Configuration with fate sharing on node-3

In this example, the SAPs monitoring the operational groups do not need CFM if the corresponding SAP on the CE side is using fate sharing.

Node-1:

#--------------------------------------------------
echo "Service Configuration"  Oper-groups 
#--------------------------------------------------
    service
        customer 1 create
            description "Default customer"
        exit
        sdp 2 mpls create
          ...

        exit
        pw-template 1 create
            vc-type vlan
        exit
        oper-group "og-name-et" create
        exit
        epipe 1 customer 1 create
            service-mtu 500
            bgp
                route-distinguisher 65000:1
                route-target export target:65000:1 import target:65000:1
            exit
            site "site-1" create
                site-id 1
                sap 1/1/2:1.1
                boot-timer 100
                site-activation-timer 2
                no shutdown
            exit
            endpoint "x" create
            exit
            endpoint "y" create
            exit
            sap 1/1/2:1.1 endpoint "x" create
                eth-cfm
                    mep 130 domain 100 association 1 direction down
                        fault-propagation-enable use-if-tlv
                        ccm-enable
                        no shutdown
                    exit
                exit
                oper-group "og-name-et"
            exit
            spoke-sdp 2:1 endpoint "y" create
                precedence primary
                no shutdown
            exit
            spoke-sdp 3:1 endpoint "y" create
                precedence 2
                no shutdown
            exit
            no shutdown
        exit
        epipe 2 customer 1 create
            description "Epipe 2 in opergroup with Epipe 1"
            service-mtu 500
            bgp
                route-distinguisher 65000:2
                route-target export target:65000:2 import target:65000:2
            exit
            endpoint "x" create
            exit
            endpoint "y" create
            exit
            sap 1/1/2:1.2 endpoint "x" create
                monitor-oper-group "og-name-et"
            exit
            spoke-sdp 2:2 vc-type vlan endpoint "y" create
                precedence 1
                no shutdown
            exit
            spoke-sdp 3:2 vc-type vlan endpoint "y" create
                precedence 2
                no shutdown
            exit
            no shutdown               
        exit
        
    exit

Node-3:

#--------------------------------------------------
echo "Eth-CFM Configuration" 
#--------------------------------------------------
    eth-cfm
        domain 100 format none level 3
            association 1 format icc-based name "node-3-site-1-0"
                bridge-identifier 1
                exit
                ccm-interval 1
                remote-mepid 130
            exit
            association 2 format icc-based name "node-3-site-2-0"
                bridge-identifier 2
                exit
                ccm-interval 1
                remote-mepid 120
            exit
        exit
    exit

#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------

  eth-tunnel 2
        description "Eth Tunnel loadsharing mode QinQ example"
        protection-type loadsharing
        ethernet
            encap-type qinq
        exit
        path 1
            member 1/1/1
            control-tag 1.1
            eth-cfm
                mep 310 domain 100 association 1
                    ccm-enable
                    control-mep
                    no shutdown
                exit
            exit
            no shutdown
        exit
        path 2
            member 1/1/2
            control-tag 1.1
            eth-cfm
                mep 320 domain 100 association 2
                    ccm-enablepath 
                    control-mep
                    no shutdown
                exit
            exit
            no shutdown
        exit
        no shutdown
    exit


#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
    service
        epipe 1 customer 1 create
            sap 1/10/1:1 create
            exit
            sap eth-tunnel-1 create
            exit
            no shutdown
        exit
#--------------------------------------------------
echo "Service Configuration for a shared fate Ethernet Tunnel"
#--------------------------------------------------
        epipe 2 customer 1 create
            sap 1/10/2:3 create
            exit
            sap eth-tunnel-1:2 create
                eth-tunnel
                    path 1 tag 1.2
                    path 2 tag 1.2
                exit
            exit
            no shutdown
        exit