To create an IPoE session policy:
config
subscr-mgmt
ipoe-session-policy "ipoe-policy-1" create
description "Default IPoE session policy"
session-key sap mac # default
no session-timeout # default
exit
Enable IPoE sessions on the capture SAP and group interface.
If IPoE sessions is enabled on a capture-sap, then it must also be enabled on the target group-interface. If an IPoE session local user database lookup is configured at the capture-sap, then the same local user database lookup must be configured at the target group-interface.
config
service
vpls 10 customer 1 create
---snip---
sap 1/1/4:*.* capture-sap create
---snip---
ipoe-session
description "IPoE sessions - capture-sap"
ipoe-session-policy "ipoe-policy-1"
user-db "ludb-1"
no shutdown
exit
ies 1000 customer 1 create
subscriber-interface "sub-int-1" create
---snip---
group-interface "group-int-1-1" create
---snip---
ipoe-session
description "IPoE sessions - IES group-interface"
force-auth cid-change rid-change # default
ipoe-session-policy "ipoe-policy-1"
min-auth-interval infinite # default
sap-session-limit 1 # default
session-limit 1000
user-db "ludb-1"
no shutdown
exit
To display the IPoE session state, use following command:
# show service id <service-id> ipoe session [detail]