The following output shows configuration examples of multi-chassis redundancy and the VPLS configuration. The configurations in the graphics depicted in Inter-domain VPLS resiliency using multi-chassis endpoints are represented in this output.
Node mapping to the following examples in this section:
PE3 = Dut-B
PE3' = Dut-C
PE1 = Dut-D
PE2 = Dut-E
PE3 Dut-B
*A:Dut-B>config>redundancy>multi-chassis# info
----------------------------------------------
peer 10.1.1.3 create
peer-name "Dut-C"
description "mcep-basic-tests"
source-address 10.1.1.2
mc-endpoint
no shutdown
bfd-enable
system-priority 50
exit
no shutdown
exit
----------------------------------------------
*A:Dut-B>config>redundancy>multi-chassis#
*A:Dut-B>config>service>vpls# info
----------------------------------------------
fdb-table-size 20000
send-flush-on-failure
stp
shutdown
exit
endpoint "mcep-t1" create
no suppress-standby-signaling
block-on-mesh-failure
mc-endpoint 1
mc-ep-peer Dut-C
exit
exit
mesh-sdp 201:1 vc-type vlan create
exit
mesh-sdp 211:1 vc-type vlan create
exit
spoke-sdp 221:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
precedence 1
exit
spoke-sdp 231:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
precedence 2
exit
no shutdown
----------------------------------------------
*A:Dut-B>config>service>vpls#
PE3' Dut-C
:Dut-C>config>redundancy>multi-chassis# info
----------------------------------------------
peer 10.1.1.2 create
peer-name "Dut-B"
description "mcep-basic-tests"
source-address 10.1.1.3
mc-endpoint
no shutdown
bfd-enable
system-priority 21
exit
no shutdown
exit
----------------------------------------------
*A:Dut-C>config>redundancy>multi-chassis#
*A:Dut-C>config>service>vpls# info
----------------------------------------------
fdb-table-size 20000
send-flush-on-failure
stp
shutdown
exit
endpoint "mcep-t1" create
no suppress-standby-signaling
block-on-mesh-failure
mc-endpoint 1
mc-ep-peer Dut-B
exit
exit
mesh-sdp 301:1 vc-type vlan create
exit
mesh-sdp 311:1 vc-type vlan create
exit
spoke-sdp 321:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
precedence 3
exit
spoke-sdp 331:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
exit
no shutdown
----------------------------------------------
*A:Dut-C>config>service>vpls#
PE1 Dut-D
*A:Dut-D>config>redundancy>multi-chassis# info
----------------------------------------------
peer 10.1.1.5 create
peer-name "Dut-E"
description "mcep-basic-tests"
source-address 10.1.1.4
mc-endpoint
no shutdown
bfd-enable
system-priority 50
passive-mode
exit
no shutdown
exit
----------------------------------------------
*A:Dut-D>config>redundancy>multi-chassis#
*A:Dut-D>config>service>vpls# info
----------------------------------------------
fdb-table-size 20000
propagate-mac-flush
stp
shutdown
exit
endpoint "mcep-t1" create
block-on-mesh-failure
mc-endpoint 1
mc-ep-peer Dut-E
exit
exit
mesh-sdp 401:1 vc-type vlan create
exit
spoke-sdp 411:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
precedence 2
exit
spoke-sdp 421:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
precedence 1
exit
mesh-sdp 431:1 vc-type vlan create
exit
no shutdown
----------------------------------------------
*A:Dut-D>config>service>vpls#
PE2 Dut-E
*A:Dut-E>config>redundancy>multi-chassis# info
----------------------------------------------
peer 10.1.1.4 create
peer-name "Dut-D"
description "mcep-basic-tests"
source-address 10.1.1.5
mc-endpoint
no shutdown
bfd-enable
system-priority 22
passive-mode
exit
no shutdown
exit
----------------------------------------------
*A:Dut-E>config>redundancy>multi-chassis#
*A:Dut-E>config>service>vpls# info
----------------------------------------------
fdb-table-size 20000
propagate-mac-flush
stp
shutdown
exit
endpoint "mcep-t1" create
block-on-mesh-failure
mc-endpoint 1
mc-ep-peer Dut-D
exit
exit
spoke-sdp 501:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
precedence 3
exit
spoke-sdp 511:1 vc-type vlan endpoint "mcep-t1" create
stp
shutdown
exit
block-on-mesh-failure
exit
mesh-sdp 521:1 vc-type vlan create
exit
mesh-sdp 531:1 vc-type vlan create
exit
no shutdown
----------------------------------------------
*A:Dut-E>config>service>vpls#