
...
no shutdown
exit
eth-sat 20 create
mac-address d0:99:d5:96:ee:41
sat-type "es64-10gb-sfpp+4-100gb-cfp4" port-template "10gUp"
software-repository "rep1"
no shutdown
exit
exit
exit