Modifying a Cpipe service

The following example shows the Cpipe service configuration, supported on the 7750 SR only:

*A:ALA-1>config>service# info
----------------------------------------------
...
        cpipe 94002 customer 1 vc-type cesopsn create
            endpoint "to7705" create
            exit
            endpoint "toMC-APS" create
            exit
            sap aps-4.10.1.2.1 endpoint "toMC-APS" create
                ingress
                    qos 20 
                exit
            exit
            spoke-sdp 14004:94002 endpoint "to7705" create
            exit
            spoke-sdp 100:294002 endpoint "toMC-APS" icb create
            exit
            spoke-sdp 100:194002 endpoint "to7705" icb create
            exit
            no shutdown
        exit
...
----------------------------------------------
*A:ALA-1>config>service> Cpipe#