Only the TDM satellite has native SONET/SDH ports.
When an Ethernet port is configured in WAN mode (xgig wan), you can change specific SONET/SDH parameters to reflect the SONET/SDH requirements for this port.
The following CLI output shows an example of a SONET/SDH configuration for a WAN PHY Ethernet port:
*A:7950 XRS-20>config>port# info
----------------------------------------------
shutdown
ethernet
xgig wan
exit
sonet-sdh
tx-dus
suppress-lo-alarm
threshold ber-sd rate 4
section-trace increment-z0
path
trace-string "hello"
report-alarm pais
signal-label 0x20
exit
exit
----------------------------------------------