Non-applicable HSQ IOM functions

As the HSQ IOM traffic manager replaces several egress FP QoS functions, the following configurations are not applicable to an HSQ IOM:

• QoS related

  • advanced configuration policies

  • egress access and network MDA and port pools

  • egress agg-rate queue-frame-based-accounting

  • egress H-QoS virtual scheduling, including Vports

  • FP egress queue

    • drop tails and CBS

    • WRED per queue (an HSQ equivalent is available)

    • CIR

    • highplus slope in a slope policy

    • burst limit (an HSQ equivalent is available)

    • dynamic MBS

    • network queue MBS (replaced by the hs-mbs command)

  • multi-service sites

  • PBB egress B-SAP per ISID shaping

• subscriber related

  • Access Node Control Protocol Management (ANCP)

  • PCC rule-based subscriber services (Gx or RADIUS)

  • Web Authentication Protocol (WPP)

• MPLS related

  • Generalized Multiprotocol Label Switching (GMPLS) UNI

• Service related

  • G.8031 protected Ethernet tunnels

• System related

  • Ethernet satellite host ports

  • port cross-connects (PXC)

  • Sflow