Enter the administrative context for system operations
16.0.R1
All
Enter the application-assurance context
Commands in this context configure Application Assurance (AA) upgrade and AA group upgrade operations.
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the group list instance
admin application-assurance group reference
Commands in this context configure the attributes of the group-specific upgrade.
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
AA group ID
admin application-assurance group reference
nokia-state state application-assurance group aa-group-id
This element is part of a list key.
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the url-list list instance
admin application-assurance group reference url-list reference
Commands in this context configure the URL list upgrade parameters.
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
AA URL list name
admin application-assurance group reference url-list reference
nokia-state state application-assurance group url-list url-list-name
This element is part of a list key.
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Upgrade the referenced URL list
admin application-assurance group reference url-list reference upgrade
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Upgrade to a new isa-aa.tim file
This command loads a new isa-aa.tim file as part of a router-independent signature upgrade. An AA ISA reboot is required for the upgrade to take effect.
21.10.R1
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Enter the clear context
19.10.R1
All
Enter the security context
19.10.R1
All
Reset the lockout timer
19.10.R1
All
Clear lockout of all users
The following elements are part of a mandatory choice: all or user.
19.10.R1
All
User to be cleared of lockout
1 to 32
The following elements are part of a mandatory choice: all or user.
19.10.R1
All
Clear the password history
19.10.R1
All
Clear password history of all users
The following elements are part of a mandatory choice: all or user.
19.10.R1
All
User to be cleared of password history information
admin clear security password-history user string
1 to 32
The following elements are part of a mandatory choice: all or user.
19.10.R1
All
Disconnect a user session
16.0.R1
All
IP address of the session to disconnect
admin disconnect address (ipv4-address-no-zone | ipv6-address-no-zone)
19.10.R1
All
Avoid operation ID allocation
admin disconnect op-table-bypass boolean
When configured to true, the system bypasses the YANG-based operations infrastructure and avoids the allocation of an operation ID. This is useful if the global operations table is full and a delete operation or admin disconnect is required.
21.5.R1
All
ID of the session to disconnect
admin disconnect session-id number
1 to 4294967295
16.0.R1
All
Type of session to disconnect
admin disconnect session-type keyword
console, bluetooth, telnet, ssh, ftp, netconf, grpc, cron-ehs
19.10.R1
All
Username to disconnect
admin disconnect username string
1 to 32
19.10.R1
All
Save script that computes deterministic NAT map entries
21.2.R1
All
Reboot CPM or force an upgrade of system boot ROMs
16.0.R1
All
Card to reboot
active, standby, upgrade
16.0.R1
All
Hold a rebooted standby CPM from coming back online
19.10.R1
7750 SR-7s, 7750 SR-14s, VSR
Reboot immediately without prompts or confirmation
16.0.R1
All
Enter the redundancy context
16.0.R1
All
Force a switchover to the standby CPM
16.0.R1
All
Switch to the standby CPM regardless of its status
19.10.R1
7950 XRS
Force the switchover to the standby CPM immediately
16.0.R1
All
Synchronize the standby CPM
20.10.R1
All
Synchronize files used in system initialization
The following elements are part of a mandatory choice: boot-environment or configuration.
20.10.R1
All
Synchronize the configuration files only
The following elements are part of a mandatory choice: boot-environment or configuration.
20.10.R1
All
Perform satellite operations
22.2.R1
All
Perform Ethernet satellite operations
admin satellite ethernet-satellite number
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Satellite ID
admin satellite ethernet-satellite number
1 to 20
This element is part of a list key.
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Initiate an administrative reboot of the chassis
admin satellite ethernet-satellite number reboot
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Reboot immediately without prompts or confirmation
admin satellite ethernet-satellite number reboot now
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Initiate a firmware image update during the reboot
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Synchronize the chassis to the boot image
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Save satellite technical support information
22.2.R1
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
URL to save technical support information
admin satellite ethernet-satellite number tech-support string
1 to 180
22.2.R1
All
Perform configuration save operations
16.0.R1
All
Location to save the configuration
16.0.R1
All
Save the BOF region configuration
The following elements are part of a choice: bof, configure, debug, or li.
20.10.R1
All
Save the configure region configuration
The following elements are part of a choice: bof, configure, debug, or li.
20.7.R2
All
Save the debug region configuration
The following elements are part of a choice: bof, configure, debug, or li.
21.5.R1
All
Save the LI region configuration
The following elements are part of a choice: bof, configure, debug, or li.
19.10.R1
All
System date and time
This command sets the system date and time. The time zone may optionally be specified. When the time zone is not specified, the system uses the configured system time zone.
This element is mandatory.
19.10.R1
All
Show the current configuration
16.0.R1
All
Absolute path or relative path from '/'
admin show configuration string
21.10.R1
All
Show the BOF region configuration
The following elements are part of a choice: bof, configure, debug, or li.
20.10.R1
All
Show the booted BOF configuration
The following elements are part of a choice: booted or cflash-id.
20.10.R1
All
Show the BOF configuration file on a compact flash
admin show configuration cflash-id string
4 to 6
The following elements are part of a choice: booted or cflash-id.
20.10.R1
All
Show the configure region configuration
The following elements are part of a choice: bof, configure, debug, or li.
20.7.R1
All
Show the debug region configuration
The following elements are part of a choice: bof, configure, debug, or li.
21.5.R1
All
Include default and unconfigured values
20.7.R1
All
Show the context from the pwc on each line
The following elements are part of a choice: flat, full-context, json, or xml.
20.7.R1
All
Show the full context on each line
The following elements are part of a choice: flat, full-context, json, or xml.
20.7.R1
All
Show the intended configuration
The following elements are part of a choice: intended or running.
20.7.R1
All
Show the output in indented JSON format
The following elements are part of a choice: flat, full-context, json, or xml.
19.10.R1
All
Show the LI region configuration
The following elements are part of a choice: bof, configure, debug, or li.
19.10.R1
All
Show the running configuration
The following elements are part of a choice: intended or running.
20.7.R1
All
Include unit types for applicable elements
20.10.R1
All
Show the output in indented XML format
The following elements are part of a choice: flat, full-context, json, or xml.
20.7.R1
All
Enable the shell and kernel commands
16.0.R4
All
Enter the system context
16.0.R6
All
Enter the license context
19.10.R1
All
Load and activate a system license
19.10.R1
All
Location of the license file to activate
1 to 256
19.10.R1
All
Activate the license immediately
19.10.R1
All
Load and validate a system license
19.10.R1
All
Location of the license file to validate
1 to 256
19.10.R1
All
Enter the management-interface context
21.5.R1
All
Enter the operations context
Commands in this context are used to manage YANG-based operations (for example, admin reboot, or ping) in model-driven interfaces.
21.5.R1
All
Stop and remove an operation
This command removes an operation and all status and data associated with it. If the operation was executing, it is stopped before removal.
21.5.R1
All
ID of the operation to remove
1 to 10000
This element is mandatory.
21.5.R1
All
Avoid operation ID allocation
When configured to true, the system bypasses the YANG-based operations infrastructure and avoids the allocation of an operation ID. This is useful if the global operations table is full and a delete operation or admin disconnect is required.
21.5.R1
All
Stop the execution of an operational command
This command stops the execution of an operational command.
An operation launched as "asynchronous" is not deleted from the system when it is stopped. Status and other data associated with the operation persist until the operation is explicitly deleted using the delete operation command or a retention timeout.
21.5.R1
All
ID of the operation to stop
1 to 10000
This element is mandatory.
21.5.R1
All
Avoid operation ID allocation
When configured to true, the system bypasses the YANG-based operations infrastructure and avoids the allocation of an operation ID. This is useful if the global operations table is full and a delete operation or admin disconnect is required.
21.5.R1
All
Enter the security context
16.0.R6
All
Enter the hash-control context
16.0.R6
All
Custom encryption
16.0.R6
All
Algorithm for custom encryption
admin system security hash-control custom-hash algorithm keyword
This command configures the algorithm for custom encryption. The encryption uses ECB mode, PKCS#7 padding, and Base64 encoding.
3des, aes128, aes192, aes256
This element is mandatory.
16.0.R6
All
Key for encryption algorithm
admin system security hash-control custom-hash key string
1 to 71
This element is mandatory.
16.0.R6
All
Remove the custom encryption
20.10.R1
All
Enter the telemetry context
19.10.R1
All
Enter the grpc context
19.10.R1
All
Cancel the gRPC dynamic telemetry subscription
19.10.R1
All
Cancel gRPC dynamic telemetry for all subscriptions
The following elements are part of a mandatory choice: all or subscription-id.
19.10.R1
All
ID of the telemetry subscription to cancel
0 to 4294967295
The following elements are part of a mandatory choice: all or subscription-id.
19.10.R1
All
Save technical support information to a file
20.10.R1
All
URL to save technical support information
admin tech-support string
1 to 180
20.10.R1
All