Provisioning SNMPv3 and LI subscribers for the BNG CUPS UPF

Prerequisites

Before you begin, review Overview of the LI implementation on the BNG UPF.

To provision SNMPv3 and LI subscribers for the BNG CUPS UPF, perform the following steps:

Procedure

  1. Create the SNMPv3 group for LI.
  2. Provision an LI administrator for the UPF with both LI access and SNMP access.
  3. Associate the SNMPv3 group created in step 1 with the LI administrator.

    See the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide, for more information about LI users and SNMPv3 setup.

  4. Provision the LI subscriber directly on the UPF, using the configure li li-source commands.

    See the 7450 ESS, 7750 SR, 7950 XRS, and VSR OAM and Diagnostics Guide for information about user plane LI management and procedures.

    See the CMG BNG CUPS Control Plane Function Guide and the 7750 SR MG and CMG CLI Reference Guide for information about the related BNG CUPS CPF configuration.

Parent topic: Lawful intercept