Configuring neighbor attributes

After you create a group name and assign options, add neighbors within the same autonomous system to create IBGP connections and/or neighbors in different autonomous systems to create EBGP peers. All parameters configured for the peer group level are applied to each neighbor, but a group parameter can be overridden on a specific neighbor basis.

The following example displays neighbors configured in group ‟headquarters1”.

ALA-B>config>router>bgp# info
----------------------------------------------
...
            group "headquarters1"
                description "HQ execs"
                local-address 10.0.0.104
                disable-communities standard extended
                ttl-security 255
                neighbor 10.0.0.5
                    passive
                    peer-as 300
                exit
                neighbor 10.0.0.106
                    peer-as 100
                exit
                neighbor 17.5.0.2
                    hold-time 90
                    keepalive 30
                    local-preference 170
                    peer-as 10701
                exit
                neighbor 17.5.1.2
                    hold-time 90
                    keepalive 30
                    local-preference 100
                    min-route-advertisement 30
                    preference 170
                    peer-as 10702
                exit
            exit
...
----------------------------------------------
ALA-B>config>router>bgp#