The following process describes how data-triggered subscriber management works with LAA for SLAAC, configured in the config>service>ies | vprn>sub-if>grp-if>lcl-addr-assign>ipv6>client-application ipoe-slaac contexts.
Data-triggered IPv6 ESM hosts are created with the prefix specified by LUDB, RADIUS, or from a source address of the data-trigger. The host creation fails if an overlapping address and prefix is found in the host table.
Data-triggered IPv6 ESM host creation fails if AAA returns a Framed-IPv6-Pool AVP with no addressing information.
Protocol-based IPv6 ESM host creation with LAA fails if LAA returns the address and prefix overlaps with an existing data-triggered ESM host.
LAA for ipoe-wan and data-triggered subscriber management cannot coexist on the same SAP. Data-triggered subscriber management, in the config>service>ies | vprn>sub-if>grp-if>data-trigger>no shutdown context, and LAA commands, in the config>service>ies | vprn>sub-if>grp-if>lcl-addr-assign>ipv6>ipoe-wan context, are mutually exclusive.