Configuring GSMP parameters

The following parameters must be configured in order for GSMP to function:

Use the following CLI syntax to configure GSMP parameters.

CLI syntax:

config>service>vpls# gsmp
    — group name [create]
        — ancp
            — dynamic-topology-discover
            — oam
        — description description-string
        — hold-multiplier multiplier
        — keepalive seconds
        — neighbor ip-address [create]
            — description v
            — local-address ip-address
            — priority-marking dscp dscp-name
            — priority-marking prec ip-prec-value
            — [no] shutdown
        — [no] shutdown
    — [no] shutdown

This example shows a GSMP group configuration.

A:ALA-48>config>service>vpls>gsmp# info
----------------------------------------------
                group "group1" create
                    description "test group config"
                    neighbor 10.10.10.104 create
                        description "neighbor1 config"
                        local-address 10.10.10.103
                        no shutdown
                    exit
                    no shutdown
                exit
                no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls>gsmp#