Server

The server command is used when the node should operate in client mode with the NTP server specified in the address field. Up to ten NTP servers can be configured. The following example enables NTP and configures the server:

Example: MD-CLI

[ex:/configure system time ntp]
A:admin@node-2# info
    admin-state enable
    server 192.168.1.1 router-instance "Base" {
        key-id 1
    }

Example: classic CLI

config>system>time>ntp# info
----------------------------------------------
                no shutdown
                server 192.168.1.1 key 1
----------------------------------------------