Configuring power supply parameters

The following is an example for the 7750 SR and 7950 XRS:


A:ALA-12>config>system# info
-----------------------------------------------------------------
..
        name "ALA-12"
        contact "Fred Information Technology"
        location "Bldg.1-floor 2-Room 201"
        clli-code "abcdefg1234"
        coordinates "N 45 58 23, W 34 56 12"
        power-supply 1 dc
        power-supply 2 dc
        lacp-system-priority 1
        sync-if-timing
            begin
            ref-order ref1 ref2 bits
            ref1
                shutdown
            exit
            ref2
                shutdown
            exit
            bits
                shutdown
                interface-type ds1 esf
            exit
            commit
        exit
..

The following is an example for the 7450 ESS:


-----------------------------------------------------------------
A:ALA-12>config>system# info
-----------------------------------------------------------------
..
        name "ALA-12"
        contact "Fred Information Technology"
        location "Bldg.1-floor 2-Room 201"
        clli-code "abcdefg1234"
        coordinates "N 45 58 23, W 34 56 12"
        power-supply 1 dc
        power-supply 2 dc
        lacp-system-priority 1
        sync-if-timing
            begin
            ref-order ref1 ref2 bits
            ref1
                shutdown
            exit
            ref2
                shutdown
            exit
            bits
                shutdown
                interface-type ds1 esf
            exit
            commit
        exit
..
-----------------------------------------------------------------
A:ALA-12>config>system#