Configuring overrides on service SAPs

The following output shows a service SAP queue override configuration example:

*A:ALA-48>config>service>vpls>sap# info
----------------------------------------------
...
exit
ingress
    scheduler-policy "SLA1"
    scheduler-override
        scheduler "sched1" create
            parent weight 3 cir-weight 3
        exit
    exit
    policer-control-policy "SLA1-p"
    policer-control-override create
        max-rate 50000
    exit
    qos 100 multipoint-shared
    queue-override
        queue 1 create
            rate 1500000 cir 2000
        exit
    exit
    policer-override
        policer 1 create
            rate 10000
        exit
    exit
exit
egress
    scheduler-policy "SLA1"
    policer-control-policy "SLA1-p"
    policer-control-override create
        max-rate 60000
    exit
    qos 100
    queue-override
        queue 1 create
            adaptation-rule pir max cir max
        exit
    exit
    policer-override
        policer 1 create
            mbs 2000 kilobytes
        exit
    exit
    filter ip 10
exit
----------------------------------------------
*A:ALA-48>config>service>vpls>sap#
Figure: SDPs — unidirectional tunnels

Use the following CLI syntax to create mesh or spoke-SDP bindings with a distributed VPLS service. SDPs must be configured before binding. For information about creating SDPs, see the 7450 ESS, 7750 SR, 7950 XRS, and VSR Services Overview Guide.

Use the following CLI syntax to configure mesh SDP bindings.

CLI syntax:

config>service# vpls service-id 
    — mesh-sdp sdp-id[:vc-id] [vc-type {ether | vlan}]
        — egress
            — filter {ip ip-filter-id|mac mac-filter-id}
            — mfib-allowed-mda-destinations
                    — mda mda-id
            — vc-label egress-vc-label
        — ingress
            — filter {ip ip-filter-id|mac mac-filter-id}
            — vc-label ingress-vc-label
        — no shutdown
        — static-mac ieee-address
        — vlan-vc-tag 0..4094

Use the following CLI syntax to configure spoke-SDP bindings.

CLI syntax:

config>service# vpls service-id 
    — spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}] [split-horizon-group group-name] 
        — egress
            — filter {ip ip-filter-id|mac mac-filter-id}
            — vc-label egress-vc-label
        — ingress
            — filter {ip ip-filter-id|mac mac-filter-id}
            — vc-label ingress-vc-label
        — limit-mac-move[non-blockable]
        — vlan-vc-tag 0..4094
        — no shutdown
        — static-mac ieee-address
        — stp
            — path-cost stp-path-cost
            — priority stp-priority
            — no shutdown
        — vlan-vc-tag [0..4094]

The following examples show SDP binding configurations for ALA-1, ALA-2, and ALA-3 for VPLS service ID 9000 for customer 6:


*A:ALA-1>config>service# info
----------------------------------------------
...
        vpls 9000 customer 6 create
            description "This is a distributed VPLS."
            stp
                shutdown
            exit
            sap 1/2/5:0 create
            exit
            spoke-sdp 2:22 create
            exit
            mesh-sdp 5:750 create
            exit
            mesh-sdp 7:750 create
            exit
            no shutdown
        exit
----------------------------------------------
*A:ALA-1>config>service#


*A:ALA-2>config>service# info
----------------------------------------------
...
        vpls 9000 customer 6 create
            description "This is a distributed VPLS."
            stp
                shutdown
            exit
            sap 1/1/2:22 create
            exit
            spoke-sdp 2:22 create
            exit
            mesh-sdp 5:750 create
            exit
            mesh-sdp 7:750 create
            exit
            no shutdown
        exit
----------------------------------------------


*A:ALA-3>config>service# info
----------------------------------------------
...
        vpls 9000 customer 6 create
            description "This is a distributed VPLS."
            stp
                shutdown
            exit
            sap 1/1/3:33 create
            exit
            spoke-sdp 2:22 create
            exit
            mesh-sdp 5:750 create
            exit
            mesh-sdp 7:750 create
            exit
            no shutdown
        exit
----------------------------------------------
*A:ALA-3>config>service#