In this example, the SAPs monitoring the operational groups do not need CFM if the corresponding SAP on the CE side is using fate sharing.
#--------------------------------------------------
echo "Service Configuration" Oper-groups
#--------------------------------------------------
service
customer 1 create
description "Default customer"
exit
sdp 2 mpls create
...
exit
pw-template 1 create
vc-type vlan
exit
oper-group "og-name-et" create
exit
epipe 1 customer 1 create
service-mtu 500
bgp
route-distinguisher 65000:1
route-target export target:65000:1 import target:65000:1
exit
site "site-1" create
site-id 1
sap 1/1/2:1.1
boot-timer 100
site-activation-timer 2
no shutdown
exit
endpoint "x" create
exit
endpoint "y" create
exit
sap 1/1/2:1.1 endpoint "x" create
eth-cfm
mep 130 domain 100 association 1 direction down
fault-propagation-enable use-if-tlv
ccm-enable
no shutdown
exit
exit
oper-group "og-name-et"
exit
spoke-sdp 2:1 endpoint "y" create
precedence primary
no shutdown
exit
spoke-sdp 3:1 endpoint "y" create
precedence 2
no shutdown
exit
no shutdown
exit
epipe 2 customer 1 create
description "Epipe 2 in opergroup with Epipe 1"
service-mtu 500
bgp
route-distinguisher 65000:2
route-target export target:65000:2 import target:65000:2
exit
endpoint "x" create
exit
endpoint "y" create
exit
sap 1/1/2:1.2 endpoint "x" create
monitor-oper-group "og-name-et"
exit
spoke-sdp 2:2 vc-type vlan endpoint "y" create
precedence 1
no shutdown
exit
spoke-sdp 3:2 vc-type vlan endpoint "y" create
precedence 2
no shutdown
exit
no shutdown
exit
exit
#--------------------------------------------------
echo "Eth-CFM Configuration"
#--------------------------------------------------
eth-cfm
domain 100 format none level 3
association 1 format icc-based name "node-3-site-1-0"
bridge-identifier 1
exit
ccm-interval 1
remote-mepid 130
exit
association 2 format icc-based name "node-3-site-2-0"
bridge-identifier 2
exit
ccm-interval 1
remote-mepid 120
exit
exit
exit
#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
eth-tunnel 2
description "Eth Tunnel loadsharing mode QinQ example"
protection-type loadsharing
ethernet
encap-type qinq
exit
path 1
member 1/1/1
control-tag 1.1
eth-cfm
mep 310 domain 100 association 1
ccm-enable
control-mep
no shutdown
exit
exit
no shutdown
exit
path 2
member 1/1/2
control-tag 1.1
eth-cfm
mep 320 domain 100 association 2
ccm-enablepath
control-mep
no shutdown
exit
exit
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
service
epipe 1 customer 1 create
sap 1/10/1:1 create
exit
sap eth-tunnel-1 create
exit
no shutdown
exit
#--------------------------------------------------
echo "Service Configuration for a shared fate Ethernet Tunnel"
#--------------------------------------------------
epipe 2 customer 1 create
sap 1/10/2:3 create
exit
sap eth-tunnel-1:2 create
eth-tunnel
path 1 tag 1.2
path 2 tag 1.2
exit
exit
no shutdown
exit