Basic configuration

The following fields require specific input (there are no defaults) to configure a basic VPLS service:

The following example shows a configuration of a local VPLS service on ALA-1.

*A:ALA-1>config>service>vpls# info
----------------------------------------------
...
        vpls 9001 customer 6 create
            description "Local VPLS"
            stp
                shutdown
            exit
            sap 1/2/2:0 create
                description "SAP for local service"
            exit
            sap 1/1/5:0 create
                description "SAP for local service"
            exit
            no shutdown
----------------------------------------------
*A:ALA-1>config>service>vpls#

The following example shows a configuration of a distributed VPLS service between ALA-1, ALA-2, and ALA-3.

*A:ALA-1>config>service# info
----------------------------------------------
...
        vpls 9000 customer 6 create
            shutdown
            description "This is a distributed VPLS."
        exit
...
----------------------------------------------
*A:ALA-1>config>service#

*A:ALA-2>config>service# info
----------------------------------------------
...
        vpls 9000 customer 6 create
            description "This is a distributed VPLS."
            stp
                shutdown
            exit
            sap 1/1/5:16 create
                description "VPLS SAP"
            exit
            spoke-sdp 2:22 create
            exit
            mesh-sdp 8:750 create
            exit
            no shutdown
        exit
...
----------------------------------------------
*A:ALA-2>config>service#

*A:ALA-3>config>service# info
----------------------------------------------
...
        vpls 9000 customer 6 create
            description "This is a distributed VPLS."
            stp
                shutdown
            exit
            sap 1/1/3:33 create
                description "VPLS SAP"
            exit
            spoke-sdp 2:22 create
            exit
            mesh-sdp 8:750 create
            exit
            no shutdown
        exit
...
----------------------------------------------
*A:ALA-3>config>service#