Existing service egress or ingress policy can be copied, renamed with a new policy ID value, or overwrite an existing policy ID. The overwrite option must be specified or an error occurs if the destination policy ID exists.
CLI syntax:
config>qos# copy {sap-ingress | sap-egress} source-policy-id dest-policy-id [overwrite]
The following output displays the copied policies:
A:ALA-7>config>qos# info
---------------------------------------------
...
exit
sap-ingress 100 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
...
sap-ingress 101 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
sap-ingress 200 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
...
---------------------------------------------
A:ALA-7>config>qos#