Debug configuration

The debug configuration commands enable detailed debugging information for various protocols. When debugging is configured in mixed or model-driven management mode, the following usage guidelines apply:

If the commands are available in the MD-CLI, the MD-CLI commands must be used to configure debugging. The classic CLI cannot be used.
If the commands are not available in the MD-CLI, the classic CLI must be used to configure debugging.
Debug configuration commands entered in the MD-CLI are displayed in the MD-CLI. Debug commands entered in the classic CLI are not displayed in the MD-CLI info and admin show configuration debug output.
Debug configuration commands entered in the classic CLI and the MD-CLI are displayed in the classic CLI show debug output