Explicit MSAP parameters from local user database

The local user database should be configured at the capture SAP and group interface context. For example:

• IPoE sessions:

  config>service>vpls>sap# ipoe-session user-db local-user-db-name

  config>service>ies>sub-if>grp-if# ipoe-session user-db local-user-db-name

• PPPoE sessions:

  config>service>vpls>sap# pppoe-user-db local-user-db-name

  config>service>ies>sub-if>grp-if>pppoe# user-db local-user-db-name

When RADIUS or DIAMETER authentication is also required after local user database authentication, then the authentication policy must be specified in the local user database. In this case, no authentication policy can be configured at the group-interface context. For example:

• IPoE sessions

  config>subscr-mgmt>loc-user-db>ipoe>host# auth-policy policy-name

  or

  config>subscr-mgmt>loc-user-db>ipoe>host# diameter-auth-policy policy-name

• PPP sessions

  config>subscr-mgmt>loc-user-db>ppp>host# auth-policy policy-name

  or

  config>subscr-mgmt>loc-user-db>ppp>host# diameter-auth-policy policy-name

The MSAP parameters are configured at the local user database host context. For example:

config>subscr-mgmt>loc-user-db>ipoe>host# msap-defaults
config>subscr-mgmt>loc-user-db>ppp>host# msap-defaults

  - msap-defaults

[no] group-interface - Configure the group interface
[no] policy - Configure the MSAP policy
[no] service - Configure the service