Enter the lawful intercept configuration context
19.10.R1
All
Enter the li-filter context
19.10.R1
All
Enter the associations context
19.10.R1
All
Enter the li-ip-filter list instance
li li-filter associations li-ip-filter reference
19.10.R1
All
Name of an existing LI IP filter
li li-filter associations li-ip-filter reference
li li-filter li-ip-filter string
This element is part of a list key.
19.10.R1
All
Add a list entry for ip-filter
li li-filter associations li-ip-filter reference ip-filter string
1
1
19.10.R1
All
IP filter to be associated with specified LI IP filter
li li-filter associations li-ip-filter reference ip-filter string
1 to 64
This element is part of a list key.
19.10.R1
All
Enter the li-ipv6-filter list instance
li li-filter associations li-ipv6-filter reference
19.10.R1
All
LI IPv6 filter name
li li-filter associations li-ipv6-filter reference
li li-filter li-ipv6-filter string
This element is part of a list key.
19.10.R1
All
Add a list entry for ipv6-filter
li li-filter associations li-ipv6-filter reference ipv6-filter string
1
1
19.10.R1
All
IP filter to be associated with specified LI IP filter
li li-filter associations li-ipv6-filter reference ipv6-filter string
1 to 64
This element is part of a list key.
19.10.R1
All
Enter the li-mac-filter list instance
li li-filter associations li-mac-filter reference
19.10.R1
All
LI MAC filter name
li li-filter associations li-mac-filter reference
li li-filter li-mac-filter string
This element is part of a list key.
19.10.R1
All
Add a list entry for mac-filter
li li-filter associations li-mac-filter reference mac-filter string
1
1
19.10.R1
All
IP filter to be associated with specified LI IP filter
li li-filter associations li-mac-filter reference mac-filter string
1 to 64
This element is part of a list key.
19.10.R1
All
Enter the li-ip-filter list instance
li li-filter li-ip-filter string
Commands in this context create LI IPv4 filter lists, which can be used to create confidential IPv4 filter based LI source entries.
The LI IPv4 filter entries are merged into normal IPv4 filters configured with the li li-filter associations and li li-filter reserved-block commands. The LI IPv4 filter entries are visible only to users with LI permissions.
19.10.R1
All
LI filter name
li li-filter li-ip-filter string
This command specifies the LI filter name. Filter names cannot start with an underscore character (for example, “_my-filter”) and cannot use the name “default”.
1 to 32
This element is part of a list key.
19.10.R1
All
Text description
li li-filter li-ip-filter string description string
1 to 80
19.10.R1
All
Enter the entry list instance
li li-filter li-ip-filter string entry number
Commands in this context configure an entry for the LI filter.
Multiple entries can be created using unique entry ID numbers within the filter. An entry in an LI filter always has an implicit action of “forward”. LI filter entries can be used as LI source entries.
The entry numbers for LI filters serve only as keys for managing the entries (deleting entries, and so on). The order of the LI filter entries is not guaranteed to match the entry numbers and the software may reorder entries. Operators must therefore use LI entries in such a way that their relative order is not important.
Entries removed from the filter are immediately removed from all services or network ports where the associated filter is applied.
19.10.R1
All
LI filter entry ID
li li-filter li-ip-filter string entry number
1 to 65535
This element is part of a list key.
19.10.R1
All
Text description
li li-filter li-ip-filter string entry number description string
1 to 80
19.10.R1
All
Enter the match context
li li-filter li-ip-filter string entry number match
Commands in this context configure match criteria for the filter entry. If more than one match criteria (within one match statement) are configured, all criteria must be satisfied (and function) for a match to occur.
A match context may consist of multiple match criteria, but multiple match statements cannot be configured per entry.
19.10.R1
All
Enter the dst-ip context
19.10.R1
All
IP address to match
19.10.R1
All
Mask that is applied as an AND to the IP address
19.10.R1
All
Enter the dst-port context
19.10.R1
All
Condition on equality to specified value
0 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being greater than the specified value
0 to 65534
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being less than the specified value
1 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Enable the range context
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Upper bound port to match
1 to 65535
This element is mandatory.
19.10.R1
All
Lower bound port to match
0 to 65534
This element is mandatory.
19.10.R1
All
Fragmentation state as the match criterion
false, true
20.2.R1
All
IP protocol to match
0 to 255
tcp-udp, icmp, igmp, ip, tcp, egp, igp, udp, rdp, ipv6, ipv6-route, ipv6-frag, idrp, rsvp, gre, ipv6-icmp, ipv6-no-nxt, ipv6-opts, iso-ip, eigrp, ospf-igp, ether-ip, encap, pnni, pim, vrrp, l2tp, stp, ptp, isis, crtp, crudp, sctp
19.10.R1
All
Enter the src-ip context
19.10.R1
All
IP address to match
19.10.R1
All
Mask that is applied as an AND to the IP address
19.10.R1
All
Enter the src-port context
19.10.R1
All
Condition on equality to specified value
0 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being greater than the specified value
0 to 65534
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being less than the specified value
1 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Enable the range context
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Upper bound port to match
1 to 65535
This element is mandatory.
19.10.R1
All
Lower bound port to match
0 to 65534
This element is mandatory.
19.10.R1
All
Enter the li-ipv6-filter list instance
li li-filter li-ipv6-filter string
Commands in this context create LI IPv6 filter lists, which can be used to create confidential IPv6 filter based LI source entries.
The LI IPv6 filter entries are merged into normal IPv6 filters configured with the li li-filter associations and li li-filter reserved-block commands. However, the LI IPv6 filter entries are visible only to users with LI permissions.
19.10.R1
All
LI filter name
li li-filter li-ipv6-filter string
This command specifies the LI filter name. Filter names cannot start with an underscore character (for example, “_my-filter”) and cannot use the name “default”.
1 to 32
This element is part of a list key.
19.10.R1
All
Text description
li li-filter li-ipv6-filter string description string
1 to 80
19.10.R1
All
Enter the entry list instance
li li-filter li-ipv6-filter string entry number
Commands in this context configure an entry for the LI filter.
Multiple entries can be created using unique entry ID numbers within the filter. An entry in an LI filter always has an implicit action of “forward”. LI filter entries can be used as LI source entries.
The entry numbers for LI filters serve only as keys for managing the entries (deleting entries, and so on). The order of the LI filter entries is not guaranteed to match the entry numbers and the software may reorder entries. Operators must therefore use LI entries in such a way that their relative order is not important.
Entries removed from the filter are immediately removed from all services or network ports where the associated filter is applied.
19.10.R1
All
LI filter entry ID
li li-filter li-ipv6-filter string entry number
1 to 65535
This element is part of a list key.
19.10.R1
All
Text description
li li-filter li-ipv6-filter string entry number description string
1 to 80
19.10.R1
All
Enter the match context
li li-filter li-ipv6-filter string entry number match
Commands in this context configure match criteria for the filter entry. If more than one match criteria (within one match statement) are configured, all criteria must be satisfied (and function) for a match to occur.
A match context may consist of multiple match criteria, but multiple match statements cannot be configured per entry.
19.10.R1
All
Enter the dst-ip context
19.10.R1
All
IP address to match
19.10.R1
All
Mask that is applied as an AND to the IPv6 address
19.10.R1
All
Enter the dst-port context
19.10.R1
All
Condition on equality to specified value
0 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being greater than the specified value
0 to 65534
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being less than the specified value
1 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Enable the range context
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Upper bound port to match
1 to 65535
This element is mandatory.
19.10.R1
All
Lower bound port to match
0 to 65534
This element is mandatory.
19.10.R1
All
IP protocol to match
li li-filter li-ipv6-filter string entry number match next-header (number | keyword)
0 to 255
tcp-udp, icmp, igmp, ip, tcp, egp, igp, udp, rdp, ipv6, ipv6-route, ipv6-frag, idrp, rsvp, gre, ipv6-icmp, ipv6-no-nxt, ipv6-opts, iso-ip, eigrp, ospf-igp, ether-ip, encap, pnni, pim, vrrp, l2tp, stp, ptp, isis, crtp, crudp, sctp
19.10.R1
All
Enter the src-ip context
19.10.R1
All
IP address to match
19.10.R1
All
Mask that is applied as an AND to the IPv6 address
19.10.R1
All
Enter the src-port context
19.10.R1
All
Condition on equality to specified value
0 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being greater than the specified value
0 to 65534
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Condition on being less than the specified value
1 to 65535
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Enable the range context
The following elements are part of a choice: eq, gt, lt, or range.
19.10.R1
All
Upper bound port to match
1 to 65535
This element is mandatory.
19.10.R1
All
Lower bound port to match
0 to 65534
This element is mandatory.
19.10.R1
All
Enter the li-mac-filter list instance
li li-filter li-mac-filter string
Commands in this context configure LI MAC filter lists, which can be used to create confidential MAC filter based LI source entries.
The LI MAC filter entries are merged into normal MAC filters as configured using the li-filter associations and li-filter reserved-block commands. The LI MAC filter entries are visible only to users with LI permissions.
19.10.R1
All
LI filter name
li li-filter li-mac-filter string
This command specifies the LI filter name. Filter names cannot start with an underscore character (for example, “_my-filter”) and cannot use the name “default”.
1 to 32
This element is part of a list key.
19.10.R1
All
Text description
li li-filter li-mac-filter string description string
1 to 80
19.10.R1
All
Enter the entry list instance
li li-filter li-mac-filter string entry number
Commands in this context configure an entry for the LI filter.
Multiple entries can be created using unique entry ID numbers within the filter. An entry in an LI filter always has an implicit action of “forward”. LI filter entries can be used as LI source entries.
The entry numbers for LI filters serve only as keys for managing the entries (deleting entries, and so on). The order of the LI filter entries is not guaranteed to match the entry numbers and the software may reorder entries. Operators must therefore use LI entries in such a way that their relative order is not important.
Entries removed from the filter are immediately removed from all services or network ports where the associated filter is applied.
19.10.R1
All
LI filter entry ID
li li-filter li-mac-filter string entry number
1 to 65535
This element is part of a list key.
19.10.R1
All
Text description
li li-filter li-mac-filter string entry number description string
1 to 80
19.10.R1
All
Enter the match context
li li-filter li-mac-filter string entry number match
Commands in this context configure match criteria for the filter entry. If more than one match criteria (within one match statement) are configured, all criteria must be satisfied (and function) for a match to occur.
A match context may consist of multiple match criteria, but multiple match statements cannot be configured per entry.
19.10.R1
All
Enable the dst-mac context
19.10.R1
All
MAC address for filter match
This element is mandatory.
19.10.R1
All
MAC address mask for filter match
ff:ff:ff:ff:ff:ff
19.10.R1
All
Frame type for MAC filter match
li li-filter li-mac-filter string entry number match frame-type keyword
This command specifies the frame type for MAC filter entry matching. A filter can be edited even if an LI source references an entry in the filter.
802dot3
802dot3, 802dot2-llc, 802dot2-snap, ethernet-ii
19.10.R1
All
Enable the src-mac context
19.10.R1
All
MAC address for filter match
This element is mandatory.
19.10.R1
All
MAC address mask for filter match
ff:ff:ff:ff:ff:ff
19.10.R1
All
Lock state of LI filters
li li-filter lock-filter keyword
lock
lock, unlock
19.10.R1
All
Enter the reserved-block list instance
li li-filter reserved-block string
8
19.10.R1
All
Object uniquely identifying an LI reserved block
li li-filter reserved-block string
1 to 32
This element is part of a list key.
19.10.R1
All
Text description
li li-filter reserved-block string description string
1 to 80
19.10.R1
All
Enable the entry-range context
li li-filter reserved-block string entry-range
19.10.R1
All
Upper bound of the range
li li-filter reserved-block string entry-range end number
1 to 2097151
This element is mandatory.
19.10.R1
All
Lower bound of the range
li li-filter reserved-block string entry-range start number
1 to 2097151
This element is mandatory.
19.10.R1
All
Add a list entry for ip-filter
li li-filter reserved-block string ip-filter string
19.10.R1
All
IP filter ID for LI filter reserved block
li li-filter reserved-block string ip-filter string
1 to 64
This element is part of a list key.
19.10.R1
All
Add a list entry for ipv6-filter
li li-filter reserved-block string ipv6-filter string
19.10.R1
All
IP filter ID for LI filter reserved block
li li-filter reserved-block string ipv6-filter string
1 to 64
This element is part of a list key.
19.10.R1
All
Add a list entry for mac-filter
li li-filter reserved-block string mac-filter string
19.10.R1
All
IP filter ID for LI filter reserved block
li li-filter reserved-block string mac-filter string
1 to 64
This element is part of a list key.
19.10.R1
All
Enter the li-source list instance
19.10.R1
All
Administrative service name
1 to 64
This element is part of a list key.
19.10.R1
All
Enable/disable mirror service.
li li-source string admin-state keyword
enable
enable, disable
19.10.R1
All
Enter the li-ip-filter list instance
li li-source string li-ip-filter reference
19.10.R1
All
A unique ID for an li-ip-filter
li li-source string li-ip-filter reference
li li-filter li-ip-filter string
This element is part of a list key.
19.10.R1
All
Enter the entry list instance
li li-source string li-ip-filter reference entry reference
1
19.10.R1
All
A unique ID for an li-ip-filter entry
li li-source string li-ip-filter reference entry reference
li li-filter li-ip-filter string entry number
This element is part of a list key.
19.10.R1
All
The intercept id of the traffic flow
li li-source string li-ip-filter reference entry reference intercept-id number
1 to 1073741823
19.10.R1
All
The session id of the traffic flow
li li-source string li-ip-filter reference entry reference session-id number
1 to 4294967295
19.10.R1
All
Enter the li-ipv6-filter list instance
li li-source string li-ipv6-filter reference
19.10.R1
All
A unique ID for an li-ipv6-filter
li li-source string li-ipv6-filter reference
li li-filter li-ipv6-filter string
This element is part of a list key.
19.10.R1
All
Enter the entry list instance
li li-source string li-ipv6-filter reference entry reference
1
19.10.R1
All
A unique ID for an li-ipv6-filter entry
li li-source string li-ipv6-filter reference entry reference
li li-filter li-ipv6-filter string entry number
This element is part of a list key.
19.10.R1
All
The intercept id of the traffic flow
li li-source string li-ipv6-filter reference entry reference intercept-id number
1 to 1073741823
19.10.R1
All
The session id of the traffic flow
li li-source string li-ipv6-filter reference entry reference session-id number
1 to 4294967295
19.10.R1
All
Enter the li-mac-filter list instance
li li-source string li-mac-filter reference
19.10.R1
All
A unique ID for an li-mac-filter
li li-source string li-mac-filter reference
li li-filter li-mac-filter string
This element is part of a list key.
19.10.R1
All
Enter the entry list instance
li li-source string li-mac-filter reference entry reference
1
19.10.R1
All
A unique ID for an li-mac-filter entry
li li-source string li-mac-filter reference entry reference
li li-filter li-mac-filter string entry number
This element is part of a list key.
19.10.R1
All
The intercept id of the traffic flow
li li-source string li-mac-filter reference entry reference intercept-id number
1 to 1073741823
19.10.R1
All
The session id of the traffic flow
li li-source string li-mac-filter reference entry reference session-id number
1 to 4294967295
19.10.R1
All
Enter the nat context
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the dslite list instance
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Name of the service
1 to 64
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
B4 prefix of the subscriber
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The intercept id of the traffic flow
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The session id of the traffic flow
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the ethernet-header context
li li-source string nat ethernet-header
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Destination MAC address field of Ethernet encapsulation
li li-source string nat ethernet-header destination-address string
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Source MAC address field of the Ethernet encapsulation
li li-source string nat ethernet-header source-address string
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Ethertype of the ethernet encapsulation
li li-source string nat ethernet-header type number
1536 to 65535
1792
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the l2-aware list instance
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The string identifying the subscribe
1 to 64
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The intercept id of the traffic flow
li li-source string nat l2-aware string intercept-id number
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The session id of the traffic flow
li li-source string nat l2-aware string session-id number
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the nat44 list instance
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Name of the service
1 to 64
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
IP address of the subscriber
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The intercept id of the traffic flow
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The session id of the traffic flow
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the nat64 list instance
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Name of the service
1 to 64
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
IP prefix of the subscriber
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The intercept id of the traffic flow
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
The session id of the traffic flow
1 to 4294967295
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the port list instance
20.5.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Port ID
This element is part of a list key.
20.5.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Perform lawful intercept on egress traffic
false
20.5.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Perform lawful intercept on ingress traffic
false
20.5.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
SAP ID
1 to 45
This element is part of a list key.
19.10.R1
All
Perform lawful intercept on egress traffic
false
19.10.R1
All
Perform lawful intercept on ingress traffic
false
19.10.R1
All
The intercept id of the traffic flow
li li-source string sap string intercept-id number
1 to 1073741823
19.10.R1
All
The session id of the traffic flow
li li-source string sap string session-id number
1 to 4294967295
19.10.R1
All
Enter the subscriber list instance
li li-source string subscriber string
19.10.R1
All
The string identifying the subscriber
li li-source string subscriber string
1 to 64
This element is part of a list key.
19.10.R1
All
Perform lawful intercept on egress traffic
li li-source string subscriber string egress boolean
false
19.10.R1
All
The forwarding classes traffic which should be mirrored
li li-source string subscriber string fc keyword
be, l2, af, l1, h2, ef, h1, nc
8
19.10.R1
All
The type of subscriber host to be monitored
li li-source string subscriber string host-type keyword
ipoe, ppp
19.10.R1
All
Perform lawful intercept on ingress traffic
li li-source string subscriber string ingress boolean
false
19.10.R1
All
The intercept id of the traffic flow
li li-source string subscriber string intercept-id number
1 to 1073741823
19.10.R1
All
IP address of the subscriber
li li-source string subscriber string ip-address string
The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
19.10.R1
All
The family of IP flows to be monitored for an IPoE type of host
li li-source string subscriber string ip-family keyword
ipv4, ipv6
19.10.R1
All
The source MAC address
li li-source string subscriber string mac-address string
The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
19.10.R1
All
SAP identifier.
li li-source string subscriber string sap-id string
1 to 45
The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
19.10.R1
All
The session id of the traffic flow
li li-source string subscriber string session-id number
1 to 4294967295
19.10.R1
All
SLA profile
li li-source string subscriber string sla-profile string
1 to 32
The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
19.10.R1
All
Enter the wlan-gw-dsm-ue list instance
li li-source string wlan-gw-dsm-ue string
19.10.R1
All
MAC address of the DSM UE
li li-source string wlan-gw-dsm-ue string
This element is part of a list key.
19.10.R1
All
Intercept identifier
li li-source string wlan-gw-dsm-ue string intercept-id number
1 to 4294967295
19.10.R1
All
Session identifier
li li-source string wlan-gw-dsm-ue string session-id number
1 to 4294967295
19.10.R1
All
Enter the log-id list instance
30
19.10.R1
All
Log ID
1 to 64
This element is part of a list key.
21.2.R1
All
The administrative state of the log
li log log-id string admin-state keyword
enable
enable, disable
19.10.R1
All
Text description
li log log-id string description string
1 to 80
19.10.R1
All
Enter the destination context
li log log-id string destination
19.10.R1
All
Enable the memory context
li log log-id string destination memory
The following elements are part of a choice: memory, netconf, or snmp.
19.10.R1
All
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
Number of events stored in this memory log
li log log-id string destination memory max-entries number
50 to 1024
100
19.10.R1
All
Enable the netconf context
li log log-id string destination netconf
The following elements are part of a choice: memory, netconf, or snmp.
20.2.R1
All
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
Maximum number of events stored in the NETCONF log
li log log-id string destination netconf max-entries number
This command configures the maximum number of events stored in the NETCONF log.
If this setting needs to be modified, the log ID must be removed and re-created.
50 to 1024
100
20.2.R1
All
Enable the snmp context
li log log-id string destination snmp
The following elements are part of a choice: memory, netconf, or snmp.
19.10.R1
All
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
Number of events stored in this snmp log
li log log-id string destination snmp max-entries number
50 to 1024
100
19.10.R1
All
Event filter ID to associate with log ID configuration
1 to 64
19.10.R1
All
Destination NETCONF stream name
li log log-id string netconf-stream string
1 to 32
20.2.R1
All
Enter the source context
19.10.R1
All
The 'li' event stream contains all events configured for LI activities
false
19.10.R1
All
Time zone to display date and time
li log log-id string time-format keyword
utc
utc, local
19.10.R1
All
Enter the mirror-dest-reservation context
19.10.R1
All
Last service id
li mirror-dest-reservation end number
1 to 2147483647
19.10.R1
All
First service id
li mirror-dest-reservation start number
1 to 2147483647
19.10.R1
All
Enter the mirror-dest-template list instance
li mirror-dest-template string
8
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Mirror destination template name
li mirror-dest-template string
1 to 32
This element is part of a list key.
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the layer-3-encap context
li mirror-dest-template string layer-3-encap
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
If the highest bit in the Interception ID field of the shim header is used to indicate the direction of the mirrored traffic flow.
li mirror-dest-template string layer-3-encap direction-bit boolean
false
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
The header type of the layer 3 encapsulation.
li mirror-dest-template string layer-3-encap encap-type keyword
ip-udp-shim
ip-udp-shim, ip-gre
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Source IPv4 address to be used in the layer-3 encapsulation
li mirror-dest-template string layer-3-encap ip-source string
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Specifies a virtual router instance as a string (unlike vrtr-id).
li mirror-dest-template string layer-3-encap router-instance string
1 to 64
Base
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the udp context
li mirror-dest-template string layer-3-encap udp
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Destination UDP port
li mirror-dest-template string layer-3-encap udp destination number
1 to 65535
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Source UDP port
li mirror-dest-template string layer-3-encap udp source number
1 to 65535
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
Configure mirror type information.
li mirror-dest-template string type keyword
ether
ether, ip-only
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the nat context
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
For Layer-2-Aware NAT subscribers, report their outside IP address.
li nat use-outside-ip-address boolean
false
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the radius context
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
mirror destination template for use with Radius
li radius mirror-dest-template reference
li mirror-dest-template string
19.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the x-interfaces context
21.5.R1
7750 SR-7/12/12e
Administrative state of the x-interfaces
li x-interfaces admin-state keyword
disable
enable, disable
21.5.R1
7750 SR-7/12/12e
Enter the correlation-id context
21.5.R1
7750 SR-7/12/12e
Specifies the RADIUS accounting ID type used for the correlation identifier.
li x-interfaces correlation-id ipoe keyword
radius-host-acct-id
radius-host-acct-id, radius-queue-acct-id, radius-session-acct-id
21.5.R1
7750 SR-7/12/12e
Specifies the RADIUS accounting ID type used for the correlation identifier.
li x-interfaces correlation-id pppoe keyword
radius-host-acct-id
radius-host-acct-id, radius-queue-acct-id, radius-session-acct-id
21.5.R1
7750 SR-7/12/12e
Specifies the Intercepting Network Element (INE) identifier of this system.
li x-interfaces ine-identifier string
1 to 32
21.5.R1
7750 SR-7/12/12e
Enter the lic list instance
li x-interfaces lic string
18
21.5.R1
7750 SR-7/12/12e
The name of the Lawful Intercept Center.
li x-interfaces lic string
1 to 32
This element is part of a list key.
21.5.R1
7750 SR-7/12/12e
Enter the authentication context
li x-interfaces lic string authentication
21.5.R1
7750 SR-7/12/12e
Specifies the password used for authentication of the LIC and the INE on the X1 and X2 interface.
li x-interfaces lic string authentication password string
1 to 32
21.5.R1
7750 SR-7/12/12e
Specifies the private Ki string used for authentication of the LIC and the INE on the X1 and X2 interface.
li x-interfaces lic string authentication private-ki string
1 to 32
21.5.R1
7750 SR-7/12/12e
Specifies the sequence group used for authentication of the LIC and the INE on the X1 and X2 interface. A value of zero means that there is no sequence group specified
li x-interfaces lic string authentication sequence-group number
2 to 4294967295
21.5.R1
7750 SR-7/12/12e
Text description.
li x-interfaces lic string description string
1 to 80
21.5.R1
7750 SR-7/12/12e
Specifies the LIC-identifier - to be used to transmit protocol messages from this BNG to the LIC.
li x-interfaces lic string identifier string
1 to 32
21.5.R1
7750 SR-7/12/12e
Enter the ipv4 context
li x-interfaces lic string ipv4
21.5.R1
7750 SR-7/12/12e
Specifies the IP address of this LIC. It is the address this system will use as destination IP address when sending IP datagrams to this LIC.
li x-interfaces lic string ipv4 ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
21.5.R1
7750 SR-7/12/12e
Specifies the TCP port number associated with this LIC.
If this LIC is used for the X1 interface, it is the TCP port this system expects as source port in TCP segments received from this LIC.
li x-interfaces lic string port number
0 to 65535
21.5.R1
7750 SR-7/12/12e
Specifies a virtual router instance as a string (unlike vrtr-id).
li x-interfaces lic string router-instance string
0 to 64
21.5.R1
7750 SR-7/12/12e
Specifies the local user database used to authenticate data-trigger hosts which are considered static IP hosts by the LIC.
li x-interfaces user-db string
1 to 32
21.5.R1
7750 SR-7/12/12e
Enter the x1 context
21.5.R1
7750 SR-7/12/12e
Enter the ipv4 context
21.5.R1
7750 SR-7/12/12e
Specifies the local IP address used for X1 interface communication.
li x-interfaces x1 ipv4 local-address (ipv4-address-no-zone | ipv6-address-no-zone)
21.5.R1
7750 SR-7/12/12e
Specifies the peer LIC for the X1 interface.
li x-interfaces x1 lic-peer reference
li x-interfaces lic string
21.5.R1
7750 SR-7/12/12e
Specifies the local TCP port explicitly used for X1 communication.
li x-interfaces x1 local-tcp-port number
1 to 65535
21.5.R1
7750 SR-7/12/12e
Enter the timeouts context
21.5.R1
7750 SR-7/12/12e
Specifies the value of the Tx1-nomsg timer. If this system does not receive any X1 messages from its peer during this time, it will initiate the release of the connection.
li x-interfaces x1 timeouts message-timeout number
180 to 300
180
seconds
21.5.R1
7750 SR-7/12/12e
Enter the x2 context
21.5.R1
7750 SR-7/12/12e
Enter the ipv4 context
21.5.R1
7750 SR-7/12/12e
Specifies the local IP address used for X2 interface communication.
li x-interfaces x2 ipv4 local-address (ipv4-address-no-zone | ipv6-address-no-zone)
21.5.R1
7750 SR-7/12/12e
Specifies the peer LIC for the X2 interface.
li x-interfaces x2 lic-peer reference
li x-interfaces lic string
21.5.R1
7750 SR-7/12/12e
Enter the timeouts context
21.5.R1
7750 SR-7/12/12e
Specifies the value of the Tx2-checkstate timer. After sending a 'x2CheckReq' message, if this system does not receive the 'x2CheckAck' message from its peer during this time, it will retry 2 times, before releasing the connection with this peer.
li x-interfaces x2 timeouts keep-alive number
300 to 600
300
seconds
21.5.R1
7750 SR-7/12/12e
specifies the value of the Tx2-normal timer; for this system, the Tx2-normal timer is a timeout on the 'x2ConnectionReq' message sent.
If this system does not receive the 'x2ConnectionAck' message from its peer during this time, it will retry 2 times, before considering the connection attempt failed.
li x-interfaces x2 timeouts request number
5 to 30
5
seconds
21.5.R1
7750 SR-7/12/12e
Enter the x3 context
21.5.R1
7750 SR-7/12/12e
Enter the alarms context
21.5.R1
7750 SR-7/12/12e
Enter the cpu-alarm context
21.5.R1
7750 SR-7/12/12e
Specifies high threshold value of the CPU usage alarm.
li x-interfaces x3 alarms cpu-alarm high-threshold number
1 to 100
percent
21.5.R1
7750 SR-7/12/12e
Specifies low threshold value of the CPU usage alarm.
li x-interfaces x3 alarms cpu-alarm low-threshold number
0 to 99
0
percent
21.5.R1
7750 SR-7/12/12e
Enter the memory-alarm context
21.5.R1
7750 SR-7/12/12e
Specifies high threshold value of the packet buffer memory usage alarm.
li x-interfaces x3 alarms memory-alarm high-threshold number
1 to 100
percent
21.5.R1
7750 SR-7/12/12e
Specifies low threshold value of the packet buffer memory usage alarm.
li x-interfaces x3 alarms memory-alarm low-threshold number
0 to 99
0
percent
21.5.R1
7750 SR-7/12/12e
Enter the throughput-alarm context
21.5.R1
7750 SR-7/12/12e
Specifies high threshold value of the throughput alarm.
1 to 4294967295
megabps
21.5.R1
7750 SR-7/12/12e
Specifies low threshold value of the throughput alarm.
1 to 4294967295
megabps
21.5.R1
7750 SR-7/12/12e
Enter the ipv4 context
21.5.R1
7750 SR-7/12/12e
Enter the local-address-range context
21.5.R1
7750 SR-7/12/12e
End address of this range.
li x-interfaces x3 ipv4 local-address-range end string
21.5.R1
7750 SR-7/12/12e
Start address of this range.
li x-interfaces x3 ipv4 local-address-range start string
21.5.R1
7750 SR-7/12/12e
Specifies the ISA-BB group of the X3 interface.
li x-interfaces x3 li-group number
1 to 4
21.5.R1
7750 SR-7/12/12e
Add a list entry for lic-peers
li x-interfaces x3 lic-peers reference
16
21.5.R1
7750 SR-7/12/12e
Specifies the peer LICs for the X3 interface.
li x-interfaces x3 lic-peers reference
li x-interfaces lic string
This element is part of a list key.
21.5.R1
7750 SR-7/12/12e
Specifies the maximum number of X3 sessions this system can set up.
li x-interfaces x3 session-limit number
1 to 32
32
21.5.R1
7750 SR-7/12/12e
Enter the timeouts context
21.5.R1
7750 SR-7/12/12e
Specifies the value of theTx3-checkstate timer. After sending a 'X3CheckStateReq' message, if this system does not receive the 'x3CheckAck' message from its peer during this time, it will retry 2 times, before considering the tunnel setup failed.
li x-interfaces x3 timeouts keep-alive number
300 to 600
300
seconds
21.5.R1
7750 SR-7/12/12e
specifies the value of the Tx3-normal timer; for this system, the Tx3-normal timer is a timeout on the 'X3createLicctunnelReq' message sent.
If this system does not receive the 'X3CreateLiccTunnelAck' message from its peer during this time, it will retry 2 times, before considering the tunnel setup attempt failed.
li x-interfaces x3 timeouts request number
5 to 30
5
seconds
21.5.R1
7750 SR-7/12/12e
Specifies the value of the Tx3-retry time.
After a failed tunnel setup, and as long as the associated target is active, this system waits for the duration of the Tx3-retry time before it tries again to set up the tunnel.
li x-interfaces x3 timeouts target-retry-wait number
300 to 1200
300
seconds
21.5.R1
7750 SR-7/12/12e