| Attribute ID | Attribute name | Description |
|---|---|---|
|
26.6527.17 |
Alc-Retail-Serv-Id |
The service ID of the retailer to which this subscriber host belongs. (configure service ies | vprn retail-service-id subscriber-interface retail-interface-name fwd-service wholesale-service-id fwd-subscriber-interface wholesale-interface-name). Returning an IES service ID for an IPoEv4 host is treated as a session setup failure. This attribute must be included together with NAS-Port-Id and an IP address or prefix attribute in a CoA targeting a subscriber host in a retail service. Note: [26.6527.17] Alc-Retail-Serv-Id takes precedence over
[241.26.6527.89] Alc-Retail-Serv-Name if both are
specified.
|
|
26.6527.31 |
Alc-MSAP-Serv-Id |
The service ID where Managed SAPs are created. (configure service ies/vprn service-id). If this attribute is omitted, use msap defaults created under ludb or capture VPLS. (configure subscriber-mgmt local-user-db local-user-db-name ppp/ipoe host msap-defaults service service-id or configure service vpls service-id sap sap-id msap-defaults service service-id). This omitted attribute without explicitly created msap-defaults is treated as a setup failure. Note: [26.6527.31] Alc-MSAP-Serv-Id takes precedence over
[241.26.6527.90] Alc-MSAP-Serv-Name if both are
specified.
|
|
26.6527.32 |
Alc-MSAP-Policy |
Managed sap policy-name used to create managed SAPs and refers to the CLI context configure subscriber-mgmt msap-policy msap-policy-name). The policy contains similar parameters that would be configured for a regular subscriber SAP. If this attribute is omitted, then the MSAP default configured in ludb or capture-sap is used (configure subscriber-mgmt local-user-db local-user-db ppp/ipoe host host-name msap-defaults policy msap-policy-name or configure service vpls service-id sap sap-id msap-defaults policy msap-policy-name).This omitted attribute without explicitly created MSAP defaults is treated as a setup failure. |
|
26.6527.33 |
Alc-MSAP-Interface |
The group interface name where managed SAPs are created and refers to CLI context configure service ies | vprn service-id subscriber-interface ip-int-name group-interface ip-int-name. If this attribute is omitted, the MSAP defaults configured in the ludb or capture-sap are used. (configure subscriber-mgmt local-user-db local-user-db-name ppp/ipoe host host-name msap-defaults group-interface ip-int-name or configure service vpls service-id sap sap-id msap-defaults group-interface ip-int-name). Strings above the limits and an omitted attribute without explicitly created MSAP defaults are treated as setup failures. |
|
241.26.6527.89 |
Alc-Retail-Serv-Name |
The service name of the retailer to which this subscriber host belongs. (configure service ies | vprn retail-service-id name retail-service-name subscriber-interface retail-interface-name fwd-service wholesale-service-id fwd-subscriber-interface wholesale-interface-name) . Returning an IES service name for an IPoEv4 host is treated as a session setup failure. This attribute must be included together with NAS-Port-Id and an IP address or prefix attribute in a CoA targeting a subscriber host in a retail service. When the host was setup from RADIUS using the Alc-Retail-Serv-Name, the CoA must also use the Alc-Retail-Serv-Name. Note: [26.6527.17] Alc-Retail-Serv-Id takes precedence over
[241.26.6527.89] Alc-Retail-Serv-Name if both are
specified.
|
|
241.26.6527.90 |
Alc-MSAP-Serv-Name |
The service name where Managed SAPs are created. (configure service ies | vprn service-id name retail-service-name). If this attribute is omitted, use the MSAP defaults created under ludb or capture VPLS. (configure subscriber-mgmt local-user-db local-user-db-name ppp | ipoe host msap-defaults service service-id or configure service vpls service-id sap sap-id msap-defaults service service-id). This omitted attribute without explicitly created msap-defaults is treated as a setup failure. Note: [26.6527.31] Alc-MSAP-Serv-Id takes precedence over
[241.26.6527.90] Alc-MSAP-Serv-Name if both are
specified.
|
| Attribute ID | Attribute name | Type | Limits | SR OS format |
|---|---|---|---|---|
|
26.6527.17 |
Alc-Retail-Serv-Id |
integer |
2147483647 ID |
For example: Alc-Retail-Serv-Id = 10 |
|
26.6527.31 |
Alc-MSAP-Serv-Id |
integer |
2147483647 ID |
For example: Alc-MSAP-Serv-Id = 20 |
|
26.6527.32 |
Alc-MSAP-Policy |
string |
32 chars |
Policy may start with a letter or number For example: Alc-MSAP-Policy = 1-Policy-business |
|
26.6527.33 |
Alc-MSAP-Interface |
string |
32 chars |
Interface-name must start with a letter For example: Alc-MSAP-Interface = group-1 |
|
241.26.6527.89 |
Alc-Retail-Serv-Name |
string |
64 chars |
For example: Alc-Retail-Serv-Name=Service-1 |
|
241.26.6527.90 |
Alc-MSAP-Serv-Name |
string |
64 chars |
For example: Alc-MSAP-Serv-Name=Service-1 |
| Attribute ID | Attribute name | Access Request | Access Accept | CoA request |
|---|---|---|---|---|
|
26.6527.17 |
Alc-Retail-Serv-Id |
0 |
0-1 |
0-1 |
|
26.6527.31 |
Alc-MSAP-Serv-Id |
0 |
0-1 |
0 |
|
26.6527.32 |
Alc-MSAP-Policy |
0 |
0-1 |
0 |
|
26.6527.33 |
Alc-MSAP-Interface |
0 |
0-1 |
0 |
|
241.26.6527.89 |
Alc-Retail-Serv-Name |
0 |
0-1 |
0-1 |
|
241.26.6527.90 |
Alc-MSAP-Serv-Name |
0 |
0-1 |
0 |