VPRN management

VPRN management can be enabled by configuring the appropriate management protocol within the VPRN from the vprn>management context. The following protocols can be enabled in this context:

FTP
gRPC
NETCONF
SSH
Telnet
Telnetv6

SNMP access is not controlled in the vprn>management context. See section SNMP management.

NTP and PTP access are not controlled in the vprn>management context. See NTP within a VPRN service and PTP within a VPRN service.

By default, all protocols are disabled. When one of these protocols is enabled, that VRF becomes a management VRF.

Note: An SSH server can only be enabled or disabled in VPRN. All other SSH configurations such as the SSH version, key re-exchange, SSH client/server HMAC/cipher list, and so on, are configured under the system and used globally.

All other gRPC configurations remain global under the config>system>grpc context.

All other NETCONF configurations remain global under the config>system>management-interface>netconf context.

The TLS profiles needed for gRPC can be configured under the config>system>security>tls context.