Configuring SAP subscriber management parameters

Use the following CLI syntax to configure subscriber management parameters on a VPLS service SAP on the 7450 ESS and 7750 SR. The policies and profiles that are referenced in the def-sla-profile, def-sub-profile, non-sub-traffic, and sub-ident-policy commands must already be configured in the config>subscr-mgmt context.

CLI syntax:

config>service>vpls service-id 
    — sap sap-id [split-horizon-group group-name]
        — sub-sla-mgmt
            — def-sla-profile default-sla-profile-name
            — def-sub-profile default-subscriber-profile-name
            — mac-da-hashing
            — multi-sub-sap [number-of-sub]
            — no shutdown
            — single-sub-parameters
                — non-sub-traffic sub-profile sub-profile-name sla-profile sla-profile-name [subscriber sub-ident-string]
                — profiled-traffic-only
            — sub-ident-policy sub-ident-policy-name

The following example shows a subscriber management configuration:

A:ALA-48>config>service>vpls#
----------------------------------------------
            description "Local VPLS"
            stp
                shutdown
            exit
            sap 1/2/2:0 create
                description "SAP for local service"
                sub-sla-mgmt
                    def-sla-profile "sla-profile1"
                    sub-ident-policy "SubIdent1"
                exit
            exit
            sap 1/1/5:0 create
                description "SAP for local service"
            exit
            no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls#