Use the following CLI syntax to create a VPLS management interface:
CLI syntax:
config>service>vpls# interface ip-int-name
address ip-address[/mask] [netmask]
arp-timeout seconds
description description-string
mac ieee-address
no shutdown
static-arp ip-address ieee-address
The following example shows the configuration.
A:ALA-49>config>service>vpls>interface# info detail
---------------------------------------------
no description
mac 14:31:ff:00:00:00
address 10.231.10.10/24
no arp-timeout
no shutdown
---------------------------------------------
A:ALA-49>config>service>vpls>interface#