Modifying Ipipe service parameters

The following example shows the command usage to modify Ipipe parameters, supported on the 7450 ESS and 7750 SR only.

Example:

config>service# ipipe 202
config>service>ipipe# sap 1/1/2:444
config>service>ipipe>sap# shutdown
config>service>ipipe>sap# exit
config>service>ipipe# no sap 1/1/2:444
config>service>ipipe# sap 1/1/2:555 create
config>service>ipipe>sap$ description ‟eth_ipipe”
config>service>ipipe>sap$ ce-address 10.31.31.1
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit
config>service>ipipe# info
A:ALA-48>config>service# info
----------------------------------------------
...
        ipipe 202 customer 1 create
            sap 1/1/2:445 create
                description "eth_ipipe"
                ce-address 10.31.31.2
            exit
            sap 1/1/2:555 create
                description "eth_ipipe"
                ce-address 10.31.31.1
            exit
            no shutdown
        exit
...
----------------------------------------------
A:ALA-48>config>service#