| Attribute ID | Attribute name | Description |
|---|---|---|
|
8 |
Framed-IP-Address |
The IPv4 address to be configured for the host using DHCPv4 (radius proxy), IPCP (PPPoE) or data-triggered subscriber management. Simultaneous returned attributes [88] Framed-Pool and [8] Framed-IP-Address (RADIUS Access-Accept) are handled as host setup failures. This attribute is also used in CoA and Disconnect Message (part of the ESM or AA user identification-key). This attribute is omitted in accounting using configure subscriber-mgmt radius-accounting-policy name include-radius-attribute no framed-ip-addr. |
|
87 |
NAS-Port-Id |
A text string which identifies the physical port of the NAS (SAP ID) where the host is created. |
|
26.6527.14 |
Alc-Force-Renew |
An individual DHCPv4 session is renewed with a CoA with attribute [26.6527.14] Alc-Force-Renew. The NAS initiates the ForceRenew procedure with re-authentication (triggers dhcp Force Renew to client and start re-authentication on dhcp Request received). |
|
26.6527.15 |
Alc-Create-Host |
Used to create an IPv4 host using CoA. Additional mandatory attributes to create such a host are [8] Framed-IP-Address, [87] NAS-Port-Id and [26.6527.27] Alc-Client-Hardware-Addr |
|
26.6527.27 |
Alc-Client-Hardware-Addr |
MAC address from a user that requests a service and included in CoA, Authentication or Accounting (configure subscriber-mgmt authentication-policy/radius-accounting-policy name include-radius-attribute mac-address) |
|
26.6527.98 |
Alc-Force-Nak |
An individual DHCPv4 session is terminated with a CoA with attribute [26.6527.98] Alc-Force-Nak. The NAS initiates the ForceRenew procedure and then answers the clients DHCP request with a DHCP NAK to force the client in a rebind state. The NAS also sends a DHCP release to the DHCP server. |
| Attribute ID | Attribute name | Type | Limits | SR OS format |
|---|---|---|---|---|
|
8 |
Framed-IP-Address |
ipaddr |
4 bytes |
For example: # ip-address 10.11.12.13 Framed-IP-Address 0a0b0c0d |
|
87 |
NAS-Port-Id |
string |
253 bytes |
<slot> / <mda> / <port> [ : <qtag1> [. <qtag2>] ] For example: NAS-Port-Id = 1/1/4:501.1001 |
|
26.6527.14 |
Alc-Force-Renew |
string |
no limits |
The attribute value is ignored For example: Alc-Force-Renew = anything Alc-Force-Renew = 1 |
|
26.6527.15 |
Alc-Create-Host |
string |
no limits |
The attribute value is ignored For example: Alc-Create-Host = anything Alc-Create-Host = 1 |
|
26.6527.27 |
Alc-Client-Hardware-Addr |
string |
6 bytes |
For example: Alc-Client-Hardware-Addr = 00:00:00:00:00:01 |
|
26.6527.98 |
Alc-Force-Nak |
string |
no limits |
The attribute value is ignored For example: Alc-Force-Nak = anything Alc-Force-Nak = 1 |
| Attribute ID | Attribute name | Access Request | Access Accept | CoA request |
|---|---|---|---|---|
|
8 |
Framed-IP-Address |
0 |
0-1 |
0-1 |
|
87 |
NAS-Port-Id |
0-1 |
0 |
0-1 |
|
26.6527.14 |
Alc-Force-Renew |
0 |
0 |
0-1 |
|
26.6527.15 |
Alc-Create-Host |
0 |
0 |
0-1 |
|
26.6527.27 |
Alc-Client-Hardware-Addr |
0-1 |
0-1 |
0 |
|
26.6527.98 |
Alc-Force-Nak |
0 |
0 |
0-1 |