An operator can use IP lists to define a list of IP addresses (along with any masks). This list can be later referenced in AQPs, application filters or session-filters.
Use the following CLI syntax to configure an application filter entry:
config>aa>group>policy>app-assurance>group <aa-group-id>[:<partition>]
ip-prefix-list <prefix-list-name> [create]
no ip-prefix-list <prefix-list-name>
description <description>
no description
prefix <address/mask> [name <prefix-name>]
no prefix <address/mask>
The following example displays an IP prefix list configuration:
*A:Dut-A>config>app-assure>group# ip-prefix-list AllowedLAN1Hosts create
*A:Dut-A>config>app-assure>group>pfx>$ description "allowed hosts"
*A:Dut-A>config>app-assure>group>pfx>$ prefix 10.10.8.2/32
*A:Dut-A>config>app-assure>group>pfx>$ prefix 10.10.8.180/32
*A:Dut-A>config>app-assure>group>pfx>$ prefix 10.10.8.231/32
*A:Dut-A>config>app-assure>group>pfx>$ exit
*A:Dut-A>config>app-assure>group#
*A:Dut-A>config>app-assure>group# ip-prefix-list "AllowedLan1Hosts"
*A:Dut-A>config>app-assure>group>pfx># info
----------------------------------------------
description "allowed hosts"
prefix 10.10.8.2/32
prefix 10.10.8.180/32
prefix 10.10.8.231/32
----------------------------------------------
*A:Dut-A>config>app-assure>group>pfx>#