Table: Accounting terminate causes specifies the different Terminate Causes generated by the SR OS in [49] Acct-Terminate-Cause attribute. An overview of different Enhanced Subscriber Management (ESM) Error Codes and their mapping to the Accounting Terminate Cause can be shown with the CLI command: tools dump aaa radius-acct-terminate-cause.
| Code | Acct Terminate Cause | Description | SR OS |
|---|---|---|---|
|
1 |
User-Request |
User requested termination of service, example, with LCP Terminate or by logging out. |
✓ |
|
2 |
Lost-Carrier |
Data Carrier Detect (DCD) was dropped on the port |
✓ |
|
3 |
Lost-Service |
Service can no longer be provided; example, user's connection to a host was interrupted. |
✓ |
|
4 |
Idle-Timeout |
Idle timer expired |
✓ |
|
5 |
Session-Timeout |
Maximum session length timer expired |
✓ |
|
6 |
Admin-Reset |
Administrator reset the port or session |
✓ |
|
7 |
Admin-Reboot |
Administrator is ending service on the NAS, example, before rebooting the NAS. |
|
|
8 |
Port-Error |
NAS detected an error on the port which required ending the session |
✓ |
|
9 |
NAS-Error |
NAS detected some error (other than on the port) which required ending the session |
✓ |
|
10 |
NAS-Request |
NAS ended session for a non-error reason not otherwise listed here. |
✓ |
|
11 |
NAS-Reboot |
The NAS ended the session to reboot non-administratively (crash). |
✓ |
|
12 |
Port-Unneeded |
NAS ended session because resource usage fell below low-water mark (example, if a bandwidth-on-demand algorithm decided that the port was no longer needed). |
|
|
13 |
Port-Preempted |
NAS ended session to allocate the port to a higher priority use |
|
|
14 |
Port-Suspended |
NAS ended session to suspend a virtual session |
✓ |
|
15 |
Service-Unavailable |
NAS was unable to provide requested service |
✓ |
|
16 |
Callback |
NAS is terminating current session to perform callback for a new session |
|
|
17 |
User-Error |
Input from user is in error, causing termination of session. |
|
|
18 |
Host-Request |
Login Host terminated session normally |
✓ |
|
19 |
Supplicant Restart |
Indicates re-initialization of the Supplicant state machines (dot1x) |
|
|
20 |
Reauthentication Failure |
Indicates that a previously authenticated Supplicant has failed to re-authenticate successfully following expiry of the re-authentication timer or explicit re-authentication request by management action. (dot1x) |
|
|
21 |
Port Reinitialized |
Termination cause indicates that the Port's MAC has been reinitialized (dot1x) |
|
|
22 |
Port Administratively Disabled |
Indicates that the Port has been administratively disabled (dot1x) |
|
|
23 |
Lost Power |
— |