Some assemblies have support for QSFP28 or QSFP-DD transceiver modules. These modules have different variants, some of which provide multiple physical ports out of a single module (breakout modules). There is a QSFP28 breakout module that supports ten physical 10 Gb Ethernet ports. On assemblies that support these breakout variants, the front panel cages are modeled as connectors instead of as direct ports. The connector must be configured for the type of breakout module that is to be inserted and then the appropriate ports are created and can be configured. The options for breakout on specific connectors depend on both the card type and level (or XMA type and level). See the applicable installation guides for details.
The connector reference is in the format slot/mda/connector (for example, 1/1/c3) and the ports owned by the connector use the format slot/mda/connector/port. For example, in a 7750 SR-1 with the 6-port QSFP28 mda-e-xp installed in the first MDA slot, initially there are no ports available, only six connectors:
A:bkvm18# show mda
===============================================================================
MDA Summary
===============================================================================
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 1 me6-100gb-qsfp28 up up
*A:bkvm18# show port
===============================================================================
Ports on Slot 1
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
1/1/c1 Up No Down - unkn unkn conn
1/1/c2 Up No Down - unkn unkn conn
1/1/c3 Up No Down - unkn unkn conn
1/1/c4 Up No Down - unkn unkn conn
1/1/c5 Up No Down - unkn unkn conn
1/1/c6 Up No Down - unkn unkn conn
===============================================================================
After configuring a module with four 10 Gb breakout ports in connector position 1/1/c1 and a module with one 100 Gb breakout port in connector position 1/1/c2, the physical ports are created:
A:bkvm18# configure port 1/1/c1 connector breakout c4-10g
A:bkvm18# configure port 1/1/c2 connector breakout c1-100g
A:bkvm18>show port
===============================================================================
Ports on Slot 1
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
1/1/c1 Up No Link Up - unkn unkn conn 40GBASE-SR4
1/1/c1/1 Down No Down 9212 9212 - netw null xgige
1/1/c1/2 Down No Down 9212 9212 - netw null xgige
1/1/c1/3 Down No Down 9212 9212 - netw null xgige
1/1/c1/4 Down No Down 9212 9212 - netw null xgige
1/1/c2 Down No Link Up - unkn unkn conn 100GBASE-LR4
1/1/c2/1 Down No Down 1578 1578 - netw null cgige
1/1/c3 Up No Down - unkn unkn conn
1/1/c4 Up No Down - unkn unkn conn
1/1/c5 Up No Down - unkn unkn conn
1/1/c6 Up No Down - unkn unkn conn
These physical ports can now be used as Ethernet port references in other commands.
The transceiver information is shown under the connector while Ethernet-related items are shown under the connector ports.
*A:Dut-A# show port 1/1/c1
===============================================================================
QSFP28 Connector
===============================================================================
Description : QSFP28 Connector
Interface : 1/1/c1
Admin State : up
Oper State : up
IfIndex : 104939520
Last State Change : 10/31/2017 13:23:22
Last Cleared Time : N/A DDM Events : Enabled
Breakout : c4-10g
Transceiver Data
Transceiver Status : operational
Transceiver Type : QSFP28
Model Number : 3HE10551AARA01 NOK IPU3BFVEAA
TX Laser Wavelength: 850 nm Diag Capable : yes
Number of Lanes : 4
Connector Code : MPO 1x12 Vendor OUI : 44:7c:7f
Manufacture date : 2017/03/12 Media : Ethernet
Serial Number : INHAG8480890
Part Number : TR-FC85S-NNO
Optical Compliance : 100GBASE-SR4 or 25GBASE-SR
Link Length support: 70m for OM3; 100m for OM4
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM)
===============================================================================
Value High Alarm High Warn Low Warn Low Alarm
-------------------------------------------------------------------------------
Temperature (C) +29.8 +80.0 +75.0 -5.0 -10.0
Supply Voltage (V) 3.29 3.63 3.46 3.14 2.97
===============================================================================
===============================================================================
Transceiver Lane Digital Diagnostic Monitoring (DDM)
===============================================================================
High Alarm High Warn Low Warn Low Alarm
-------------------------------------------------------------------------------
Lane Tx Bias Current (mA) 12.0 10.0 4.5 3.0
Lane Tx Output Power (dBm) 5.40 2.40 -8.40 -11.40
Lane Rx Optical Pwr (avg dBm) 5.40 2.40 -10.30 -13.30
-------------------------------------------------------------------------------
Lane ID Temp(C)/Alm Tx Bias(mA)/Alm Tx Pwr(dBm)/Alm Rx Pwr(dBm)/Alm
-------------------------------------------------------------------------------
1 - 7.1 -0.08 -4.56
2 - 0.0/L-WA -40.00/L-WA -40.00/L-WA
3 - 0.0/L-WA -40.00/L-WA -40.00/L-WA
4 - 0.0/L-WA -40.00/L-WA -40.00/L-WA
===============================================================================
===============================================================================
*A:Dut-A#
*A:Dut-A#
*A:Dut-A# show port 1/1/c1/1
===============================================================================
Ethernet Interface
===============================================================================
Description : 10-Gig Ethernet
Interface : 1/1/c1/1 Oper Speed : 10 Gbps
Link-level : Ethernet Config Speed : N/A
Admin State : up Oper Duplex : full
Oper State : up Config Duplex : N/A
Physical Link : Yes MTU : 9212
Single Fiber Mode : No Min Frame Length : 64 Bytes
IfIndex : 104939521 Hold time up : 0 seconds
Last State Change : 10/31/2017 13:23:23 Hold time down : 0 seconds
Last Cleared Time : N/A
Phys State Chng Cnt: 1 RS-FEC Mode : None
Configured Mode : network Encap Type : null
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
PBB Ethertype : 0x88e7
Ing. Pool % Rate : 100 Egr. Pool % Rate : 100
Ing. Pool Policy : n/a
Egr. Pool Policy : n/a
Net. Egr. Queue Pol: default
Egr. Sched. Pol : n/a
HS Scheduler Plcy : default
HS Port Pool Plcy : default
Monitor Port Sched : Disabled
Monitor Agg Q Stats: Disabled
Auto-negotiate : N/A MDI/MDX : N/A
Oper Phy-tx-clock : not-applicable
Accounting Policy : None Collect-stats : Disabled
Acct Plcy Eth Phys : None Collect Eth Phys : Disabled
Egress Rate : Default Ingress Rate : Default
Load-balance-algo : Default LACP Tunnel : Disabled
Access Bandwidth : Not-Applicable Booking Factor : 100
Access Available BW: 0
Access Booked BW : 0
Sflow : Disabled
Suppress Threshold : 2000 Reuse Threshold : 1000
Max Penalties : 16000 Max Suppress Time: 20 seconds
Half Life : 5 seconds
Down-when-looped : Disabled Keep-alive : 10
Loop Detected : False Retry : 120
Use Broadcast Addr : False
Sync. Status Msg. : Disabled Rx Quality Level : N/A
Tx DUS/DNU : Disabled Tx Quality Level : N/A
SSM Code Type : sdh
Down On Int. Error : Disabled DOIE Tx Disable : N/A
CRC Mon SD Thresh : Disabled CRC Mon Window : 10 seconds
CRC Mon SF Thresh : Disabled
EFM OAM : Disabled EFM OAM Link Mon : Disabled
Ignr EFM OAM State : False
Configured Address : 00:03:fa:2b:ef:1a
Hardware Address : 00:03:fa:2b:ef:1a
Cfg Alarm : remote local
===============================================================================
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
Utilization (300 seconds) 0.00% 0.00%
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
In Pause Frames : 0 Out Pause Frames : 0
===============================================================================