In addition to the B-VPLS considerations described in section Interaction of EVPN-VXLAN and EVPN-MPLS with existing VPLS features, the following specific interactions for PBB-EVPN should also be considered:
When bgp-evpn mpls is enabled in a b-vpls service, an i-vpls service linked to that b-vpls cannot be an R-VPLS (the allow-ip-int-bind command is not supported).
The ISID value of 0 is not allowed for PBB-EVPN services (I-VPLS and Epipes).
The ethernet-segments can be associated with b-vpls SAPs/SDP bindings and i-vpls/epipe SAPs/SDP bindings,; however, the same ES cannot be associated with b-vpls and i-vpls/epipe SAP or SDP bindings at the same time.
When PBB-Epipes are used with PBB-EVPN multihoming, spoke SDPs are not supported on ethernet-segments.
When bgp-evpn mpls is enabled, eth-tunnels are not supported in the b-vpls instance.