The show and tools dump command output can display the global and selective MAC addresses along with the MAC address limits and the number of allocated and free MAC-address FDB entries. The show output displays the system and card FDB usage, while the tools output displays the FDB per service with respect to MAC addresses and cards.
The configuration for the following output is similar to the simple example above:
the system has three line cards: 1, 2, and 5
the system has two VPLS services:
VPLS 1 is an EVPN-MPLS service with a SAP on 5/1/1:1 and uses a network interface on 5/1/5.
VPLS 2 has two SAPs on 2/1/1:2 and 2/1/2:2.
The first output shows the default where all MAC addresses are global. The second enables selective learning in the two VPLS services.