18. o Commands

18.1. oam

oam

Syntax

oam [interval seconds] [repeat repeat] [absolute| rate]

Context

[Tree] (monitor>port>atm>pvc oam)

Full Contexts

monitor port atm pvc oam

Description

This command monitors ATM PVC OAM statistics.

Parameters

seconds—

Configures the interval for each display in seconds.

Values—

3 to 60

Default—

repeat—

Configures how many times the command is repeated.

Values—

1 to 999

Default—

absolute—

Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate—

Displays rate-per-second for each statistic instead of the delta.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7950 XRS

oam

Syntax

oam [interval seconds] [repeat repeat] [absolute| rate]

Context

[Tree] (monitor>port>atm>pvp oam)

Full Contexts

monitor port atm pvp oam

Description

This command monitors ATM PVP OAM statistics.

Parameters

seconds—

Configures the interval for each display in seconds.

Values—

3 to 60

Default—

repeat—

Configures how many times the command is repeated.

Values—

1 to 999

Default—

absolute—

Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate—

Displays rate-per-second for each statistic instead of the delta.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7950 XRS

18.2. oam-config-summary

oam-config-summary

Syntax

oam-config-summary

Context

[Tree] (show>test-oam oam-config-summary)

Full Contexts

show test-oam oam-config-summary

Description

This command displays the OAM configuration resources in use, as well as the percentage of available and per-system limits for the platform. The various lines produced by the show command output vary by platform and may account for resource allocation in different ways. The resource accounting is tied to different resource pools across different platforms.

Output

The following output is an example of OAM configuration information.

The following output is an example for platforms that have separate resource pools for OAM-PM (tests and packet per second). OAM-PM resources are tracked separately from the background OAM and SAA tests and transmit capacity. The limits are platform-specific.

Sample Output

show test-oam oam-config-summary

-------------------------------------------------------------------------------

OAM-Managed Session Capacity (sessions)

-------------------------------------------------------------------------------

Resource InUse %InUse Limit

-------------------------------------------------------------------------------

Background ICMP Bridged Residential Gateway tests 0 0.0

Background ICMP Interface Control tests 0 0.0

Background OAM and SAA tests 0 0.0

LSP Self Ping test 0 0.0

OAM-PM tests 0 0.0

-------------------------------------------------------------------------------

OAM-Managed Transmit Capacity (pps)

-------------------------------------------------------------------------------

Resource InUse %InUse Limit

-------------------------------------------------------------------------------

Background OAM and SAA-continuous Tx capacity 0 0.0

LSP Self Ping Tx capacity 0 0.0

OAM-PM Tx capacity 0 0.0

The following is a sample output that can displayed for those platforms that have a common resource pool (tests and packet per second) for background OAM, OAM-PM and SAA.

show test-oam oam-config-summary

-------------------------------------------------------------------------------

OAM-Managed Test Capacity (tests)

-------------------------------------------------------------------------------

Resource InUse %InUse Limit

-------------------------------------------------------------------------------

Background OAM, OAM-PM, and SAA tests 0 0.0

Background ICMP Interface Control tests 0 0.0

LSP Self Ping tests 0 0.0

-------------------------------------------------------------------------------

OAM-Managed Transmit Capacity (pps)

-------------------------------------------------------------------------------

Resource InUse %InUse Limit

-------------------------------------------------------------------------------

Background OAM, OAM-PM, and SAA-continuous Tx capacity 0 0.2

LSP Self Ping Tx capacity 0 0.0

-------------------------------------------------------------------------------

The following table describes the Test OAM Configuration Limit fields.

Table 328: Test OAM Configuration Limit Fields

Label	Description
InUse	Specifies the number of resources in use
%InUse	Specifies the percentage of resources in use
Limit	Specifies the total number of available resources

Platforms

All

18.3. oam-perf

oam-perf

Syntax

oam-perf [detail]

Context

[Tree] (show>test-oam oam-perf)

Full Contexts

show test-oam oam-perf

Description

This command displays OAM performance information, including packet per second rates and the cumulative packets receive and transmitted. Statistics are cleared using the clear>test-oam>oam-perf command to properly interpret current data rate. The counts are displayed since the last clear and may be skewed because of irrelevant historical data.

Parameters

detail—

Displays detailed information.

Output

The following output is an example of OAM performance information.

Sample Output

show test-oam oam-perf

Current Time : 12/20/2018 20:22:49

Last Clear : 12/20/2018 20:21:08

Period Duration : 0d 00:01:41 (101.43 seconds)

Local Tests (Tx) : 251 packets, 2.47 packets/second

Remote Tests (Rx) : 0 packets, 0.00 packets/second

show test-oam oam-perf detail

Current Time : 12/20/2018 20:22:53

Last Clear : 12/20/2018 20:21:08

Period Duration : 0d 00:01:45 (105.29 seconds)

==============================================================================

OAM packets Tx by locally initiated tests and Rx from remotely initiated tests

==============================================================================

--- Local Tests ---- -- Remote Tests ----

OAM Type TxPackets Rate(pps) RxPackets Rate(pps)

------------------------------------------------------------------------------

Eth-CFM 0 0.00 0 0.00

ICMP 0 0.00 0 0.00

LSP 0 0.00 0 0.00

MAC CPE MFIB 0 0.00 0 0.00

MPLS DM 156 1.48 0 0.00

Multicast 0 0.00 0 0.00

SDP SVC 0 0.00 0 0.00

Twamp-Light 105 1.00 0 0.00

VCCV 0 0.00 0 0.00

VPRN 0 0.00 0 0.00

VXLAN 0 0.00 0 0.00

other 0 0.00 0 0.00

Total 261 2.48 0 0.00

==============================================================================

Platforms

All

oam-perf

Syntax

oam-perf

Context

[Tree] (clear>test-oam oam-perf)

Full Contexts

clear test-oam oam-perf

Description

This command clears OAM performance statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

oam-perf

Syntax

oam-perf [interval seconds] [repeat repeat] [{absolute | rate}]

Context

[Tree] (monitor>test-oam oam-perf)

Full Contexts

monitor test-oam oam-perf

Description

This command monitors the OAM performance statistics.

Parameters

seconds—

Specifies the time interval, in seconds.

Values—

3 to 60

repeat—

Specifies the number of times the command is repeated.

Values—

1 to 999

Default—

absolute—

Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.

rate—

Specifies that the rate-per-second is displayed.

Default—

delta

Platforms

All

18.4. oam-pm

oam-pm

Syntax

oam-pm

Context

[Tree] (show oam-pm)

Full Contexts

show oam-pm

Description

Commands in this context show Operations, Administration, and Maintenance Performance Management information.

Platforms

All

oam-pm

Syntax

oam-pm

Context

[Tree] (clear oam-pm)

Full Contexts

clear oam-pm

Description

Commands in this context clear Operations, Administration, and Maintenance Performance Management information.

Platforms

All

oam-pm

Syntax

oam-pm

Context

[Tree] (monitor oam-pm)

Full Contexts

monitor oam-pm

Description

Commands in this context monitor Operations, Administration, and Maintenance Performance Management information.

Platforms

All

18.5. oam-template

oam-template

Syntax

oam-template

Context

[Tree] (show>router>mpls>mpls-tp oam-template)

Full Contexts

show router mpls mpls-tp oam-template

Description

This command displays MPLS-TP OAM template information.

Output

The following output is an example of MPLS OAM template detail information.

Sample Output

*A:mlstp-dutA# show router mpls mpls-tp oam-template

===============================================================================

MPLS-TP OAM Templates

===============================================================================

Template Name : privatebed-oam-template Router ID : 1

BFD Template : privatebed-bfd-template Hold-Down Time: 0 centiseconds

Hold-Up Time : 20 deciseconds

===============================================================================

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

18.6. ocsp-cache

ocsp-cache

Syntax

ocsp-cache [entry-id]

Context

[Tree] (show>certificate ocsp-cache)

Full Contexts

show certificate ocsp-cache

Description

This command displays the current cached OCSP results. The output includes the following information:

Certificate issuer

Certificate serial number

OCSP result

Cache entry expire time

Parameters

entry-id—

Specifies the local cache entry identifier of the certificate that was validated by the OCSP responder.

Values—

1 to 2000

Platforms

All

18.7. of-switch

of-switch

Syntax

of-switch

of-switch ofs-name controller ip-address:port detail

of-switch ofs-name status controller [ip-address:port]

of-switch ofs-name controller

of-switch ofs-name flowtable

of-switch ofs-name status

of-switch ofs-name port

Context

[Tree] (show>open-flow of-switch)

Full Contexts

show open-flow of-switch

Description

This command displays information related to H-OFS configuration and operations as per the parameters specified.

If no parameter is specified, this command displays a summary for H-OFS instances configured.

Parameters

ofs-name—

Specifies the name of the configured H-OFS instance, up to 32 characters.

ip-address:port—

Displays information on the controller for the specified H-OFS instance.

Values—

ip-address: a.b.c.d

port: 1 to 65535

detail—

Displays detailed information.

flowtable—

Displays information about flowtables for the specified H-OFS instance.

status—

Displays status information for the specified H-OFS switch or its controller.

port—

Displays information about the logical OpenFlow ports registered with the specified H-OFS instance.

Output

Sample Output

*A:Dut-A# show open-flow of-switch "s1" status

===============================================================================

Open Flow Switch Information

===============================================================================

Switch Name : s1

Data Path ID : 0 Admin Status : Up

Echo Interval : 10 seconds Echo Multiple : 3

Logical Port Type : all

Buffer Size : 256 Num. of Tables : 1

Description : test-sw1

Capabilities Supp. : flow-stats table-stats port-stats

===============================================================================

*A:Dut-A# show open-flow of-switch "s1" controller

===============================================================================

Open Flow Controller Summary

===============================================================================

IP Address Port

-------------------------------------------------------------------------------

10.20.1.2 6633

10.20.1.3 6633

-------------------------------------------------------------------------------

Number of Controllers : 2

-------------------------------------------------------------------------------

===============================================================================

*A:Dut-A# show open-flow of-switch "s1" controller 10.20.1.2:6633 detail

===============================================================================

Open Flow Controller Information

===============================================================================

IP Address : 10.20.1.2 Port : 6633

Role : equal Generation ID : 0

-------------------------------------------------------------------------------

Open Flow Channel Information

-------------------------------------------------------------------------------

Channel ID : 1 Version : 4

Connection Type : primary Operational Status: Up

Operational Flags : socketStateEstablished helloReceived helloTransmitted

handshake

Async Fltr Packet In

(Master or Equal) : tableMiss applyAction

(Slave) : (Not Specified)

Async Fltr Port Status

(Master or Equal) : portAdd portDelete portModify

(Slave) : portAdd portDelete portModify

Async Fltr Flow Rem

(Master or Equal) : idleTimeOut hardTimeOut flowModDelete groupDelete

(Slave) : (Not Specified)

Echo Time Expiry : 0d 00:00:10 Hold Time Expiry : 0d 00:00:30

Conn. Uptime : 0d 00:00:00 Conn. Retry : 0d 00:00:00

-------------------------------------------------------------------------------

Open Flow Channel Stats - Channel ID(1)

-------------------------------------------------------------------------------

Packet Type Transmitted Packets Received Packets Error Packets

-------------------------------------------------------------------------------

Hello 1 1 0

Error 0 0 0

Echo Request 0 70 0

Echo Reply 70 0 0

Experimenter 0 0 0

Feat. Request 0 1 0

Feat. Reply 1 0 0

Get Cfg Request 0 1 0

Get Cfg Reply 1 0 0

Set Config 0 1 0

Packet In 0 0 0

Flow Removed 0 0 0

Port Status 0 0 6

Packet Out 0 0 0

Flow Modify 0 0 0

Group Modify 0 0 0

Port Modify 0 0 0

Table Modify 0 0 0

Multipart Req 0 0 0

Multipart Reply 0 0 0

Barrier Request 0 0 0

Barrier Reply 0 0 0

Get Q Cfg Req 0 0 0

Get Q Cfg Reply 0 0 0

Role Request 0 0 0

Role Reply 0 0 0

Get Async Req 0 0 0

Get Async Reply 0 0 0

Set Async 0 0 0

Meter Modify 0 0 0

-------------------------------------------------------------------------------

===============================================================================

*A:Dut-A# show open-flow of-switch "s1" flowtable

===============================================================================

Flow Table Information

===============================================================================

Flow Table ID : 0 Max-Size : 1000

No-Match Action : fall-through Curr Num. of Entries : 1

Max. Num. of Entries : 54

===============================================================================

*A:Dut-A# show open-flow of-switch "s1" port

===============================================================================

Open Flow Port Stats

===============================================================================

Port ID Port Name Transmitted Packets Transmitted Bytes

-------------------------------------------------------------------------------

1073741825 to_B 0 0

1073741826 to_C 0 0

1073741827 to_D 0 0

1073741828 to_E 0 0

1073741829 to_F 0 0

1073742824 1 0 0

===============================================================================

*A:Dut-C# show open-flow of-switch "ofs" controller 1.3.8.8:6633 detail

===============================================================================

Open Flow Controller Information

===============================================================================

IP Address : 1.3.8.8 Port : 6633

Role : equal

Generation ID : 0

-------------------------------------------------------------------------------

Open Flow Channel Information - Channel ID(2)

-------------------------------------------------------------------------------

Channel ID : 2 Version : 4

Connection Type : primary Operational Status: Up

Auxiliary ID : 0

Source Address : 10.20.1.3 Source Port : 49722

Operational Flags : socket-state-established hello-received hello-transmitted

handshake

Async Fltr Packet In

(Master or Equal): table-miss apply-action

(Slave) : (Not Specified)

Async Fltr Port Status

(Master or Equal): port-add port-delete port-modify

(Slave) : port-add port-delete port-modify

Async Fltr Flow Rem

(Master or Equal): idle-time-out hard-time-out flow-mod-delete group-delete

(Slave) : (Not Specified)

Echo Time Expiry : 0d 00:00:04 Hold Time Expiry : 0d 00:00:24

Conn. Uptime : 0d 01:27:53 Conn. Retry : 0d 00:00:00

-------------------------------------------------------------------------------

Open Flow Channel Stats - Channel ID(2)

-------------------------------------------------------------------------------

Packet Type Transmitted Packets Received Packets Error Packets

-------------------------------------------------------------------------------

Hello 0 0 0

Error 0 0 0

Echo Request 348 174 0

Echo Reply 174 348 0

Experimenter 0 0 0

Feat. Request 0 0 0

Feat. Reply 0 0 0

Get Cfg Request 0 0 0

Get Cfg Reply 0 0 0

Set Config 0 0 0

Packet In 0 0 0

Flow Removed 0 0 0

Port Status 0 0 0

Packet Out 0 0 0

Flow Modify 0 0 0

Group Modify 0 0 0

Port Modify 0 0 0

Table Modify 0 0 0

Multipart Req 0 0 0

Multipart Reply 0 0 0

Barrier Request 0 0 0

Barrier Reply 0 0 0

Get Q Cfg Req 0 0 0

Get Q Cfg Reply 0 0 0

Role Request 0 0 0

Role Reply 0 0 0

Get Async Req 0 0 0

Get Async Reply 0 0 0

Set Async 0 0 0

Meter Modify 0 0 0

-------------------------------------------------------------------------------

Open Flow Channel Information - Channel ID(3)

-------------------------------------------------------------------------------

Channel ID : 3 Version : 4

Connection Type : auxiliary Operational Status: Up

Auxiliary ID : 1

Source Address : 10.20.1.3 Source Port : 49748

Operational Flags : socket-state-established hello-received hello-transmitted

handshake

Async Fltr Packet In

(Master or Equal): table-miss apply-action

(Slave) : (Not Specified)

Async Fltr Port Status

(Master or Equal): port-add port-delete port-modify

(Slave) : port-add port-delete port-modify

Async Fltr Flow Rem

(Master or Equal): idle-time-out hard-time-out flow-mod-delete group-delete

(Slave) : (Not Specified)

Echo Time Expiry : 0d 00:00:02 Hold Time Expiry : 0d 00:00:22

Conn. Uptime : 0d 01:27:47 Conn. Retry : 0d 00:00:00

-------------------------------------------------------------------------------

Open Flow Channel Stats - Channel ID(3)

-------------------------------------------------------------------------------

Packet Type Transmitted Packets Received Packets Error Packets

-------------------------------------------------------------------------------

Hello 0 0 0

Error 0 0 0

Echo Request 348 174 0

Echo Reply 174 348 0

Experimenter 0 0 0

Feat. Request 0 0 0

Feat. Reply 0 0 0

Get Cfg Request 0 0 0

Get Cfg Reply 0 0 0

Set Config 0 0 0

Packet In 0 0 0

Flow Removed 0 0 0

Port Status 0 0 0

Packet Out 0 0 0

Flow Modify 0 0 0

Group Modify 0 0 0

Port Modify 0 0 0

Table Modify 0 0 0

Multipart Req 0 0 0

Multipart Reply 0 0 0

Barrier Request 0 0 0

Barrier Reply 0 0 0

Get Q Cfg Req 0 0 0

Get Q Cfg Reply 0 0 0

Role Request 0 0 0

Role Reply 0 0 0

Get Async Req 0 0 0

Get Async Reply 0 0 0

Set Async 0 0 0

Meter Modify 0 0 0

-------------------------------------------------------------------------------

Open Flow Channel Information - Channel ID(4)

-------------------------------------------------------------------------------

Channel ID : 4 Version : 4

Connection Type : auxiliary Operational Status: Up

Auxiliary ID : 2

Source Address : 10.20.1.3 Source Port : 49749

Operational Flags : socket-state-established hello-received hello-transmitted

handshake

Async Fltr Packet In

(Master or Equal): table-miss apply-action

(Slave) : (Not Specified)

Async Fltr Port Status

(Master or Equal): port-add port-delete port-modify

(Slave) : port-add port-delete port-modify

Async Fltr Flow Rem

(Master or Equal): idle-time-out hard-time-out flow-mod-delete group-delete

(Slave) : (Not Specified)

Echo Time Expiry : 0d 00:00:01 Hold Time Expiry : 0d 00:00:21

Conn. Uptime : 0d 01:27:49 Conn. Retry : 0d 00:00:00

-------------------------------------------------------------------------------

Open Flow Channel Stats - Channel ID(4)

-------------------------------------------------------------------------------

Packet Type Transmitted Packets Received Packets Error Packets

-------------------------------------------------------------------------------

Hello 0 0 0

Error 0 0 0

Echo Request 348 174 0

Echo Reply 174 348 0

Experimenter 0 0 0

Feat. Request 0 0 0

Feat. Reply 0 0 0

Get Cfg Request 0 0 0

Get Cfg Reply 0 0 0

Set Config 0 0 0

Packet In 104420 0 0

Flow Removed 0 0 0

Port Status 0 0 0

Packet Out 0 0 0

Flow Modify 0 0 0

Group Modify 0 0 0

Port Modify 0 0 0

Table Modify 0 0 0

Multipart Req 0 0 0

Multipart Reply 0 0 0

Barrier Request 0 0 0

Barrier Reply 0 0 0

Get Q Cfg Req 0 0 0

Get Q Cfg Reply 0 0 0

Role Request 0 0 0

Role Reply 0 0 0

Get Async Req 0 0 0

Get Async Reply 0 0 0

Set Async 0 0 0

Meter Modify 0 0 0

-------------------------------------------------------------------------------

===============================================================================

*A:Dut-C#

Platforms

All

of-switch

Syntax

of-switch ofs-name [flowtable of-table-id] [controller ip-address:port] [{grt | system | service-id service-id}] [cookie hex-string] [priority priority]

of-switch ofs-name [flowtable of-table-id] [controller ip-address:port] service-id service-id sap sap-id [cookie hex-string] [priority priority]

of-switch ofs-name [flowtable of-table-id] [controller ip-address:port] summary

Context

[Tree] (tools>dump>open-flow of-switch)

Full Contexts

tools dump open-flow of-switch

Description

This command can be used to dump information for a given OpenFlow switch or its flowtable. Priority and cookie filters are provided no focus on part of a flow table.

Usage examples:

a. tools>dump>open-flow>of-switch ofs-test — This command displays detailed flow information for a given OpenFlow switch. If the switch has switch-defined-cookie enabled, the flows with all cookie-types are displayed.

b. tools>dump>open-flow>of-switch ofs summary — This command displays a summary of each cookie context and the number of flows in it for the switch that has switch-defined-cookie enabled. If switch-defined-cookie is disabled, then the total number of entries is displayed (single context).

c. Options like grt, system, service-id, sap-id, cookie, and priority can be used to limit display entries to the specified options.

Parameters

ofs-name—

Specifies the name of the OFS instance, up to 32 characters.

of-table-id—

Specifies the identifier for the OpenFlow table.

Values—

ip-address:port—

Specifies the IP address and TCP port for the OpenFlow channel to the controller.

Values—

ip-address: a.b.c.d

port: 1 to 65535

grt—

Flowtable rules applicable to GRT instance (IES, Router).

system—

Flowtable rules applicable to system filters.

service-id—

Specifies the identifier for the service.

Values—

1 to 2148007978 | svc-name: 64 characters max

hex-string—

Specifies the identifier for the OpenFlow cookies.

Values—

0x0 to 0xFFFFFFFFFFFFFFFF

priority—

Specifies the priority for the OpenFlow switch.

Values—

0 to 65535

sap-id—

Specifies the identifier for the Ethernet SAP.

Values—

sap-id	null	port-id \| bundle-id \| bpgrp-id \| lag-id \| aps-id>
	dot1q	port-id \| bundle-id \| bpgrp-id \| lag-id \| aps-id \| pw-id>:qtag1
	qinq	port-id \| bundle-id \| bpgrp-id \| lag-id \| pw-id>:qtag1.qtag2
	atm	<port-id \| aps-id>[:vpi/vci \| vpi \| vpi1.vpi2 \| cp.conn-prof-id]
		cp	keyword
		conn-prof-id	1..8000
	frame	port-id \| aps-id:dlci
	cisco-hdlc	slot/mda/port.channel
	cem	slot/mda/port.channel
	ima-grp	bundle-id>[:vpi/vci \| vpi \| vpi1.vpi2 \| cp.conn-prof-id]
		cp	keyword
		conn-prof-id	1..8000
	port-id	slot/mda/port[.channel]
	bundle-id	bundle-<type>-slot/mda.bundle-num
		bundle	keyword
		type	ima, fr, ppp
		bundle-num	1..336
	bpgrp-id	bpgrp-<type>-<bpgrp-num>
		bpgrp	keyword
		type	ima, ppp
		bpgrp-num	1..2000
	aps-id	aps-<group-id>[.channel]
		aps	keyword
		group-id	1..64
	ccag-id	ccag-id.path-id[cc-type]<cc-id
		ccag	keyword
		id	1..8
		path-id	a, b
		cc-type	.sap-net, .net-sap
		cc-id	0..4094
	eth-tunnel	eth-tunnel-id[:eth-tun-sap-id]
		id	1..1024
		eth-tun-sap-id	0..4094
	lag-id	lag-id
		lag	keyword
		id	1..800
	pw-id	pw-id
		pw	keyword
		id	1..10239
	qtag1	*, 0..4094
	qtag2	* \| 0..4094
	vpi	0..4095 (NNI)
		0..255 (UNI)
	vci	1, 2, 5..65535
	dlci	16..1022
	tunnel-id	tunnel-id.private \| public:tag
		tunnel	keyword
		id	1..16
		tag	0..4094

summary—

Keyword to summarize output.

Output

Sample Output

===============================================================================

Switch: ofs

===============================================================================

Table : 0 Flow Pri : 0

Cookie : 0x0000000000000000 CookieType: grt

Controller: :::0

Filter Hnd: 0xC30000010000FFFF

Filter : _tmnx_ofs_ofs:1 entry 65535

In Port : *

VID : * Outer VID : *

EthType : *

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

IPv6ExtHdr: (Not Specified)

Action : Fall-through

Flow Flags: IPv4/6 [!E] [RO] [DEF]

Up Time : 0d 00:03:51 Add TS : 680828

Mod TS : 0 Stats TS : 703820

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 16

Cookie : 0x0000000000000000 CookieType: grt

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000010000FFEF

Filter : _tmnx_ofs_ofs:1 entry 65519

In Port : *

VID : * Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : 22.22.22.1/32

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Svc 99

Flow Flags: IPv4

Up Time : 0d 00:01:15 Add TS : 696581

Mod TS : 0 Stats TS : 703820

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 17

Cookie : 0xC000006300000000 CookieType: service 99

Controller: 1.3.8.8:6633

Filter Hnd: 0x8300000D0000FFEE

Filter : _tmnx_ofs_ofs:13 entry 65518

In Port : *

VID : * Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : 22.22.22.2/32

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On GRT

Flow Flags: IPv4

Up Time : 0d 00:01:10 Add TS : 697095

Mod TS : 0 Stats TS : 703820

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 4

Cookie : 0xC00007E200000000 CookieType: service 2018

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000050000FFFB

Filter : _tmnx_ofs_ofs:5 entry 65531

SAP : 1/1/3:0

In Port : 0x2218000

VID : 0x1000 Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap 1/1/3:0

Flow Flags: IPv4

Up Time : 0d 00:02:13 Add TS : 690788

Mod TS : 0 Stats TS : 703820

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 3

Cookie : 0xC00007E200000000 CookieType: service 2018

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000040000FFFC

Filter : _tmnx_ofs_ofs:4 entry 65532

SAP : 1/1/3:4094

In Port : 0x2218000

VID : 0x1ffe Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap 1/1/3:4094

Flow Flags: IPv4

Up Time : 0d 00:02:18 Add TS : 690274

Mod TS : 0 Stats TS : 703820

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 5

Cookie : 0xC00007E200000000 CookieType: service 2018

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000060000FFFA

Filter : _tmnx_ofs_ofs:6 entry 65530

SAP : lag-800:4094

In Port : 0x50000320

VID : 0x1ffe Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap lag-800:4094

Flow Flags: IPv4

Up Time : 0d 00:02:09 Add TS : 691201

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 8

Cookie : 0xC00007E300000000 CookieType: service 2019

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000090000FFF7

Filter : _tmnx_ofs_ofs:9 entry 65527

SAP : 2/1/3:1.0

In Port : 0x4218000

VID : 0x1000 Outer VID : 0x1001

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap 2/1/3:1.0

Flow Flags: IPv4

Up Time : 0d 00:01:56 Add TS : 692448

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 7

Cookie : 0xC00007E300000000 CookieType: service 2019

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000080000FFF8

Filter : _tmnx_ofs_ofs:8 entry 65528

SAP : 2/1/3:4094.4094

In Port : 0x4218000

VID : 0x1ffe Outer VID : 0x1ffe

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap 2/1/3:4094.4094

Flow Flags: IPv4

Up Time : 0d 00:02:01 Add TS : 692032

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 10

Cookie : 0xC00007E300000000 CookieType: service 2019

Controller: 1.3.8.8:6633

Filter Hnd: 0x8300000B0000FFF5

Filter : _tmnx_ofs_ofs:11 entry 65525

SAP : lag-799:4094.4094

In Port : 0x5000031f

VID : 0x1ffe Outer VID : 0x1ffe

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap lag-799:4094.4094

Flow Flags: IPv4

Up Time : 0d 00:01:46 Add TS : 693483

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 1

Cookie : 0xC00007E400000000 CookieType: service 2020

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000020000FFFE

Filter : _tmnx_ofs_ofs:2 entry 65534

SAP : 2/1/4

In Port : 0x4220000

VID : 0x0 Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap 2/1/4

Flow Flags: IPv4

Up Time : 0d 00:02:27 Add TS : 689443

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 12

Cookie : 0xC00007E400000000 CookieType: service 2020

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000020000FFF3

Filter : _tmnx_ofs_ofs:2 entry 65523

SAP : 2/1/4

In Port : 0x4220000

VID : 0x0 Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward Sdp 12:4294967295

Flow Flags: IPv4

Up Time : 0d 00:01:36 Add TS : 694524

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 13

Cookie : 0xC00007E400000000 CookieType: service 2020

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000020000FFF2

Filter : _tmnx_ofs_ofs:2 entry 65522

SAP : 2/1/4

In Port : 0x4220000

VID : 0x0 Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Nhop(Indirect)

Nhop: 200.180.200.180

Flow Flags: IPv4

Up Time : 0d 00:01:31 Add TS : 695037

Mod TS : 0 Stats TS : 703821

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 15

Cookie : 0xC00007E400000000 CookieType: service 2020

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000020000FFF0

Filter : _tmnx_ofs_ofs:2 entry 65520

SAP : 2/1/4

In Port : 0x4220000

VID : 0x0 Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward LspId 1

Lsp lsp1

Flow Flags: IPv4

Up Time : 0d 00:01:21 Add TS : 696067

Mod TS : 0 Stats TS : 703822

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 14

Cookie : 0xC00007E400000000 CookieType: service 2020

Controller: 1.3.8.8:6633

Filter Hnd: 0x430000020000FFF1

Filter : _tmnx_ofs_ofs:2 entry 65521

SAP : 2/1/4

In Port : 0x4220000

VID : 0x0 Outer VID : *

EthType : 0x86dd

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

IPv6ExtHdr: (Not Specified)

Action : Forward On Nhop(Indirect)

Nhop: 3ffe:1111:1111:2222:2222:3333:3333:4444

Flow Flags: IPv6

Up Time : 0d 00:01:26 Add TS : 695551

Mod TS : 0 Stats TS : 703822

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 2

Cookie : 0xC00007E400000000 CookieType: service 2020

Controller: 1.3.8.8:6633

Filter Hnd: 0x830000030000FFFD

Filter : _tmnx_ofs_ofs:3 entry 65533

SAP : lag-798

In Port : 0x5000031e

VID : 0x0 Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : *

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Sap

Sap lag-798

Flow Flags: IPv4

Up Time : 0d 00:02:23 Add TS : 689857

Mod TS : 0 Stats TS : 703822

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 19

Cookie : 0x8000000000000000 CookieType: system

Controller: 1.3.8.8:6633

Filter Hnd: 0x4300000E0000FFEC

Filter : _tmnx_ofs_ofs:14 entry 65516

In Port : *

VID : * Outer VID : *

EthType : 0x86dd

Src IP : *

Dst IP : 3ffe::1616:1601/128

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

IPv6ExtHdr: (Not Specified)

Action : Forward On Nhop(Indirect)

Nhop: 3ffe:1111:1111:2222:2222:3333:3333:4444

Flow Flags: IPv6

Up Time : 0d 00:01:01 Add TS : 698121

Mod TS : 0 Stats TS : 703822

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Table : 0 Flow Pri : 18

Cookie : 0x8000000000000000 CookieType: system

Controller: 1.3.8.8:6633

Filter Hnd: 0x8300000E0000FFED

Filter : _tmnx_ofs_ofs:14 entry 65517

In Port : *

VID : * Outer VID : *

EthType : 0x0800

Src IP : *

Dst IP : 22.22.22.1/32

IP Proto : * DSCP : *

Src Port : * Dst Port : *

ICMP Type : * ICMP Code : *

Label : *

Action : Forward On Nhop(Indirect)

Nhop: 200.180.200.180

Flow Flags: IPv4

Up Time : 0d 00:01:06 Add TS : 697608

Mod TS : 0 Stats TS : 703822

#Packets : 0 #Bytes : 0

-------------------------------------------------------------------------------

Number of flows: 17

===============================================================================

*A:Dut-C#

Platforms

All

18.8. omcr

omcr

Syntax

omcr

Context

[Tree] (show>redundancy>multi-chassis omcr)

Full Contexts

show redundancy multi-chassis omcr

Description

Commands in this context display OMCR information for subscribers.

Platforms

7750 SR

18.9. on-change-paths

on-change-paths

Syntax

on-change-paths

on-change-paths {open-config | nokia}

Context

[Tree] (tools>dump>system>telemetry on-change-paths)

Full Contexts

tools dump system telemetry on-change-paths

Description

This command lists all paths supporting on-change notifications. The keywords open-config and nokia indicate which model should be used as a reference for the output.

Parameters

open-config —

Indicates that the open-config model will be used as the output reference.

nokia —

Indicates that the Nokia model will be used as the output reference.

Output

Sample Output

A:node-6# tools dump system telemetry on-change-paths nokia

===============================================================================

Nokia on-change state paths

===============================================================================

/state/log/log-id/oper-state

/state/port/ethernet/lldp/dest-mac/remote-system/chassis-id

/state/port/ethernet/lldp/dest-mac/remote-system/chassis-id-subtype

/state/port/ethernet/lldp/dest-mac/remote-system/remote-port-id

/state/port/ethernet/lldp/dest-mac/remote-system/remote-port-id-subtype

/state/port/ethernet/lldp/dest-mac/remote-system/port-description

/state/port/ethernet/lldp/dest-mac/remote-system/system-enabled-capabilities

/state/port/ethernet/lldp/dest-mac/remote-system/system-supported-capabilities

/state/port/ethernet/lldp/dest-mac/remote-system/system-description

/state/port/ethernet/lldp/dest-mac/remote-system/system-name

/state/port/ethernet/lldp/dest-mac/remote-system/mgmt-address/interface-subtype

/state/port/ethernet/lldp/dest-mac/remote-system/mgmt-address/interface-id

/state/port/ethernet/lldp/dest-mac/remote-system/mgmt-address/object-identifier

/state/router/interface/if-oper-status

/state/router/isis/interface/level/oper-metric/ipv4-unicast

/state/router/isis/interface/level/oper-metric/ipv6-unicast

/state/router/isis/interface/level/oper-metric/ipv4-multicast

/state/router/isis/interface/level/oper-metric/ipv6-multicast

/state/router/mpls/lsp/oper-state

/state/router/mpls/lsp/primary/mbb/last-mbb/type

/state/router/mpls/lsp/primary/mbb/last-mbb/end-time

/state/router/mpls/lsp/primary/mbb/last-mbb/metric

/state/router/mpls/lsp/primary/mbb/last-mbb/state

/state/router/mpls/lsp/primary/mbb/last-mbb/signaled-bw

/state/router/mpls/lsp/secondary/mbb/last-mbb/type

/state/router/mpls/lsp/secondary/mbb/last-mbb/end-time

/state/router/mpls/lsp/secondary/mbb/last-mbb/metric

/state/router/mpls/lsp/secondary/mbb/last-mbb/state

/state/router/mpls/lsp/secondary/mbb/last-mbb/signaled-bw

/state/service/ies/interface/if-oper-status

/state/service/vprn/interface/if-oper-status

/state/service/vprn/log/log-id/oper-state

/state/system/lldp/chassis-id

/state/system/lldp/chassis-id-subtype

/state/system/lldp/system-name

/state/system/lldp/system-description

/state/system/telemetry/grpc/subscription/path/deferred-collection-count

===============================================================================

Platforms

All

18.10. opaque-database

opaque-database

Syntax

opaque-database [area area-id | as] [adv-router router-id] [ls-id] [detail]

Context

[Tree] (show>router>ospf opaque-database)

Full Contexts

show router ospf opaque-database

Description

This command displays OSPF opaque database information.

Parameters

area area-id—

Displays all opaque databases configured in this area.

Values—

ip-address — a.b.c.d

area — 0 to 4294967295

as—

Displays opaque databases configured in the autonomous system (AS).

adv-router router-id [ls-id]—

Displays opaque database information associated with the specified advertising router. To further narrow the number of items displayed, the ls-id can optionally be specified.

Output

OSPF Opaque Database Output

Table 329 describes the OSPF opaque database output fields.

Table 329: OSPF Opaque Database Output Fields

Label	Description
Area Id	A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
Type	NSSA — This area is configured as an NSSA area. Area — This area is configured as a standard area (not NSSA or stub). Stub — This area is configured as an NSSA area.
Link State Id	The link state ID is an LSA type specific field containing either a Router-Id or an IP Address; it identifies the piece of the routing domain being described by the advertisement.
Adv Rtr Id	The router identifier of the router advertising the LSA.
Age	The age of the link state advertisement in seconds.
Sequence	The signed 32-bit integer sequence number.
Cksum	The 32-bit unsigned sum of the link-state advertisements' LS checksums.

Sample Output

*A:Dut-C# show router ospf opaque-database

===============================================================================

Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type : All)

===============================================================================

Type Id Link State Id Adv Rtr Id Age Sequence Cksum

-------------------------------------------------------------------------------

Area 0.0.0.0 4.0.0.0 10.20.1.2 740 0x80000002 0x5653

Area 0.0.0.0 7.0.0.2 10.20.1.2 745 0x80000001 0xee35

Area 0.0.0.0 7.16.0.6 10.20.1.2 725 0x80000002 0xe434

Area 0.0.0.0 8.0.0.6 10.20.1.2 730 0x80000002 0x5f1d

Area 0.0.0.0 8.0.0.7 10.20.1.2 731 0x80000002 0xbeb8

Area 0.0.0.0 4.0.0.0 10.20.1.3 739 0x80000002 0x6dd6

Area 0.0.0.0 7.0.0.2 10.20.1.3 744 0x80000001 0x1601

Area 0.0.0.0 7.16.0.2 10.20.1.3 734 0x80000001 0x914

Area 0.0.0.0 8.0.0.6 10.20.1.3 728 0x80000002 0x8ac1

Area 0.0.0.0 8.0.0.7 10.20.1.3 729 0x80000002 0xf57b

Area 0.0.0.0 4.0.0.0 10.20.1.4 740 0x80000002 0x15ba

Area 0.0.0.0 7.0.0.2 10.20.1.4 745 0x80000001 0x3dcc

Area 0.0.0.0 7.16.0.3 10.20.1.4 736 0x80000001 0xda04

Area 0.0.0.0 8.0.0.4 10.20.1.4 732 0x80000002 0xfe4a

Area 0.0.0.0 8.0.0.5 10.20.1.4 732 0x80000002 0x4f1f

Area 0.0.0.0 4.0.0.0 10.20.1.5 738 0x80000002 0x746e

Area 0.0.0.0 7.0.0.2 10.20.1.5 744 0x80000001 0x6498

Area 0.0.0.0 7.16.0.6 10.20.1.5 730 0x80000001 0xb624

Area 0.0.0.0 8.0.0.4 10.20.1.5 729 0x80000002 0x50f1

Area 0.0.0.0 8.0.0.5 10.20.1.5 730 0x80000002 0xc279

Area 0.0.0.1 4.0.0.0 10.20.1.1 740 0x80000002 0xf5a0

Area 0.0.0.1 7.0.0.2 10.20.1.1 745 0x80000001 0xc769

Area 0.0.0.1 8.0.0.4 10.20.1.1 730 0x80000002 0x3f46

Area 0.0.0.1 8.0.0.5 10.20.1.1 731 0x80000002 0x7e02

Area 0.0.0.1 4.0.0.0 10.20.1.2 739 0x80000002 0x5653

Area 0.0.0.1 7.16.0.1 10.20.1.2 744 0x80000001 0x46cc

Area 0.0.0.1 7.16.0.2 10.20.1.2 735 0x80000001 0x9663

Area 0.0.0.1 7.16.0.3 10.20.1.2 734 0x80000001 0xe6f9

Area 0.0.0.1 7.16.0.4 10.20.1.2 725 0x80000002 0xad3d

Area 0.0.0.1 7.16.0.5 10.20.1.2 725 0x80000002 0x49b8

Area 0.0.0.1 8.0.0.4 10.20.1.2 730 0x80000002 0x3324

Area 0.0.0.1 8.0.0.5 10.20.1.2 731 0x80000002 0x89f3

Area 0.0.0.1 4.0.0.0 10.20.1.3 739 0x80000002 0x6dd6

Area 0.0.0.1 7.16.0.1 10.20.1.3 743 0x80000001 0x6d98

Area 0.0.0.1 7.16.0.3 10.20.1.3 723 0x80000002 0xdeff

Area 0.0.0.1 7.16.0.4 10.20.1.3 729 0x80000001 0xa941

Area 0.0.0.1 7.16.0.5 10.20.1.3 724 0x80000002 0x7084

Area 0.0.0.1 7.16.0.6 10.20.1.3 724 0x80000002 0xcff

Area 0.0.0.1 8.0.0.4 10.20.1.3 730 0x80000002 0xada2

Area 0.0.0.1 8.0.0.5 10.20.1.3 730 0x80000002 0x9bb2

-------------------------------------------------------------------------------

No. of Opaque LSAs: 40

===============================================================================

A:ALA-A# show router ospf 1 opaque-database

===============================================================================

Rtr Base OSPFv2 Instance 1 Opaque Link State Database (type : All)

===============================================================================

Area Id Type Link State Id Adv Rtr Id Age Sequence Cksum

-------------------------------------------------------------------------------

0.0.0.0 Area 1.0.0.1 180.0.0.2 205 0x8000007e 0xb1b2

0.0.0.0 Area 1.0.0.1 180.0.0.5 617 0x80000084 0xb1a6

0.0.0.0 Area 1.0.0.1 180.0.0.8 1635 0x80000081 0xc391

0.0.0.0 Area 1.0.0.1 180.0.0.9 1306 0x80000082 0xc58c

0.0.0.0 Area 1.0.0.1 180.0.0.10 53 0x80000082 0xc986

0.0.0.0 Area 1.0.0.1 180.0.0.11 577 0x8000007e 0xd57c

0.0.0.0 Area 1.0.0.1 180.0.0.12 1628 0x80000080 0xd578

0.0.0.0 Area 1.0.0.1 180.0.0.13 581 0x80000080 0xd972

0.0.0.0 Area 1.0.0.1 180.0.0.22 1006 0x80000080 0xfd3c

0.0.0.0 Area 1.0.0.1 180.0.0.23 1238 0x80000083 0xfb39

0.0.0.0 Area 1.0.0.1 180.0.0.27 55 0x80000083 0xc21

0.0.0.0 Area 1.0.0.1 180.0.0.28 389 0x80000083 0x101b

0.0.0.0 Area 1.0.0.1 180.0.0.29 1658 0x80000082 0x1614

0.0.0.0 Area 1.0.0.1 180.0.0.30 976 0x80000083 0x180f

0.0.0.0 Area 1.0.0.2 180.0.0.2 45 0x800000a0 0x2f60

0.0.0.0 Area 1.0.0.2 180.0.0.5 1357 0x80000084 0x7038

0.0.0.0 Area 1.0.0.2 180.0.0.8 1960 0x80000084 0x3472

...

-------------------------------------------------------------------------------

No. of Opaque LSAs: 88

===============================================================================

A:ALA-A#

*A:Dut-C# show router ospf opaque-database adv-router 10.20.1.5

===============================================================================

Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type : All)

===============================================================================

Type Id Link State Id Adv Rtr Id Age Sequence Cksum

-------------------------------------------------------------------------------

Area 0.0.0.0 4.0.0.0 10.20.1.5 750 0x80000002 0x746e

Area 0.0.0.0 7.0.0.2 10.20.1.5 756 0x80000001 0x6498

Area 0.0.0.0 7.16.0.6 10.20.1.5 742 0x80000001 0xb624

Area 0.0.0.0 8.0.0.4 10.20.1.5 741 0x80000002 0x50f1

Area 0.0.0.0 8.0.0.5 10.20.1.5 742 0x80000002 0xc279

-------------------------------------------------------------------------------

No. of Opaque LSAs: 5

===============================================================================

*A:Dut-C# show router ospf opaque-database adv-router 10.20.1.5 detail

===============================================================================

Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type : All) (detail)

===============================================================================

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5

Link State Id : 4.0.0.0 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0x746e

Age : 752 Length : 52

Options : E

Advertisement : Router Info

Capabilities (1) Len 4 :

0x14

SR algorithm (8) Len 1 :

0x0

SR label range (9) Len 12 :

Range-size=1001

Sub-TLV SID/label(1) len 3 :

label=25000

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5

Link State Id : 7.0.0.2 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x6498

Age : 758 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=1 pfxLen=32 AF=0 pfx=10.20.1.5

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=55

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5

Link State Id : 7.16.0.6 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xb624

Age : 744 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.6

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=66

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5

Link State Id : 8.0.0.4 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0x50f1

Age : 743 Length : 52

Options : E

Advertisement : Extended Link

TLV Extended link (1) Len 28 :

link Type=Transit (2) Id=1.3.5.5 Data=1.3.5.5

Sub-TLV LAN-Adj-SID (3) len 11 :

Flags=Value Local (0x60)

MT-ID=0 Weight=0 Neighbor-ID=10.20.1.3

SID/Index/Label=262139

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5

Link State Id : 8.0.0.5 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0xc279

Age : 744 Length : 52

Options : E

Advertisement : Extended Link

TLV Extended link (1) Len 28 :

link Type=Transit (2) Id=1.4.5.5 Data=1.4.5.5

Sub-TLV LAN-Adj-SID (3) len

===============================================================================

*A:Dut-A# show router ospf 1 opaque-database adv-router 10.20.1.1 detail

==============================================================================

Rtr Base OSPFv2 Instance 1 Opaque Link State Database (type : All) (detail)

==============================================================================

------------------------------------------------------------------------------

Opaque LSA

------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.1

Link State Id : 1.0.0.1 LSA Type : Area Opaque

Sequence No : 0x80000028 Checksum : 0xb136

Age : 192 Length : 28

Options : E

ROUTER-ID TLV (0001) Len 4 : 10.20.1.1

------------------------------------------------------------------------------

Opaque LSA

------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.1

Link State Id : 1.0.0.2 LSA Type : Area Opaque

Sequence No : 0x8000000d Checksum : 0x17f3

Age : 678 Length : 164

Options : E

LINK INFO TLV (0002) Len 140 :

Sub-TLV: 1 Len: 1 LINK_TYPE : 2

Sub-TLV: 2 Len: 4 LINK_ID : 10.10.1.2

Sub-TLV: 3 Len: 4 LOC_IP_ADDR : 10.10.1.1

Sub-TLV: 4 Len: 4 REM_IP_ADDR : 0.0.0.0

Sub-TLV: 5 Len: 4 TE_METRIC : 1000

Sub-TLV: 6 Len: 4 MAX_BDWTH : 100000 Kbps

Sub-TLV: 7 Len: 4 RSRVBL_BDWTH : 800000 Kbps

Sub-TLV: 8 Len: 32 UNRSRVD_CLS0 :

P0: 80000 Kbps P1: 320000 Kbps P2: 320000 Kbps P3: 320000 Kbps

P4: 400000 Kbps P5: 400000 Kbps P6: 400000 Kbps P7: 80000 Kbps

Sub-TLV: 9 Len: 4 ADMIN_GROUP : 0 None

Sub-TLV: 17 Len: 36 TELK_BW_CONST:

BW Model : MAM

BC0: 80000 Kbps BC1: 0 Kbps BC2: 320000 Kbps BC3: 0 Kbps

BC4: 0 Kbps BC5: 400000 Kbps BC6: 0 Kbps BC7: 0 Kbps

==============================================================================

*A:Dut-A#

*A:Dut-F# show router ospf opaque-database adv-router 10.20.1.6 detail

===============================================================================

Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type: All) (detail)

===============================================================================

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 4.0.0.0 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0x590e

Age : 288 Length : 52

Options : E

Advertisement : Router Info

Capabilities (1) Len 4 :

0x14

SR algorithm (8) Len 2 :

0x0 0x2

SR label range (9) Len 12 :

Range-size=1000

Sub-TLV SID/label(1) len 3 :

label=70000

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.0.0.7 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x899a

Age : 292 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=1 pfxLen=32 AF=0 pfx=10.20.1.6

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=9

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.2 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x6d0b

Age : 292 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=1.0.66.6

Flags=Att Node (0xc0)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=3

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.9 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xfa1e

Age : 288 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=1.0.33.3

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=0

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.10 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x40d4

Age : 288 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.3

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=6

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.11 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xcb52

Age : 288 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=1.0.22.2

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=5

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.12 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x7898

Age : 288 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.1

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=10

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.13 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xff29

Age : 288 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=1.0.11.1

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=4

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 8.0.0.2 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0x3098

Age : 289 Length : 48

Options : E

Advertisement : Extended Link

TLV Extended link (1) Len 24 :

link Type=P2P (1) Id=10.20.1.2 Data=1.0.26.6

Sub-TLV Adj-SID (2) len 7 :

Flags=Backup Value Local (0xe0)

MT-ID=0 Weight=0 SID/Index/Label=262143

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6

Link State Id : 8.0.0.4 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0xc9b

Age : 289 Length : 48

Options : E

Advertisement : Extended Link

TLV Extended link (1) Len 24 :

link Type=P2P (1) Id=10.20.1.5 Data=1.0.56.6

Sub-TLV Adj-SID (2) len 7 :

Flags=Backup Value Local (0xe0)

MT-ID=0 Weight=0 SID/Index/Label=262141

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 4.0.0.0 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0x590e

Age : 290 Length : 52

Options : E

Advertisement : Router Info

Capabilities (1) Len 4 :

0x14

SR algorithm (8) Len 2 :

0x0 0x2

SR label range (9) Len 12 :

Range-size=1000

Sub-TLV SID/label(1) len 3 :

label=70000

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.0.0.6 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xf214

Age : 295 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=1 pfxLen=32 AF=0 pfx=1.0.66.6

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=3

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.1 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x7cc6

Age : 290 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=1 pfxLen=32 AF=0 pfx=1.0.22.2

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP Backup (0x42)

MT-ID=0 Algorithm=2 SID/Index/Label=996

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.3 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x491

Age : 296 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.6

Flags=Att Node (0xc0)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=9

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.4 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x9c67

Age : 291 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=1.0.55.5

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=2

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.5 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xc253

Age : 291 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.5

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=8

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.6 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xd03e

Age : 291 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=1.0.44.4

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=1

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.7 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0x868f

Age : 291 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.4

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=7

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 7.16.0.8 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xc84a

Age : 291 Length : 44

Options : E

Advertisement : Extended Prefix

TLV Extended prefix (1) Len 20 :

rtType=3 pfxLen=32 AF=0 pfx=10.20.1.2

Flags=Node (0x40)

Sub-TLV Prefix SID (2) len 8 :

Flags=noPHP (0x40)

MT-ID=0 Algorithm=0 SID/Index/Label=11

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 8.0.0.3 LSA Type : Area Opaque

Sequence No : 0x80000002 Checksum : 0xc1fb

Age : 292 Length : 48

Options : E

Advertisement : Extended Link

TLV Extended link (1) Len 24 :

link Type=P2P (1) Id=10.20.1.3 Data=1.0.36.6

Sub-TLV Adj-SID (2) len 7 :

Flags=Backup Value Local (0xe0)

MT-ID=0 Weight=0 SID/Index/Label=262142

-------------------------------------------------------------------------------

Opaque LSA

-------------------------------------------------------------------------------

Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6

Link State Id : 8.0.0.5 LSA Type : Area Opaque

Sequence No : 0x80000001 Checksum : 0xbc0d

Age : 298 Length : 48

Options : E

Advertisement : Extended Link

TLV Extended link (1) Len 24 :

link Type=P2P (1) Id=10.20.1.2 Data=1.0.26.6

Sub-TLV Adj-SID (2) len 7 :

Flags=Backup Value Local (0xe0)

MT-ID=0 Weight=0 SID/Index/Label=262140

===============================================================================

*A:Dut-F#

Platforms

All

18.11. open-flow

open-flow

Syntax

open-flow

Context

[Tree] (show open-flow)

Full Contexts

show open-flow

Description

Displays OpenFlow switch hybrid information.

Platforms

All

open-flow

Syntax

open-flow of-switch ofs-name controller ip-address:port [channel channel-id] statistics

open-flow of-switch ofs-name controller ip-address:port [vprn service-id ofc-loopback ip-address] statistics

Context

[Tree] (clear open-flow)

Full Contexts

clear open-flow

Description

This command clears the OpenFlow statistics.

Parameters

ofs-name—

Specifies the name of the OFS instance, up to 32 characters.

ip-address:port—

Specifies the IP address and TCP port for the OpenFlow channel to the controller.

Values—

ipv4-address:	a.b.c.d:port
ipv6-address:	[x:x:x:x:x:x:x:x]:port (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x:	[0 to FFFF]H
	d:	[0 to 255]D
	port	1 to 65535

channel-id—

Specifies the channel ID.

Values—

1 to 65535

service-id—

Specifies the service ID.

Values—

1 to 2147483647

ip-address—

Specifies the IP address for the OpenFlow channel to the controller.

Values—

ipv4-address:	a.b.c.d
ipv6-address:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x:	[0 to FFFF]H
	d:	[0 to 255]D

Platforms

All

open-flow

Syntax

open-flow

Context

[Tree] (tools>dump open-flow)

Full Contexts

tools dump open-flow

Description

This command enables dumping of the OpenFlow information.

Platforms

All

18.12. oper-group

oper-group

Syntax

oper-group [group-name]

oper-group [group-name] detail

oper-group [group-name] members [sap] [sdp] [site] [bgp-evpn]

oper-group [group-name] monitoring [sap] [sdp] [site] [mvrp]

Context

[Tree] (show>service oper-group)

Full Contexts

show service oper-group

Description

This command displays oper-group information, member count, monitor-client count, and status in a single line for each of the configured oper-groups.

Parameters

group-name—

Displays oper-group information.

detail—

Displays detailed information for each of the configured oper-groups.

members—

Displays the members of the specified oper-group, or all oper-groups. A filter can be applied on the output to display only required member type, by specifying an optional parameter.

Values—

sap, sdp, site, bgp-evpn

monitoring—

displays the clients that are monitoring the specified oper-group, or all oper-groups. A filter can be applied on the output to display only required client type, by specifying an optional parameter.

Values—

sap, sdp, site, mvrp

Output

The following displays server oper group information. Table 330 describes the output fields.

Sample Output

*A:Dut-B# show service oper-group

===============================================================================

Service Oper Group Information

===============================================================================

Name Oper Creation Hold Hold Members Monitor

Status Origin UpTime DnTime

(secs) (secs)

-------------------------------------------------------------------------------

og-test up manual 4 0 4 4

-------------------------------------------------------------------------------

Entries found: 1

=====================================================================

*A:Dut-B#

*A:Dut-B# show service oper-group detail

=====================================================================

Service Oper Group Information

=====================================================================

Oper Group : og-test

Creation Origin : manual Oper Status : up

Hold DownTime : 0 secs Hold UpTime : 4 secs

Members : 4 Monitoring : 4

=====================================================================

===================================================================

Member SDP-Binds for OperGroup: og-test

===================================================================

SdpId SvcId Type IP address Adm Opr

-------------------------------------------------------------------

201:1 1 Spok 10.20.1.1 Up Up

201:2 1 Spok 10.20.1.1 Up Up

-------------------------------------------------------------------

SDP Entries found: 4

===================================================================

Monitoring SDP-Binds for OperGroup: og-test

===================================================================

SdpId SvcId Type IP address Adm Opr

-------------------------------------------------------------------

205:1 1 Spok 10.20.1.5 Up Up

205:2 1 Spok 10.20.1.5 Up Up

-------------------------------------------------------------------

SDP Entries found: 4

===================================================================

*A:Dut-B#

A:admin@PE-2# show service oper-group "llf-1" detail

===============================================================================

Service Oper Group Information

===============================================================================

Oper Group : llf-1

Creation Origin : manual Oper Status: down

Hold DownTime : 0 secs Hold UpTime: 4 secs

Members : 1 Monitoring : 1

===============================================================================

Member BGP-EVPN for OperGroup: llf-1

===============================================================================

SvcId:Instance (Type) Status

-------------------------------------------------------------------------------

500:1 (mpls) Inactive

-------------------------------------------------------------------------------

BGP-EVPN Entries found: 1

===============================================================================

Monitoring LAG for OperGroup: llf-1

===============================================================================

Lag-Id Adm Opr Weighted Threshold Up-Count Act/Stdby

-------------------------------------------------------------------------------

1 up down No 0 0 N/A

-------------------------------------------------------------------------------

LAG Entries found: 1

===============================================================================

Table 330: oper-group detail Field Descriptions

Label	Description
Oper Group	The name of the operational group being monitored.
Creation Origin	Displays how the operational group was created.
Oper Status	Displays the operational status.
Hold Downtime	Displays the time, in seconds, that the system waits before declaring the status as “down”.
Hold UpTime	Displays the time, in seconds, that the system waits before declaring the status as “up”.
Members	Displays the number of members.
Monitoring	Displays the number of objects monitoring the operational group.
SdpId	Displays the SDP ID.
SvcId	Displays the SVC ID.
Type	Displays the type of SDP binding.
IP address	Displays the IP address
Adm	Displays the administrative state.
Opr	Displays the operational state.
SvcId:Instance	Displays the SVC ID and EVPN instance number.
(Type)	Displays the instance type.
Status	Displays the status of the EVPN instance.
Lag-Id	Displays the monitoring LAG ID.
Weighted	Displays whether or not the LAG is weighted.
Threshold	Displays the threshold number.
Up-Count	Displays the up-count number.
Act/Stdby	Displays whether the LAG is active or standby.

Platforms

All

18.13. optimal-route-reflection

optimal-route-reflection

Syntax

optimal-route-reflection

Context

[Tree] (show>router>bgp optimal-route-reflection)

Full Contexts

show router bgp optimal-route-reflection

Description

Commands in this context display optimal route reflection (ORR) information.

Platforms

All

18.14. origin-validation

origin-validation

Syntax

origin-validation

Context

[Tree] (show>router origin-validation)

Full Contexts

show router origin-validation

Description

Commands in this context display origin validation information.

Platforms

All

origin-validation

Syntax

origin-validation rpki-session ip-address

Context

[Tree] (clear>router origin-validation)

Full Contexts

clear router origin-validation

Description

This command creates the context to clear and reset origin validation entities.

Parameters

ip-address—

Clears the origin validation entities associated with the specified IP address.

Values—

ipv4-address:	a.b.c.d
ipv6-address	x:x:x:x:x:x:x:x	[-interface]
	x:x:x:x:x:x:d.d.d.d	[-interface]
	x:	[0 to FFFF]H
	d:	[0 to 255]D
	interface	up to 32 characters, mandatory for link local addresses

Platforms

All

18.15. ospf

ospf

Syntax

ospf [instance ospf-instance] [area area-id]

Context

[Tree] (tools>dump>router>te-database ospf)

Full Contexts

tools dump router te-database ospf

Description

Commands in this context dump the OSPF traffic engineering database.

Parameters

ospf-instance—

Specifies the OSPF instance.

Values—

0 to 31

area-id—

Specifies the OSPF area ID.

Values—

ip-address, 0 to 4294967295

Output

The following outputs are examples of OSPF traffic engineering database information.

Sample Output

*A:Dut-C# tools dump router te-database ospf

===================================================================================

Rtr: 10.10.10.3 Addr: 10.10.10.3 OSPF/0/0.0.0.0

Rtr: 10.10.10.4 Addr: 0.0.0.0 OSPF/0/0.0.0.0

AdvRtr: 10.10.10.3 Nghb: 10.10.10.4 OSPF/0/0.0.0.0

LocIp/Id 100.100.101.2 /0 Status: OK

AdvRtr: 10.10.10.4 Nghb: 10.10.10.3 OSPF/0/0.0.0.0

LocIp/Id 100.100.101.1 /0 Status: OK

===================================================================================

*A:Dut-C# tools dump router te-database detail ospf

===================================================================================

Rtr: 10.10.10.3 Addr: 10.10.10.3 OSPF/0/0.0.0.0

Rtr: 10.10.10.4 Addr: 0.0.0.0 OSPF/0/0.0.0.0

-----------------------------------------------------------------------------------

AdvRtr: 10.10.10.3 Nghb: 10.10.10.4 OSPF/0/0.0.0.0

Local Addr: 100.100.101.2 Local Id: 0 If Index: 3

Remote Addr: 0.0.0.0 Remote Id: 0 Link Type: p2p

status: OK

IGP Metric: 100

-----------------------------------------------------------------------------------

AdvRtr: 10.10.10.4 Nghb: 10.10.10.3 OSPF/0/0.0.0.0

Local Addr: 100.100.101.1 Local Id: 0 If Index: 0

Remote Addr: 0.0.0.0 Remote Id: 0 Link Type: p2p

status: OK

IGP Metric: 100

===================================================================================

*A:Dut-C#

Platforms

All

ospf

Syntax

ospf [ospf-instance | all]

Context

[Tree] (show>router ospf)

Full Contexts

show router ospf

Description

Commands in this context display OSPF information.

Parameters

ospf-instance—

Shows the specified OSPF instance.

Values—

0 to 31

all—

Shows all configured OSPF instances.

Platforms

All

ospf

Syntax

ospf [ospf-instance]

Context

[Tree] (clear>router ospf)

Full Contexts

clear router ospf

Description

This command clears and resets OSPF protocol entities.

Parameters

ospf-instance—

Clears the specified OSPF instance.

Values—

0 to 31

Platforms

All

ospf

Syntax

ospf

Context

[Tree] (show ospf)

Full Contexts

show ospf

Description

This command displays OSPFv2 related information for all instances.

Platforms

All

ospf

Syntax

ospf

Context

[Tree] (tools>dump>router ospf)

Full Contexts

tools dump router ospf

Description

This command enters the context to dump OSPFv2 related information.

Platforms

All

ospf

Syntax

ospf

Context

[Tree] (tools>perform>router ospf)

Full Contexts

tools perform router ospf

Description

Commands in this context perform OSPFv2 tasks.

Platforms

All

ospf

Syntax

ospf [ospf-instance]

Context

[Tree] (monitor>router ospf)

Full Contexts

monitor router ospf

Description

Commands in this context configure monitor commands for the OSPF instance.

Parameters

ospf-instance—

Specifies the OSPF instance.

Values—

0 to 31

Platforms

All

18.16. ospf3

ospf3

Syntax

ospf3 [instance ospf-instance] [area area-id]

Context

[Tree] (tools>dump>router>te-database ospf3)

Full Contexts

tools dump router te-database ospf3

Description

Commands in this context dump the OSPF3 traffic engineering database.

Parameters

ospf-instance—

Specifies the OSPF3 instance.

Values—

0 to 31 (ipv6-unicast address-family), 64 to 95 (ipv6-unicast address-family)

area-id—

Specifies the OSPF3 area ID.

Values—

ip-address, 0 to 4294967295

Output

The following outputs are examples of OSPF3 traffic engineering database information.

Sample Output

*A:Dut-C# tools dump router te-database ospf3

===================================================================================

Rtr: 10.10.10.5 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0

Rtr: 255.0.0.0 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0

AdvRtr: 10.10.10.5 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0

LocIp/Id 0.0.0.0 /4 Status: NO-RTRID

AdvRtr: 255.0.0.0 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0

LocIp/Id 0.0.0.0 /2 Status: NO-RTRID

Net: 0.0.0.4:10.10.10.5 RTR V6 EXP OSPFv3/0/0.0.0.0

AttRtr: 10.10.10.5 EXP OSPFv3/0/0.0.0.0

AttRtr: 255.0.0.0 EXP OSPFv3/0/0.0.0.0

===================================================================================

*A:Dut-C#

*A:Dut-C# tools dump router te-database detail ospf3

===================================================================================

Rtr: 10.10.10.5 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0

Pfx: 2001:db8::3/128 INTRA-AREA Metric: 0 EXP

Pfx: 2001:db8:1::/64 INTRA-AREA Metric: 0 EXP

Rtr: 255.0.0.0 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0

Pfx: 2001:db8::5/128 INTRA-AREA Metric: 0 EXP

-----------------------------------------------------------------------------------

AdvRtr: 10.10.10.5 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0

Local Addr: 0.0.0.0 Local Id: 4 If Index: 4

Remote Addr: 0.0.0.0 Remote Id: 4 Link Type: TRANS

status: NO-RTRID

IGP Metric: 100

-----------------------------------------------------------------------------------

AdvRtr: 255.0.0.0 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0

Local Addr: 0.0.0.0 Local Id: 2 If Index: 0

Remote Addr: 0.0.0.0 Remote Id: 4 Link Type: TRANS

status: NO-RTRID

IGP Metric: 100

-----------------------------------------------------------------------------------

Net: 0.0.0.4:10.10.10.5 RTR V6 EXP OSPFv3/0/0.0.0.0

AttRtr: 10.10.10.5 EXP OSPFv3/0/0.0.0.0

AttRtr: 255.0.0.0 EXP OSPFv3/0/0.0.0.0

===================================================================================

*A:Dut-C#

Platforms

All

ospf3

Syntax

ospf3 [ospf-instance]

Context

[Tree] (tools>perform>router ospf3)

Full Contexts

tools perform router ospf3

Description

Commands in this context perform OSPF3 tasks.

Parameters

ospf-instance—

Shows the specified OSPF3 instance.

Values—

0 to 31 | 64 to 95

0 to 31 — IPv6-unicast address-family

64 to 95— IPv4-unicast address-family

Platforms

All

ospf3

Syntax

ospf3 [ospf-instance | all]

Context

[Tree] (show>router ospf3)

Full Contexts

show router ospf3

Description

Commands in this context display OSPF3 information.

Parameters

ospf-instance—

Shows the specified OSPF3 instance.

Values—

0 to 31 | 64 to 95

0 to 31 — IPv6-unicast address-family

64 to 95— IPv4-unicast address-family

all—

Shows all configured OSPF3 instances.

Platforms

All

ospf3

Syntax

ospf3 [ospf-instance]

Context

[Tree] (clear>router ospf3)

Full Contexts

clear router ospf3

Description

This command clears and resets OSPF3 protocol entities.

Parameters

ospf-instance—

Clears the specified OSPF3 instance.

Values—

0 to 31 | 64 to 95

0 to 31 — IPv6-unicast address-family

64 to 95 — IPv4-unicast address-family

Platforms

All

ospf3

Syntax

ospf3

Context

[Tree] (show ospf3)

Full Contexts

show ospf3

Description

This command displays OSPFv3 related information for all instances.

Platforms

All

ospf3

Syntax

ospf3

Context

[Tree] (tools>dump>router ospf3)

Full Contexts

tools dump router ospf3

Description

Commands in this context dump OSPFv3 related information.

Platforms

All

ospf3

Syntax

ospf [ospf-instance]

Context

[Tree] (monitor>router ospf3)

Full Contexts

monitor router ospf3

Description

Commands in this context configure monitor commands for the OSPF3 instance.

Parameters

ospf-instance—

Specifies the OSPF3 instance.

Values—

ospf-instance	0 to 31, 64 to 95
	0 to 31	ipv6-unicast address-family
	64 to 95	ipv4-unicast address-family

Platforms

All

18.17. overload

overload

Syntax

overload

overload card slot-number fp fp-number

overload card slot-number fp fp-number cpm-ip

overload card slot-number fp fp-number cpm-ipv6

overload card slot-number fp fp-number cpm-mac

overload card slot-number fp fp-number ip ip-filter-id direction direction

overload card slot-number fp fp-number ipv6 ipv6-filter-id direction direction

overload card slot-number fp fp-number mac mac-filter-id direction direction

Context

[Tree] (tools>dump>filter overload)

Full Contexts

tools dump filter overload

Description

This command, when used without parameters, allows the operator to identify filter memory banks with one or more policies in overload in the system by slot number, FP number, direction (ingress or egress), and type (IP-MAC or IPv6).

The command, when used with only the card and fp parameters, lists the filter policy ID as well as the number of entries in overload on a specified FP when the optional parameters slot-number and fp-number are specified.

This command, when used with the ip, ipv6, or mac parameters in conjunction with the direction parameter, displays the entries not programmed for a specified filter policy due to an overload condition.

This command, when used with the cpm-ip, cpm-ipv6, or cpm-mac parameters, displays the entries not programmed for a specified CPM filter policy. This command is available on applicable platforms only. Refer to the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide, CPM Filters and Traffic Management section for more details.

Parameters

slot-number—

Specifies the IOM slot number or CPM for the overload command.

Values—

1 to 10

Values—

A (when used with cpm-ip, cpm-ipv6, or cpm-mac parameters)

fp-number—

Specifies the FP number.

Values—

1 to 8

ip-filter-id—

Specifies the IP filter policy ID or name for which to display information.

Values—

1 to 65535 (Specifies the policy ID)

name (Specifies a string of up to 64 characters uniquely identifying this filter policy name)

direction—

Specifies the direction.

Values—

ingress or egress

ipv6-filter-id—

Specifies the IPv6 filter policy ID or name for which to display information.

Values—

1 to 65535 (Specifies the policy ID)

name (Specifies a string of up to 64 characters uniquely identifying this filter policy name)

mac-filter-id—

Specifies the MAC filter ID policy for which to display information. Values can be expressed in different formats and refer to static or dynamic filters. The following values only shows decimal integer format.

Values—

1 to 65535

filter-name (Specifies a string of up to 64 characters uniquely identifying this filter policy name)

Output

The following output is an example of filter overload status.

Sample Output

*A:Dut# tools dump filter overload

==========================================================

Filter Overload Status

==========================================================

Slot FP Dir Type

----------------------------------------------------------

1 1 Ing ip-mac

1 1 Egr ipv6

==========================================================

Sample overload output with card and fp parameters only:

A:Dut# tools dump filter overload card 1 fp 1

==========================================================

Filter Overload Status

==========================================================

Slot FP Dir Type Filter #Entries

----------------------------------------------------------

1 1 Ing ip 5 1

1 1 Egr ipv6 40008 10

==========================================================

Sample overload output with card, fp, {cpm-ip, cpm-ipv6, or cpm-mac} parameters only:

*A:Dut# tools dump filter overload card "a" fp 1 cpm-ipv6

==========================================================

Filter Overload Status

==========================================================

Slot FP Dir Type Filter Entry

----------------------------------------------------------

A 1 cpm-ipv6 168

==========================================================

Sample overload output with card, fp, {ip, ipv6, or mac} and direction parameters only:

*A:Dut# tools dump filter overload card 1 fp 1 ip 9 direction ingress

==========================================================

Filter Overload Status

==========================================================

Slot FP Dir Type Filter Entry

----------------------------------------------------------

1 1 Ing ip 9 100

==========================================================

Platforms

All

overload

Syntax

overload {rtm | fib | prefix-limit}

Context

[Tree] (clear>router>isis overload)

Full Contexts

clear router isis overload

Description

This command clears the IS-IS overload.

Parameters

rtm—

Clears the overload because IS-IS reached the configured maximum route limit set with maximum-routes or maximum-ipv6-routes in a VPRN.

fib—

Clears the overload because adding routes to the hardware FIB failed.

prefix-limit—

Clears the overload when IS-IS has reached the configured maximum prefix limit set with the prefix-limit command.

Platforms

All

overload

Syntax

overload {rtm | fib | rtr-adv-lsa-limit}

Context

[Tree] (clear>router>ospf overload)

[Tree] (clear>router>ospf3 overload)

Full Contexts

clear router ospf overload

clear router ospf3 overload

Description

This command clears the OSPF or OSPF3 overload.

Parameters

rtm—

Clears the overload because OSPF or OSPF3 reached the configured maximum route limit set with maximum-routes or maximum-ipv6-routes in a VPRN.

fib—

Clears the overload because adding routes to the hardware FIB failed.

rtr-adv-lsa-limit—

Clears the overload because OSPF or OSPF3 exceeded the configured maximum limit on LSAs advertised by another router, which was set with rtr-adv-lsa-limit.

Platforms

All