The following example shows basic syntax to configure channelized STM1/OC3 parameters:
config# port port-id
— sonet-sdh
— framing {sonet | sdh}
— group sonet-sdh-index payload {tu3 | vt2 | vt15}
— path [sonet-sdh-index]
— payload {sts3 | tug3 | ds3 | e3}
— trace-string [trace-string]
— no shutdown
config# port 5/2/1
— config>port# sonet-sdh
— config>port>sonet-sdh# framing sdh
— config>port>sonet-sdh# path sts3
— config>port>sonet-sdh>path# trace-string "HO-path"
— config>port>sonet-sdh>path# exit
— config>port>sonet-sdh# group tug3-1 payload vt2
— config>port>sonet-sdh# group tug3-3 payload vt2
— config>port>sonet-sdh# path vt2-1.1.1
— config>port>sonet-sdh>path# trace-string "LO-path 3.7.3"
— config>port>sonet-sdh>path# no shutdown
— config>port>sonet-sdh>path# exit
config>port>sonet-sdh# exit
config>port# tdm
config>port>tdm# e1 1.1.1
config>port>tdm>e1# channel-group 1
config>port>tdm>e1>channel-group# timeslots 2-32
config>port>tdm>e1>channel-group# no shutdown
— config>port>tdm>e1>channel-group# exit
— config>port>tdm# e1 3.7.3
config>port>tdm>e1# channel-group 2
config>port>tdm>e1>channel-group# timeslots 2-32
config>port>tdm>e1>channel-group# no shutdown
config>port>tdm>e1>channel-group# exit
The following shows the configuration output:
A:ALA-49>config>port# info
------------------------------------------------------------------------------------
sonet-sdh
framing sdh
path sts3
trace-string "HO-path"
no shutdown
exit
group tug3-1 payload vt2
group tug3-3 payload vt2
path vt2-1.1.1
trace-string "LO-path 3.7.3"
no shutdown
exit
path vt2-3.7.3
no shutdown
exit
exit
tdm
e1 1.1.1
channel-group 1
timeslots 2-32
no shutdown
exit
no shutdown
exit
e1 3.7.3
channel-group 2
timeslots 2-32
no shutdown
exit
no shutdown
exit
exit
no shutdown
----------------------------------------------