Configuring multi-chassis endpoints

The following output shows configuration examples of multi-chassis redundancy and the VPLS configuration. The configurations in the graphics depicted in Inter-domain VPLS resiliency using multi-chassis endpoints are represented in this output.

Node mapping to the following examples in this section:

PE3 Dut-B

*A:Dut-B>config>redundancy>multi-chassis# info 
----------------------------------------------
            peer 10.1.1.3 create
                peer-name "Dut-C"
                description "mcep-basic-tests"
                source-address 10.1.1.2
                mc-endpoint
                    no shutdown
                    bfd-enable
                    system-priority 50
                exit
                no shutdown
            exit 
----------------------------------------------
*A:Dut-B>config>redundancy>multi-chassis#


*A:Dut-B>config>service>vpls# info 
----------------------------------------------
            fdb-table-size 20000
            send-flush-on-failure
            stp
                shutdown
            exit
            endpoint "mcep-t1" create
                no suppress-standby-signaling
                block-on-mesh-failure
                mc-endpoint 1
                    mc-ep-peer Dut-C
                exit
            exit
            mesh-sdp 201:1 vc-type vlan create
            exit
            mesh-sdp 211:1 vc-type vlan create
            exit
            spoke-sdp 221:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
                precedence 1          
            exit
            spoke-sdp 231:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
                precedence 2
            exit
            no shutdown
----------------------------------------------
*A:Dut-B>config>service>vpls#

PE3' Dut-C

:Dut-C>config>redundancy>multi-chassis# info 
----------------------------------------------
            peer 10.1.1.2 create
                peer-name "Dut-B"
                description "mcep-basic-tests"
                source-address 10.1.1.3
                mc-endpoint
                    no shutdown
                    bfd-enable
                    system-priority 21
                exit
                no shutdown
            exit 
----------------------------------------------
*A:Dut-C>config>redundancy>multi-chassis# 

*A:Dut-C>config>service>vpls# info 
----------------------------------------------
            fdb-table-size 20000
            send-flush-on-failure
            stp
                shutdown
            exit
            endpoint "mcep-t1" create
                no suppress-standby-signaling
                block-on-mesh-failure
                mc-endpoint 1
                    mc-ep-peer Dut-B
                exit
            exit
            mesh-sdp 301:1 vc-type vlan create
            exit
            mesh-sdp 311:1 vc-type vlan create
            exit
            spoke-sdp 321:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
                precedence 3
            exit
            spoke-sdp 331:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
            exit
            no shutdown
----------------------------------------------
*A:Dut-C>config>service>vpls# 

PE1 Dut-D

*A:Dut-D>config>redundancy>multi-chassis# info 
----------------------------------------------
            peer 10.1.1.5 create
                peer-name "Dut-E"
                description "mcep-basic-tests"
                source-address 10.1.1.4
                mc-endpoint
                    no shutdown
                    bfd-enable
                    system-priority 50
                    passive-mode
                exit
                no shutdown
            exit 
----------------------------------------------
*A:Dut-D>config>redundancy>multi-chassis# 

*A:Dut-D>config>service>vpls# info 
----------------------------------------------
            fdb-table-size 20000
            propagate-mac-flush
            stp
                shutdown
            exit
            endpoint "mcep-t1" create
                block-on-mesh-failure
                mc-endpoint 1
                    mc-ep-peer Dut-E
                exit
            exit
            mesh-sdp 401:1 vc-type vlan create
            exit
            spoke-sdp 411:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
                precedence 2
            exit
            spoke-sdp 421:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
                precedence 1
            exit
            mesh-sdp 431:1 vc-type vlan create
            exit
            no shutdown
----------------------------------------------
*A:Dut-D>config>service>vpls# 

PE2 Dut-E

*A:Dut-E>config>redundancy>multi-chassis# info 
----------------------------------------------
            peer 10.1.1.4 create
                peer-name "Dut-D"
                description "mcep-basic-tests"
                source-address 10.1.1.5
                mc-endpoint
                    no shutdown
                    bfd-enable
                    system-priority 22
                    passive-mode
                exit
                no shutdown
            exit 
----------------------------------------------
*A:Dut-E>config>redundancy>multi-chassis#  

*A:Dut-E>config>service>vpls# info 
----------------------------------------------
            fdb-table-size 20000
            propagate-mac-flush
            stp
                shutdown
            exit
            endpoint "mcep-t1" create
                block-on-mesh-failure
                mc-endpoint 1
                    mc-ep-peer Dut-D
                exit
            exit
            spoke-sdp 501:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
                precedence 3
            exit
            spoke-sdp 511:1 vc-type vlan endpoint "mcep-t1" create
                stp
                    shutdown
                exit
                block-on-mesh-failure
            exit
            mesh-sdp 521:1 vc-type vlan create
            exit
            mesh-sdp 531:1 vc-type vlan create
            exit
            no shutdown
----------------------------------------------
*A:Dut-E>config>service>vpls#