Enter the eth-ring list instance
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Ring ID
1 to 128
This element is part of a list key.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Administrative state of the Ethernet ring
configure eth-ring number admin-state keyword
disable
enable, disable
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the ccm-hold-time context
configure eth-ring number ccm-hold-time
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Hold timer for down event dampening
configure eth-ring number ccm-hold-time down number
1 to 5000
centiseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Hold timer for recovery reporting
configure eth-ring number ccm-hold-time up number
0 to 5000
20
deciseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Compatibility version for the Ethernet ring
configure eth-ring number compatible-version number
1 to 2
2
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Text description
configure eth-ring number description string
0 to 80
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Ethernet ring guard time
configure eth-ring number guard-time number
1 to 20
5
deciseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
MAC address of the RPL link
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the path list instance
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Path ID
1
This element is part of a list key.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Administrative state of the Ethernet ring path
configure eth-ring number path string admin-state keyword
disable
enable, disable
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Text description
configure eth-ring number path string description string
0 to 80
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the eth-cfm context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the mep list instance
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Admin-assigned maintenance domain index value
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number
This element is part of a list key.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Maintenance association name
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number
configure eth-cfm domain string association string
This element is part of a list key.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Maintenance endpoint ID
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number
1 to 8191
This element is part of a list key.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Administrative state of the MEP
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword
disable
enable, disable
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the alarm-notification context
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Time that must expire before an FNG alarm is raised
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number
250 | 500 | 1000
centiseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Time that must expire before an FNG alarm is reset
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number
250 | 500 | 1000
centiseconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Generate CCM messages
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Priority of CCM and LTM messages transmitted by the MEP
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number
0 to 7
7
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Number of octets of padding to insert in CCM packets
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number
This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU.
This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer Two encapsulation. CCM padding is not supported when the CCM Interval is less than one second.
3 to 1500
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enable Ethernet ring control on the MEP
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number control-mep boolean
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Text description
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string
1 to 80
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enable the eth-test context
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test
Commands in this context configure parameters used by the ETH-TST packet. The commands must be configured on both the sender and receiver nodes. The test packets are used with the oam eth-cfm eth-test command.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Lowest priority defect allowed to generate fault alarm
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number
0 to 11840
1
bit errors
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the test-pattern context
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern
Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and receiver.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Generate a CRC checksum
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Test pattern for ETH-test frames
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword
all-zeros
all-zeros, all-ones
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the grace context
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the eth-ed context
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Maximum received ETH-ED expected defect window duration
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number
1 to 86400
seconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Transmission priority for ETH-ED PDUs
0 to 7
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP
true
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Transmit ETH-ED PDUs from the MEP
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the eth-vsm-grace context
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Receive and process Nokia ETH-CFM Grace PDU on the MEP
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean
true
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Transmit ETH-ED PDUs from the MEP
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean
true
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Lowest priority defect allowed to generate fault alarm
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword
all-def
all-def, mac-rem-err-xcon, rem-err-xcon, err-xcon, xcon, no-xcon
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
MAC address of the MEP
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Threshold time limit for one-way delay test
configure eth-ring number path string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number
0 to 600
3
seconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
| Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
Port ID and Ring APS tag ID
configure eth-ring number path string port-and-raps-tag string
1 to 45
This element is mandatory.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
| Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
Enable path as a Ring Protection Link (RPL) end
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Revert time for the Ethernet ring
configure eth-ring number revert-time number
0 | 60 to 720
300
seconds
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Ring Protection Link (RPL) type for the Ethernet ring
owner, neighbor
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the sub-ring context
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Enter the interconnect context
configure eth-ring number sub-ring interconnect
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Propagate topology changes
configure eth-ring number sub-ring interconnect propagate-topology-change boolean
false
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Ring instance of the connection ring for the sub-ring
configure eth-ring number sub-ring interconnect ring-id reference
The following elements are part of a choice: ring-id or vpls.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Connect sub-ring to VPLS ID that contains sub-ring SAP
configure eth-ring number sub-ring interconnect vpls
The following elements are part of a choice: ring-id or vpls.
21.7.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS