Use the following CLI syntax to configure spoke SDP parameters:
config>service# vprn service-id [customer customer-id]
— spoke-sdp sdp-id
— no shutdown
— interface ip-int-name
— spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}]
— egress
— filter {ip ip-filter-id}
— vc-label egress-vc-label
— ingress
— filter {ip ip-filter-id}
— vc-label ingress-vc-label
— tos-marking-state {trusted | untrusted}
— no shutdown
Use the following CLI syntax to configure spoke SDP parameters for the 7750 SR:
— config>service# vprn service-id [customer customer-id]
— spoke-sdp sdp-id
— no shutdown
— interface ip-int-name
— spoke-sdp sdp-id:vc-id [vc-type {ether | vlan | vpls}]
— egress
— filter {ip ip-filter-id}
— vc-label egress-vc-label
— ingress
— filter {ip ip-filter-id}
— vc-label ingress-vc-label
— tos-marking-state {trusted | untrusted}
— no shutdown
The following output displays a spoke SDP configuration.
A:ALA-48>config>service>vprn# info
----------------------------------------------
...
interface "SpokeSDP" create
spoke-sdp 3:4 create
ingress
vc-label 3000
filter ip 10
exit
egress
vc-label 2000
filter ip 10
exit
exit
exit
...
spoke-sdp 3 create
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>vprn#