The vRGW supports the following IPv6 host types:
IPv6 SLAAC hosts using an AAA-provisioned address or a local address assignment
IPv6 IA_NA hosts using DHCPv6 relay, an AAA-provisioned address, or a local address assignment
The vRGW only operates in IPoE bridge mode. For regular group interfaces, the IPoE bridge mode must be explicitly enabled before the BRG can be enabled. For WLAN-GW group interfaces, the IPoE bridge mode is implicitly assumed for a VLAN with BRG enabled. This has the following consequences:
SLAAC hosts from the same home can share a /64 prefix
when a local address assignment is used, SLAAC hosts from the same home are automatically assigned the same /64 prefix
IA_NA hosts from the same BRG can receive unique addresses from a shared /64 prefix. This prefix is automatically signaled in an RA