DSM accounting

In Distributed Subscriber Management (DSM), a single accounting session per UE is started. A unique Accounting-Session-ID per UE is generated. An Acct-Multi-Session-Id is also generated but currently not used to link any accounting sessions.

Acct-Status-Type and Acct-Session-Id are always included by default. The presence of all other attributes is dictated by configuration (config>aaa>isa-radius-policy name acct-include-attributes). Unless otherwise stated in a note, the attribute description and limits are the same as for Enhanced Subscriber Management (ESM) Accounting (Table: Enhanced Subscriber Management accounting (description) and Table: Enhanced Subscriber Management accounting (limits)), Table: Distributed Subscriber Management accounting (applicability) provides an overview of the applicability of the attributes in DSM accounting messages.

Accounting On and Accounting Off messages are generated when a server is enabled or disabled in an isa-radius-policy (config>aaa>isa-radius-policy name servers id>[no] shutdown). An accounting-On is also generated every 5 minutes for a RADIUS server that is unresponsive.

Table: Distributed Subscriber Management accounting (applicability)
Attribute ID Attribute name Acct start Acct stop Acct interim-update Acct on (*) Acct off (*)

1

User-Name

0-1

0-1

0-1

0

0

5

NAS-Port

0-1

0-1

0-1

1

1

8

Framed-IP-Address

0-1

0-1

0-1

0

0

9

Framed-IP-Netmask

0-1

0-1

0-1

0

0

25

Class

0+

0+

0+

0

0

30

Called-Station-Id

0-1

0-1

0-1

0-1

0-1

31

Calling-Station-Id

0-1

0-1

0-1

0

0

32

NAS-Identifier

0-1

0-1

0-1

0-1

0-1

40

Acct-Status-Type

1

1

1

1

1

41

Acct-Delay-Time

0-1

0-1

0-1

0

0

42

Acct-Input-Octets

0-1

0-1

0-1

0

0

43

Acct-Output-Octets

0-1

0-1

0-1

0

0

44

Acct-Session-Id

1

1

1

1

1

46

Acct-Session-Time

0-1

0-1

0-1

0-1

0-1

47

Acct-Input-Packets

0-1

0-1

0-1

0

0

48

Acct-Output-Packets

0-1

0-1

0-1

0

0

49

Acct-Terminate-Cause

0

0-1

0

0-1

0-1

50

Acct-Multi-Session-Id

0-1

0-1

0-1

0

0

52

Acct-Input-Gigawords

0-1

0-1

0-1

0

0

53

Acct-Output-Gigawords

0-1

0-1

0-1

0

0

55

Event-Timestamp

0-1

0-1

0-1

0-1

0-1

61

NAS-Port-Type

0-1

0-1

0-1

0

0

87

NAS-Port-Id

0-1

0-1

0-1

0

0

97

Framed-IPv6-Prefix

0-1

0-1

0-1

0

0

26.3561.1

Agent-Circuit-Id

0-1

0-1

0-1

0

0

26.3561.2

Agent-Remote-Id

0-1

0-1

0-1

0

0

26.6527.11

Alc-Subsc-ID-Str

0-1

0-1

0-1

0

0

26.6527.19

Alc-Acct-I-Inprof-Octets-64 1

0

0-1

0-1

0

0

26.6527.21

Alc-Acct-O-Inprof-Octets-641

0

0-1

0-1

0

0

26.6527.23

Alc-Acct-I-Inprof-Pkts-641

0

0-1

0-1

0

0

26.6527.25

Alc-Acct-O-Inprof-Pkts-641

0

0-1

0-1

0

0

26.6527.27

Alc-Client-Hardware-Addr

0-1

0-1

0-1

0

0

26.6527.36

Alc-DHCP-Vendor-Class-Id

0-1

0-1

0-1

0

0

26.6527.96

Alc-Credit-Control-Quota

0-1

0-1

0-1

0

0

26.6527.99

Alc-Ipv6-Address

0-1

0-1

0-1

0

0

26.6527.100

Alc-Serv-Id

0-1

0-1

0-1

0

0

26.6527.102

Alc-ToServer-Dhcp-Options

0+

0+

0+

0

0

26.6527.121

Alc-Nat-Port-Range

0+

0+

0+

0

0

26.6527.140

Alc-Nat-Outside-Serv-Id

0-1

0-1

0-1

0

0

26.6527.141

Alc-Nat-Outside-Ip-Addr

0-1

0-1

0-1

0

0

26.6527.148

Alc-RSSI

0-1

0-1

0-1

0

0

26.6527.163

Alc-Acct-Triggered-Reason

0

0

0-1

0

0

26.6527.184

Alc-Wlan-Ue-Creation-Type

0-1

0-1

0-1

0

0

26.6527.191

Alc-ToServer-Dhcp6-Options

0-1

0-1

0-1

0

0

26.6527.206

Alc-Wlan-SSID-VLAN

0-1

0-1

0-1

0

0

241.26.6527.59

Alc-Xconnect-Tunnel-Home-Ipv6

0-1

0-1

0-1

0

0

241.26.6527.63

Alc-Millisecond-Event-Timestamp

0-1

0-1

0-1

0

0

1 The attributes are included for AA-sub stats when enabled using "configure service vprn | ies service-id subscriber-interface ip-int-name group-interface ip-int-name wlan-gw vlan-tag-ranges range start [0..4096] end [0..4096] distributed-sub-mgmt collect-aa-acct-stats" and explicitly included as "configure aaa isa-radius-policy name acct-include-attributes" with "octet-counters" for octet counter and "frame-counters" for packet counters. The description and limits are detailed in Table: Application Assurance accounting (description) and Table: Application Assurance accounting (limits) in the Application Assurance (AA) Accounting section.