VPRN BGP CLI syntax

Use the CLI syntax to configure VPRN BGP parameters.

The following example displays a VPRN BGP configuration:

*A:ALA-1>config>service# info 
----------------------------------------------
...
        vprn 1 customer 1 create
            vrf-import "vrfImpPolCust1"
            vrf-export "vrfExpPolCust1"
            ecmp 8
            autonomous-system 10000
            route-distinguisher 10001:1
            auto-bind-tunnel
                resolution filter
                resolution-filter ldp
            vrf-target target:10001:1
            interface "to-ce1" create
                address 10.1.0.1/24
                sap 1/1/10:1 create
                    ingress
                        scheduler-policy "SLA2"
                        qos 100
                    exit
                    egress
                        scheduler-policy "SLA1"
                        qos 1010
                        filter ip 6
                    exit
                exit
            exit
            static-route-entry 10.5.0.0/24   
                next-hop 10.1.1.2
            bgp
                router-id 10.0.0.1
                group "to-cel"
                    export "vprnBgpExpPolCust1"
                    peer-as 65101
                    neighbor 10.1.1.2
                    exit
                exit
            exit
            spoke-sdp 2 create
            exit
            no shutdown
        exit
...
----------------------------------------------
*A:ALA-1>config>service#