Configuring VPRN log parameters

The following output displays a VPRN log configuration example.

B:Dut-C>config>service>vprn# info 
----------------------------------------------
            dhcp
                local-dhcp-server "vprn_1" create
                    use-pool-from-client
                    force-renews
                    no shutdown
                exit
            exit
            snmp
                 community "YsMv96H2KZVKQeakNAq.38gvyr.MH9vA" hash2 r version both
                 community "gkYL94l90FFgu91PiRNvn3Rnl0edkMU1" hash2 rw version v2c
                 access
            log
                filter 1 
                    default-action forward
                    entry 1 
                        action forward
                    exit 
                exit 
                syslog 1
                    address 3ffe::e01:403
                    log-prefix "vprn1"
                exit 
                snmp-trap-group 32001
                    trap-target "3" address 3ffe::e01:403 port 9000 snmpv2c notify-
community "vprn1"
                exit 
                log-id 1 
                    filter 1 
                    from main change 
                    to syslog 1
                exit 
                log-id 3 
                    filter 1 
                    from main change 
                    to snmp
                exit 
            exit
...
----------------------------------------------
B:Dut-C>config>service>vprn#