This section provides information to configure cflowd and examples of common configuration tasks. To sample traffic, the following parameters must be configured, as a minimum.
Cflowd must be enabled.
At least one collector must be configured and enabled.
Sampling must be enabled on either:
An IP filter entry (and applied to a service or a port)
An interface applied to a port
The following example shows a cflowd configuration:
A:ALA-1>config>cflowd# info detail
----------------------------------------------
active-flow-timeout 1800
cache-size 6553
inactive-flow-timeout 15
export-mode automatic
overflow 1
template-retransmit 600
no use-vrtr-if-index
no inband-collector-export-only
no analyze-gre-payload
no analyze-l2tp-traffic
no analyze-v4overv6-traffic
sample-profile 1 create
sample-rate 1000
exit
no shutdown
----------------------------------------------
A:ALA-1>config>cflowd