The following parameters must be configured in order for GSMP to function:
One or more GSMP sessions
One or more ANCP policies
For basic subscriber management only, ANCP static maps
For enhanced subscriber management only, associate subscriber profiles with ANCP policies
Use the following CLI syntax to configure GSMP parameters.
CLI syntax:
config>service>vpls# gsmp
— group name [create]
— ancp
— dynamic-topology-discover
— oam
— description description-string
— hold-multiplier multiplier
— keepalive seconds
— neighbor ip-address [create]
— description v
— local-address ip-address
— priority-marking dscp dscp-name
— priority-marking prec ip-prec-value
— [no] shutdown
— [no] shutdown
— [no] shutdown
This example shows a GSMP group configuration.
A:ALA-48>config>service>vpls>gsmp# info
----------------------------------------------
group "group1" create
description "test group config"
neighbor 10.10.10.104 create
description "neighbor1 config"
local-address 10.10.10.103
no shutdown
exit
no shutdown
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls>gsmp#