An FPE-based PW-port is associated with an internal spoke-SDP as described in PXC-based PW-port — building the cross-connect and FPE-based PW port operational state. Statistics for the number of forwarded/dropped packets/octets per direction on a PW-port are therefore maintained per this internal spoke-SDP. Octets field counts octets in customer frame (including customer’s Ethernet header with VLAN tags). The following command is used to display PW-port statistics along with the status of the internal spoke-SDP associated with the PW-Port:
*A:Dut-B# show pw-port 3 statistics
===============================================================================
Service Destination Point (Sdp Id 17000 Pw-Port 3)
===============================================================================
SDP Binding port : pxc-1.b
VC-Id : 100003 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Admin Ingress label : 262135 Admin Egress label : 262136
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
Statistics :
I. Fwd. Pkts. : 12000 I. Dro. Pkts. : 0
I. Fwd. Octs. : 720000 I. Dro. Octs. : 0
E. Fwd. Pkts. : 12000 E. Fwd. Octets : 720000
===============================================================================