lag commands

configure 
   —  lag string 
      —  access 
         —  adapt-qos 
            —  include-egr-hash-cfg boolean
            —  mode keyword
         —  bandwidth number
         —  booking-factor number
         —  per-fp-egr-queuing boolean
         —  per-fp-ing-queuing boolean
         —  per-fp-sap-instance boolean
      —  adaptive-load-balancing 
         —  interval number
         —  tolerance number
      —  admin-state keyword
      —  apply-groups reference
      —  apply-groups-exclude reference
      —  bfd-liveness 
         —  ipv4 
            —  admin-state keyword
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  bfd-on-distributing-only boolean
            —  local-ip-address string
            —  max-admin-down-time (number | keyword)
            —  max-setup-time (number | keyword)
            —  multiplier number
            —  receive-interval number
            —  remote-ip-address string
            —  transmit-interval number
         —  ipv6 
            —  admin-state keyword
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  bfd-on-distributing-only boolean
            —  local-ip-address string
            —  max-admin-down-time (number | keyword)
            —  max-setup-time (number | keyword)
            —  multiplier number
            —  receive-interval number
            —  remote-ip-address string
            —  transmit-interval number
         —  soft-reset-extension boolean
      —  description string
      —  dynamic-cost boolean
      —  encap-type keyword
      —  eth-cfm 
         —  mep md-admin-name reference ma-admin-name reference mep-id number 
            —  admin-state keyword
            —  ais 
               —  client-meg-level number
               —  interface-support boolean
               —  interval number
               —  low-priority-defect keyword
               —  priority number
            —  alarm-notification 
               —  fng-alarm-time number
               —  fng-reset-time number
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  ccm boolean
            —  ccm-ltm-priority number
            —  ccm-padding-size number
            —  ccm-tlv-ignore keyword
            —  collect-lmm-stats boolean
            —  csf 
               —  multiplier decimal-number
            —  description string
            —  eth-test 
               —  bit-error-threshold number
               —  test-pattern 
                  —  crc-tlv boolean
                  —  pattern keyword
            —  facility-fault boolean
            —  grace 
               —  eth-ed 
                  —  max-rx-defect-window number
                  —  priority number
                  —  rx-eth-ed boolean
                  —  tx-eth-ed boolean
               —  eth-vsm-grace 
                  —  rx-eth-vsm-grace boolean
                  —  tx-eth-vsm-grace boolean
            —  low-priority-defect keyword
            —  mac-address string
            —  one-way-delay-threshold number
            —  vlan (number | keyword)
      —  hash-weight-threshold 
         —  action keyword
         —  cost number
         —  value number
      —  hold-time-down number
      —  lacp 
         —  administrative-key number
         —  mode keyword
         —  system-id string
         —  system-priority number
      —  lacp-mux-control keyword
      —  lacp-xmit-interval keyword
      —  lacp-xmit-stdby boolean
      —  link-map-profile number 
         —  apply-groups reference
         —  apply-groups-exclude reference
         —  description string
         —  failure-mode keyword
         —  link reference 
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  port-type keyword
      —  mac-address string
      —  max-ports number
      —  mode keyword
      —  monitor-oper-group reference
      —  per-link-hash 
         —  weighted 
            —  auto-rebalance boolean
      —  port reference 
         —  apply-groups reference
         —  apply-groups-exclude reference
         —  hash-weight (number | keyword)
         —  priority number
         —  sub-group (number | keyword)
      —  port-threshold 
         —  action keyword
         —  cost number
         —  value number
      —  port-type keyword
      —  port-weight-speed number
      —  selection-criteria 
         —  mode keyword
         —  slave-to-partner boolean
         —  subgroup-hold-time (number | keyword)
      —  standby-signaling keyword
      —  weight-threshold 
         —  action keyword
         —  cost number
         —  value number