Use the following syntax to provision an ESA.
config>esa esa-id
vm vm-id
vm-type {aa | bb}
The following example shows an ESA containing both a VM-type AA and a VM-type BB.
configure
esa 1 create
description "Esa for AA-BB"
host-port 7/1/c6/1
vm 1 create
description "Application-Assurance ISA"
vm-type aa
host-port 7/1/c6/1
cores 12
memory 20
no shutdown
exit
vm 2 create
description "Broadband ISA"
vm-type bb
host-port 7/1/c6/1
cores 9
memory 40
no shutdown
exit
The following output displays an ESA and ESA-VM for the preceding configuration example.
show esa
=========================================================================
Extended Services Appliance Summary
=========================================================================
ESA Description Admin Oper
State State
--------------------------------------------------------------------------
1 up up
==========================================================================
show esa detail
===============================================================================
ESA 1
===============================================================================
Description : Esa for AA-BB
Admin State : up
Operational State : up
Oper flags : none
IOM Host Port : 7/1/c6/1
Hardware Data
System manufacturer : Nokia Solutions and Networks
System product name : ESA-100G
System serial number : QTFCT99040103
Software Version : TiMOS-H-19.10.S24 hypervisor/esa Copyright (c)
2000-2019 Nokia. All rights reserved. All use
subject to applicable license agreements. Built
on Wed Oct 23 20:35:01 PDT 2019 by builder in /
builds/c/1910S/S24/panos/hypervisors
Time of last boot : 2019/10/24 14:49:58 UTC
Cores available : 23
Cores allocated : 23
Cores remaining : 0
Memory available : 192 GB
Memory allocated : 60 GB
Memory remaining : 132 GB
Performance enabled : yes
Export restricted : no
=========================================================================