Deleting an Ipipe service

An Ipipe service cannot be deleted until the SAP is shut down. If protocols and, or a spoke-SDP are defined, they must be shut down and removed from the configuration as well.

Use the following CLI syntax to delete an Ipipe service.

CLI syntax:

config>service#
    — no ipipe service-id 
        — shutdown
        — no sap sap-id
            — shutdown
        — no spoke-sdp [sdp-id:vc-id]
            — shutdown

Example:

config>service# ipipe 207
config>service>ipipe# sap 1/1/2:449
config>service>ipipe>sap# shutdown
config>service>ipipe>sap# exit
config>service>ipipe# no sap 1/1/2:449
config>service>ipipe# spoke-sdp 16:516
config>service>ipipe>spoke-sdp# shutdown
config>service>ipipe>spoke-sdp# exit
config>service>ipipe# no spoke-sdp 16:516
config>service>ipipe# exit
config>service# no ipipe 207
config>service#