Node-1: Using operational groups and Ethernet CFM per SAP
#--------------------------------------------------
echo "Eth-CFM Configuration"
#--------------------------------------------------
eth-cfm
domain 100 format none level 3
association 2 format icc-based name "node-3-site-1-0"
bridge-identifier 1
exit
remote-mepid 310
exit
association 2 format icc-based name "node-3-site-1-1"
bridge-identifier 100
exit
remote-mepid 311
exit
exit
exit
#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
service
customer 1 create
description "Default customer"
exit
sdp 2 mpls create
far-end 10.1.1.4
lsp "to-node-4-lsp-1"
keep-alive
shutdown
exit
no shutdown
exit
sdp 3 mpls create // Etcetera
pw-template 1 create
vc-type vlan
exit
oper-group "og-name-et" create
exit
oper-group "og-name-et100" create
exit
epipe 1 customer 1 create
service-mtu 500
bgp
route-distinguisher 65000:1
route-target export target:65000:1 import target:65000:1
exit
site "site-1" create
site-id 1
sap 1/1/2:1.1
boot-timer 100
site-activation-timer 2
no shutdown
exit
endpoint "x" create
exit
endpoint "y" create
exit
sap 1/1/2:1.1 endpoint "x" create
eth-cfm
mep 130 domain 100 association 2 direction down
fault-propagation-enable use-if-tlv
ccm-enable
no shutdown
exit
exit
oper-group "og-name-et"
exit
spoke-sdp 2:1 endpoint "y" create
precedence primary
no shutdown
exit
spoke-sdp 3:1 endpoint "y" create
precedence 2
no shutdown
exit
no shutdown
exit
epipe 100 customer 1 create
description "Epipe 100 in separate opergroup"
service-mtu 500
bgp
route-distinguisher 65000:2
route-target export target:65000:2 import target:65000:2
exit
site "site-name-et100" create
site-id 1101
sap 1/1/4:1.100
boot-timer 100
site-activation-timer 2
no shutdown
exit
endpoint "x" create
exit
endpoint "y" create
exit
sap 1/1/4:1.100 endpoint "x" create
eth-cfm
mep 131 domain 1 association 2 direction down
fault-propagation-enable use-if-tlv
ccm-enable
no shutdown
exit
exit
oper-group "og-name-et100"
exit
spoke-sdp 2:2 vc-type vlan endpoint "y" create
precedence 1
no shutdown
exit
spoke-sdp 3:2 vc-type vlan endpoint "y" create
precedence 2
no shutdown
exit
no shutdown
exit
exit
#--------------------------------------------------
echo "BGP Configuration"
#--------------------------------------------------
bgp
rapid-withdrawal
rapid-update l2-vpn
group "internal"
type internal
neighbor 10.1.1.2
family l2-vpn
exit
exit
exit
exit
Node-3: Using operational groups and Ethernet CFM per SAP
#--------------------------------------------------
echo "Eth-CFM Configuration"
#--------------------------------------------------
eth-cfm
domain 100 format none level 3
association 2 format icc-based name "node-3-site-1-0"
bridge-identifier 1
exit
ccm-interval 1
remote-mepid 130
exit
association 2 format icc-based name "node-3-site-1-1"
bridge-identifier 100
exit
ccm-interval 1
remote-mepid 131
association 3 format icc-based name "node-3-site-2-0"
bridge-identifier 1
exit
ccm-interval 1
remote-mepid 120
exit
association 3 format icc-based name "node-3-site-2-1"
bridge-identifier 100
exit
ccm-interval 1
remote-mepid 121
exit
exit
exit
#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
eth-tunnel 1
description "Eth Tunnel loadsharing mode QinQ example"
protection-type loadsharing
ethernet
encap-type qinq
exit
path 1
member 1/1/3
control-tag 1.1
eth-cfm
mep 310 domain 100 association 2
ccm-enable
control-mep
no shutdown
exit
exit
no shutdown
exit
path 2
member 1/1/4
control-tag 1.2
eth-cfm
mep 320 domain 100 association 3
ccm-enablepath
control-mep
no shutdown
exit
exit
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "Ethernet Tunnel Configuration"
#--------------------------------------------------
eth-tunnel 2
description "Eth Tunnel QinQ"
revert-time 10
path 1
precedence primary
member 1/1/1
control-tag 1.100
eth-cfm
mep 311 domain 100 association 2
ccm-enable
control-mep
no shutdown
exit
exit
no shutdown
exit
path 2
member 1/1/2
control-tag 1.100
eth-cfm
mep 321 domain 100 association 3
ccm-enable
control-mep
no shutdown
exit
exit
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
service
epipe 1 customer 1 create
sap 2/1/2:1.1 create
exit
sap eth-tunnel-1 create
exit
no shutdown
exit
epipe 100 customer 1 create
service-mtu 500
sap 2/1/10:1.100 create
exit
sap eth-tunnel-2 create
exit
no shutdown
exit