Common configuration tasks

About this task

This section provides a brief overview of the tasks that must be performed to configure IES services and provides the CLI commands.

Procedure

  1. Associate an IES service with a customer ID.
  2. Associate customer ID with the service.
  3. Assign an IP address.
  4. Create a subscriber interface (for 7450 ESS and 7750 SR only and optional).
  5. Create an interface.
  6. Define SAP parameters on the interface

    • Select nodes and ports.

    • Optionally, select the following policies:

      • QoS policies other than the default (configured in the config>qos context); for 7450 ESS and 7750 SR only

      • filter policies (configured in the config>filter context)

      • accounting policy (configured in the config>log context); for 7450 ESS and 7750 SR only

  7. Enable service.
Parent topic: Configuring an IES service with CLI